Materials:

• Crochet Hook: Size G6 / 4mm (I use these crochet hooks that have an ergonomic soft handle)
• Yarn: any Worsted Weight 4 ply yarn is fine.
• Colors: Off White and Black
• Craft Eyes: 6mm Solid Black Plastic Craft Eyes with safety backing (available here)
• Craft Felt : Black, 2 small patches
• Needle and black thread: for sewing on felt patches
• Yarn or Tapestry Needle: for sewing parts together
• Pins: for holding parts together while you sew
• Poly-fil: polyester fiberfill for stuffing
• Scissors

SC = Single Crochet
ST= Stitch
INC = Increase
DEC = Decrease

To change color of the yarn, begin the single crochet with the first color. This should leave you with two loops on your hook. Now grab the second color with the hook and pull it through both loops to complete the stitch. Now continue the next single crochet in the second color.

MUZZLE
Off White yarn. Start with Chain 2.
R1: 5 SC in second chain from hook (5)
R2: SC 3, INC 2 (7)
R3: INC 1, SC 3, INC 3 (11)
R4: SC 2 (2) Yes, that’s right, this row only has 2 stitches and should finish off at the top of the muzzle. Fasten off leaving a 10 inch (25 cm) tail for sewing on to head.

Because the muzzle is so small, instead of stuffing with poly-fil, I use left over bits of off white yarn. Sew on nose and mouth with black yarn.

HEAD
Off White yarn. Start with Chain 2
R1: 6 SC in second chain from hook (6)
R2: INC 1 in each ST (12)
R3: * SC 1, INC 1 * repeat 6 times (18)
R4: * SC 2, INC 1 * repeat 6 times (24)
R5: * SC 2, INC 1 * repeat 8 times (32)
R6: SC in each ST (32)
R7: * SC 3, INC 1 * repeat 8 times (40)
R8: SC in each ST (40)
R9: as above (40)
R10: as above (40)
R11: as above (40)
R12: * SC 3, DEC 1 * repeat 8 times (32)
R13: SC in each ST (32)
R14: * SC 2, DEC 1 * repeat 8 times (24)
Insert eyes through the patches of felt by cutting a tiny slit in the felt. Place into position on the head and sew patches onto the head. Fasten on the safety backings.
R15: * SC 1, DEC 1 * repeat 8 times (16)
R16: * SC 2, DEC 1 * repeat 4 times (12)
R17: SC in each ST (12) Fasten off and stuff with poly:fil.

EARS (make 2)
Black yarn. Start with chain 2
R1: 6 SC in second chain from hook (6)
R2: INC 1 in each ST (12)
R3: SC in each ST (12)
R4: as above (12) Fasten off, leave a 6 inch (15 cm) tail for sewing onto head, flatten the ears so that they are in the shape of a half circle and two layers thick, no need to stuff with poly-fil.

BODY
Off White yarn. Start with Chain 2.
R1: 5 SC in second chain from hook (5)
R2: INC 1 in each ST (10)
R3: * SC 1, INC 1 * repeat 5 times (15)
R4: INC 1 in each ST (30)
R5: SC in each ST (30)
R6: as above (30)
R7: as above (30)
R8: as above (30)
R9: * SC 4, DEC 1 * repeat 5 times (25)
Change to black yarn
R10: SC in each ST (25)
R11: as above (25)
R12: * SC 3, DEC 1 * repeat 5 times (20)
R13: SC in each ST (20)
R14: *SC 2, DEC 1 * repeat 5 times (15)
R15: SC in each ST (15)
R16: as above (15) Fasten off, leaving a 10 inch (25 cm) tail for sewing onto head, stuff with poly-fil.

ARMS (make 2)
Black yarn. Start with Chain 2.
R1: 6 SC in second chain from hook (6)
R2: INC 1 in each ST (12)
R3: SC in each ST (12)
R4: * SC 2, DEC 1 * repeat 3 times (9)
R5: SC in each SC (9)
R6 to R9: as above (9) Fasten off, leaving a 9 inch (20 cm) tail for sewing onto body, stuff with poly-fil.

LEGS (make 2)
Black yarn. Start with Chain 2.
R1: 6 SC in second chain from hook
R2: INC 1 in each ST (12)
R3: SC in each ST (12)
R4: SC 3, DEC 1, SC 1, DE1, SC 4 (10)
R5: SC in each ST (10)
R6 to R8: as above (10) Fasten off, leaving a 9 inch (20 cm) tail for sewing onto body, stuff with poly-fil.

TAIL
Black yarn. Start with Chain 2.
R1: 4 SC in second chain from hook. (4)
R2: INC 1 in each ST (8)
R3: SC in each ST (8) Fasten off leaving a 6 inch (15 cm ) tail for sewing onto the back of the body. No need to stuff with poly-fil.

Pin the parts in place and sew together with a yarn needle.

Free master class from Svetlana Voronkova on knitting a panda in a sailor suit. The height of the crocheted toy is about 23 cm. To make such a teddy bear, the author used Pekhorka’s “Children’s novelty” yarn and a 2 mm hook. From the description of the scheme, you will also learn how to tie a beret and a vest to decorate our cute panda.

Materials:
Yarn “Children’s novelty” from Pekhorka, 200m in 50g,
100% acrylic, colors – white, black, blue and red;
Hook # 2;
Filler;
Ready eyes 12mm;
Scissors;
Glue;
Needle for sewing on parts;
Glue;
Felt for peephole – white;
From the specified materials, the height of the toy is 23cm. You
you can knit from any yarn you are used to.

Legend:
mr : magic ring
sc : single crochet
dc : double crochet
ch : chain
dec : decrease
inc : increase
BLO : back loop only
FLO : front loop only

After in brackets is the number of repetitions of
what’s in brackets.
In brackets at the end of the row, the number of loops in
row.
The toy is knitted in a spiral, without lifting loops.
We stuff in the knitting process.

Handles (2 parts)

We knit in black, we do not follow it.

6 sc in mr;

1st row: 6 inc (12);

2nd row: (sc, inc) * 6 (18);

Rows 3-7: 18 sc;

8 row: (7 sc, dec) * 2 (16);

9 row: 16 sc;

10 row: (6 sc, dec) * 2 (14);

Rows 11-23: 14 sc;

Half fill the handles. Cut the thread, end
hide.

Legs (2 parts)

Knit in black, marker on the back.

Cast on 5 ch, then knit from the second loop from the hook mr.

Row 1: 3 sc, 3 sc on the last st of the chain, 2 sc,

inc (10);

2nd row: inc, 2 sc, 3 inc, 2 sc, 2 inc (16);

3rd row: sc, inc, 2 sc, (sc, inc) * 3, 2 sc, (sc, inc) * 2 (22);

4th row: 2 sc, inc, 2 sc, (2 sc, inc) * 3, 2 sc, (2 sc, inc) * 2

(28);

5 row: knit for BLO 28 sc;

Rows 6-9: 28 sc;

Cut the insole to fit the foot from the dense
cardboard or plastic, paste.

10 row: 7 sc, 6 dec, 7 sc, dec (21);

11 row: 5 sc, 5 dec, 6 sc (16);

12-17 rows: 16 sc;

We stuff our legs tightly enough. Cut the thread and
hide.

Body (1 piece)

We knit in white. Mid-back marker, inc

the need to make an offset loop.

İnc join the white thread to the left leg at the side, with

inside.

1st row: (3 sc, inc) * 4 on the left leg, 4 ch, inc join to

inc next leg, (3 sc, inc) * 4 inc next leg, 2 sc on

chain ch, put a marker;

2nd row: 2 sc along ch chain, 20 sc along left leg, 4 sc

along the chain ch, 20 sc along the other leg, 2 sc (48);

3rd row: (7 sc, inc) * 6 (54);

Rows 4-15: 54 sc;

16 row: (7 sc, dec) * 6 (48);

Rows 17-19: 48 sc;

20 row: (6 sc, dec) * 6 (42);

21 row: 42 sc;

22 row: (5 sc, dec) * 6 (36);

23 row: 36 sc;

Change the color to black, start knitting handles.

24 row: 7 sc, 6 sc with hand loops, 10 sc, 6

sc with other hand loops, 7 sc (36);

25 row: 6 sc, dec from one body loop and one loop

arms, 6 sc across arm, dec from one arm loop and one

body loops, 8 sc, dec from one body loop and one

hand loops, 6 sc on the other hand, dec from one loop

arms and one body loop, 6 sc (36);

Stuff the body pretty tight.

26 row: (4 sc, dec) * 6 (30);

27 row: (3 sc, dec) * 6 (24);

28 row: (2 sc, dec) * 6 (18);

Rows 29-30: 18 sc;

Change the color to white, knit the head.

Head (1 piece)

Marker behind, on the back of the head, we do not follow it.

31 row: knit for FLO (sc, inc) * 9 (27);

32 row: (2 sc, inc) * 9 (36);

33 row: (5 sc, inc) * 6 (42);

34 row: (6 sc, inc) * 6 (48);

35 row: (7 sc, inc) * 6 (54);

36 row: (8 sc, inc) * 6 (60);

37 row: (9 sc, inc) * 6 (66);

38 row: (10 sc, inc) * 6 (72);

39 row: (11 sc, inc) * 6 (78);

Rows 40-54: 78 sc;

55 row: (11 sc, dec) * 6 (72);

56 row: (10 sc, dec) * 6 (66);

57 row: (9 sc, dec) * 6 (60);

58 row: (8 sc, dec) * 6 (54);

59 row: (7 sc, dec) * 6 (48);

Stuff the part quite tightly.

60 row: (6 sc, dec) * 6 (42);

61 row: (5 sc, dec) * 6 (36);

62 row: (4 sc, dec) * 6 (30);

63 row: (3 sc, dec) * 6 (24);

64 row: (2 sc, dec) * 6 (18);

Add filler.

65 row: (sc, dec) * 6 (12);

66 row: 6 dec;

Pull off the hole, cut the thread and crimp.

Tail (1 piece)

We knit in black.

6 sc in MR;

1st row: 6 inc (12);

2nd row: 12 sc;

3 row: (sc, dec) * 4 (8);

Cut the thread, leaving a long end for

inc quest.

Nose (1 piece)

We knit in black, we fill it weakly in the inc process

knitting.

6 sc in MR;

1st row: 6 inc (12);

Rows 2-4: 12 sc;

5 row: 6 dec (6);

Pull the hole, cut the thread, leaving a long

end for embroidery.

Ears (2 parts)

We knit in black, do not stuff.

6 sc in MR;

1st row: 6 inc (12);

2nd row: (sc, inc) * 6 (18);

3rd row: (2 sc, inc) * 6 (24);

Rows 4-6: 24 sc;

Fold the part in half, and tie on both sides

sc.

Eyes (2 parts)

We knit in black.

6 sc in MR;

1st row: 6 inc (12);

2nd row: (sc, inc) * 6 (18);

3rd row: (2 sc, inc) * 6 (24);

4th row: (3 sc, inc) * 6 (30);

5 row: (4 sc, inc) * 6 (36);

Cut the thread, leaving a long end for

inc quest.

Beret (1 piece)

We knit in blue according to the scheme.

I knitted 10 rows according to the pattern. In the last row I have

it turned out 110 dc.

Further as follows.

11 row: (3 dc, dec from dc) * 22 (88);

12 row: (2 dc, dec from dc) * 22 (66);

Rows 13-15: 66 sc;

Vest (1 piece)

We knit in rotary rows, at the end of each row

make a lifting loop, change the color every two

row.

We start in blue. Dial 35 ch, then knit

from the second loop from the hook mr.

1st row: 5 sc, in the next stitch inc knit (sc,

ch, sc), 5 sc, in the next stitch inc we knit (sc,

ch, sc), 10 sc, in the next stitch inc knit

(sc, ch, sc), 5 sc, in the next stitch inc we knit

(sc, ch, sc), 5 sc (38);

2nd row: 6 sc, under ch inc of the previous row inc

(sc, ch, sc), 8 sc, under ch inc of the previous row

inc we knit (sc, ch, sc), 12 sc, under ch

inc of the previous row inc knit (sc, ch, sc), 8 sc,

under ch inc of the previous row inc we knit (sc, ch, sc),

6 sc (46);

Change the color to white

3 row: 7 sc, under ch inc of previous row inc

(sc, ch, sc), 10 row, under ch inc of the previous row

inc we knit (sc, ch, sc), 14 sc, under ch

inc of the previous row inc knit (sc, ch, sc), 10 sc,

under ch inc of the previous row inc we knit (sc, ch, sc),

7 sc (54);

4 row: 8 sc, under ch inc of the previous row inc

(sc, ch, sc), 12 sc, under ch inc of the previous row

inc we knit (sc, ch, sc), 16 sc, under ch

inc of the previous row inc knit (sc, ch, sc), 12 sc,

under ch inc of the previous row inc we knit (sc, ch, sc),

8 sc (62);

Change the color to blue.

5 row: 9 sc, under ch inc of previous row inc

(sc, ch, sc), 14 sc, under ch inc of the previous row

inc we knit (sc, ch, sc), 18 sc, under ch

inc of the previous row inc knit (sc, ch, sc), 14 sc,

under ch inc of the previous row inc we knit (sc, ch, sc),

9 sc (70);

6 row: 10 sc, under ch inc of previous row inc

(sc, ch, sc), 16 sc, under ch inc of the previous row

inc we knit (sc, ch, sc), 20 sc, under ch

inc of the previous row inc knit (sc, ch, sc), 16 sc,

under ch inc of the previous row inc we knit (sc, ch, sc),

10 sc (78);

Change the color to white.

7 row: 11 sc, 5 ch, inc omit 16 sc rut, 22 sc, 5

ch, inc omit 16 sc ruta, 11 sc (54);

8 row: 4 sc, (inc, 4 sc) * 10 (64);

Change the color to blue.

9-10 rows: 64 sc;

Change the color to white.

Rows 11-12: 64 sc;

Change the color to blue.

Rows 13-14: 64 sc;

Change the color to white.

15-16 rows: 64 sc;

Change the color to blue.

Rows 17-18: 64 sc;

Cut the thread.

Assembly
Sew on ears, nose, tail, black circles under the eyes.
Cut ovals from white felt, glue to black
circles. Glue the eyes.
Embroider eyebrows, smile. Put the vest on the panda
sew on the back. Make a pompom from red yarn
and sew on to the beret.
The sailor is ready!

If you enjoy making amigurumi, here I share this easy and free amigurumi pattern for you for free. Your kids will love these toys.

Designer: greenfrog.crochet

Note: Crochet the doll with tight stitches. Each round is worked in a continuous spiral. Do not join rounds with slip stitch or turn unless stated otherwise. Use a stitch marker or a piece of yarn to mark the ending of the round. It’s highly recommended that you read through the pattern completely before beginning to crochet.

Materials & Tools

• Crochet hook suitable with your yarns.
• Yarn : black, white, dark brown, beige, pink. I used crochet hook size 2 mm with sport yarn,160 m/ 50 g
• You can use the same pattern to make smaller or larger toy by using finer or bulkier yarn. 10 mm safety eyes, a button
• Sewing needle, scissor

Skill and Abbreviations

Rnd : round
Ch : chain stitch
slst : slip stitch
sc : single crochet stitch
hdc : half double crochet stitch
dc : double crochet stitch
st, sts : stitch, stitches
FLO : crochet through front loops only
BLO : crochet through back loops only
dec : single crochet 2 stitches in front loops together
inc : single crochet 2 stitches in same sc
inc4 : make 4 single crochet stitches in indicated stitch
inchdc: half double crochet increase
dechdc: half double crochet decrease
incdc: double crochet increase

ARM ( make two )
Begin with black.
Rnd 1: 6 sc in the magic ring (6)
Rnd 2: 6 inc (12)
Rnd 3 – Rnd 5: 12 sc (12)
Rnd 6: ( 1 dec , 4 sc )* repeat 2 times (10)
Rnd 7 – Rnd 21 : 10 sc (10)
Fasten off, leave a long tail.
Stuffing the 2/3 under arm.

LEG ( make two )
First, you will make an oval by crocheting around the foundation chain. Begin with dark brown.
Rnd 1 : Chain 7
Rnd 2 : 1 inchdc on the 2nd chain from the hook, 4 hdc, 6 hdc in same st, 4 hdc, 1 inchdc (18)
Rnd 3 : 2 inchdc, 4 hdc , 6 inchdc, 4 hdc , 2 inchdc (28)
Change the color to beige with the last st of round 3
Rnd 4 : BLO 28 sc (28)
Rnd 5 : 28 sc (28)
Rnd 6 : 6 sc, ( 1 dec, 1 sc)* repeat 2 times, (1 dechdc, 1 hdc)* repeat 2 times, (1 dec, 1 sc)* repeat 2 times, 4 sc. (22)
Rnd 7 : 6 sc , 2 dec, 2 dechdc, 2 dec, 4 sc (16)
Rnd 8 : 7 sc, 2 dec , 5 sc (14)
Change the color to black with the last st of Rnd 8
Rnd 9 : BLO 14 sc (14)
Rnd 10 – Rnd 15 : 14 sc (14)
Fasten off, leave a long tail.
Stuffing hard the shoe and lightly stuffing
1/3 the above of the leg.

EAR ( make two )
You will crochet two separate pieces of the ear then crochet these pieces together to get a finished ear.
The front piece : Begin with white.
Rnd 1 : chain 3
Rnd 2 : 1 sc on the 2nd chain from the hook, 1 inc4, 1 sc. Chain 1 and turn. (6)
Rnd 3 : 1 sc, 4 inc, 1 sc. (10)
Fasten off.
The behind piece : Begin with black.
Rnd 1 – Rnd 3 : do same as the front piece
Chain 1 and turn
Rnd 4 : Put the front piece in front then crochet through both pieces : 10 hdc (10)
Fasten off and leave a long tail.

EYE ( make two )
Begin with black
Rnd 1 : chain 4
Rnd 2 : 1 inc on the 2nd chain from the hook, 1 sc, 1 inc4, 1 sc, 1 inc (10)
Rnd 3 : 1 inc, 3 sc, 2 inc, 3 sc, 1 inc (14)
Rnd 4 : 1 sc, 1 inc, 2 sc, 1 hdc, 1 inchdc, 2 sc, 1 inchdc, 1 hdc, 2 sc, 1 inc, 1 sc (18)
Fasten off and leave a long tail. Put the safety eye in the first chain on Rnd 1.

HEAD
First, you will make an oval by crocheting around the foundation chain. Begin with white
Rnd 1 : chain 9, 1 inc on the 2nd chain from the hook, 6 sc, 1 inc4 , 6 sc , 1 inc (20)
Rnd 2 : 1 inc , 8 sc, 2 inc , 8 sc, 1 inc (24)
Rnd 3 : 1 sc, 1 inc, 8 sc, 1 inc, 2 sc, 1 inc , 8 sc, 1 inc, 1 sc (28)
Rnd 4 : 1 sc, 1 inc, 10 sc, 1 inc, 2 sc, 1 inc, 10 sc, 1 inc, 1 sc (32)
Rnd 5 : 1 sc, 1 inc, 12 sc, 1 inc, 2 sc, 1 inc, 12 sc, 1 inc, 1 sc (36)
Rnd 6 : 1 sc, 1 inc, 2 sc, 1 inc, 8 sc, ( 1 inc, 2 sc) * repeat 3 times, 1 inc, 8 sc, 1 inc, 2 sc, 1 inc, 1 sc (44)
Rnd 7 : 44 sc (44)
Rnd 8 : 2 sc, 1 inc, 16 sc, 1 inc, 4 sc, 1 inc, 16 sc, 1 inc, 2 sc (48)
Rnd 9 : 48 sc (48)
Rnd 10 : 2 sc, 1 inc, 18 sc, 1 inc, 4 sc, 1 inc, 18 sc, 1 inc, 2 sc ( 52)
Rnd 11 – Rnd 12 : 52 sc (52)
Rnd 13: 2 sc, 1 inc, 20 sc, 1 inc, 4 sc, 1 inc, 20 sc, 1 inc, 2 sc (56)
Rnd 14 – Rnd 15 : 56 sc (56)
Rnd 16 : 2 sc, 1 inc, 22 sc, 1 inc, 4 sc, 1 inc, 22 sc, 1 inc, 2 sc (60)
Rnd 17 – Rnd 22 : 60 sc (60)
Rnd 23 : 2 sc, 1 dec, 22 sc, 1 dec, 4 sc, 1 dec, 22 sc, 1 dec, 2 sc (56)
Rnd 24 : 1 dec, 2 sc, 1 dec, 16 sc, 1 dec, 2 sc, 2 dec, 2 sc, 1 dec, 16 sc, 1 dec, 2 sc, 1 dec ( 48)
Rnd 25: ( 2 sc, 1 dec)* repeat 2 times , 8 sc, ( 1 dec, 2 sc)* repeat 2 times, ( 2 sc, 1 dec) repeat 2 times, 8 sc, ( 1 dec, 2 sc) * repeat 2 times (40)
Rnd 26 : ( 1 sc, 1 dec)* repeat 2 times , 8 sc, ( 1 dec, 1 sc)* repeat 2 times, ( 1 sc, 1 dec) * repeat 2 times, 8 sc, ( 1 dec, 1 sc) * repeat 2 times (32)
Rnd 27 : ( 2 sc, 1 dec)* repeat 8 times (24)
Rnd 28 : ( 1 sc, 1 dec)* repeat 8 times (16)
Start stuffing the head, put safety eyes between Rnd 16 and Rnd 17. There are 9 sts inbetween two holes.

BODY
Continue crochet the body after crocheting the head.
Change the color to black with the last st of Round 28.
Rnd 29 : FLO 16 sc (16)
Rnd 30 : ( 1 inc, 7 sc) * repeat 2 times (18)
Rnd 31 : 18 sc (18)
Rnd 32 : ( 2 sc, 1 inc)* repeat 6 times (24)
Rnd 33 – Rnd 34 : 24 sc (24)
Rnd 35 : ( 3 sc, 1 inc)* repeat 6 times (30)
Rnd 36 : 30 sc (30)
Rnd 37 : ( 4 sc, 1 inc)* repeat 6 times (36)
Rnd 38 : 36 sc (36)
Rnd 39 : ( 5 sc, 1 inc)* repeat 6 times (42)
Change the color to white with the last st of Rnd 39
Rnd 40 – Rnd 41: 42 sc (42)
Rnd 42 : ( 6 sc, 1 inc)* repeat 6 times (48)
Rnd 43 – Rnd 49 : 48 sc (48)
Rnd 50 : ( 6 sc, 1 dec)* repeat 6 times (42)
Rnd 51 : 42 sc (42)
Rnd 52 : ( 5 sc, 1 dec)* repeat 6 times (36)
Rnd 53 – Rnd 55 : 36 sc (36)
Stuffing the body.
Fasten off, leave a long tail.
Skip 14 sts, use the left over yarn, sew two side through 4 pairs of stitches on the middle of the body.

TAİL
Begin with black.
Rnd 1 : 6 sc in the magic ring (6)
Rnd 2 : 6 inc (12)
Rnd 3 : ( 1 inc, 1 sc) * repeat 6 times (18)
Rnd 4 : 18 sc(18)
Rnd 5 : ( 1 dec, 1 sc) * repeat 6 times (12)
Rnd 6 : 6 dec (6)
Stuffing the tail. Fasten off and leave a long tail

HAİR
Begin with black.
Rnd 1 : chain 13 , 1 hdc on the 3rd chain from the hook , ( 1 inchdc, 1 hdc) * repeat 4 times, 1 hdc, 1 slst (14)

SHORT
Begin with dark brown.
Left leg
Rnd 1 : Chain 19, sc in the 2nd chain from the hook, 17 sc. slst to join the round and fasten off (18)
Right leg
Rnd 1 : do same as left leg
Join two leg together : you will turn 2 pieces into 1. Change the color to beige with the last st of Rnd 1.
Rnd 2 : 18 hdc on right leg, 18 hdc on left leg. Slst to join the round, chain 1 and turn (36)
From Rnd 3 to Rnd 6 : work in row, do not use the slst to join the round.
Rnd 3 : ( 5 hdc, 1 inchdc) * repeat 6 times.
Chain 1 and turn (42)
Rnd 4 – Rnd 6 : 42 hdc, chain 1 and turn (42)
Change the color to dark brown with the last st of Rnd 6
Rnd 7 : 42 sc. slst to join the round and fasten off.

ASSEMBLİNG
Use some pins, pin ears and eyes on its appropriate position:
Ears : Sew ears on two opposite sides of the head, from Rnd 1 to Rnd 7. There are 7 sts inbetween.
Eyes: Sew eyes with height from Rnd 13 to Rnd 20, width : 8 sts. Sew the white of the eyes
Nose and mouth : Sew nose and mouth with dark brown yarn
Hair : Sew hair on Rnd 1 on the head

Cheeks : Sew cheeks with pink yarn between Rnd 20 and Rnd 21, width : 3 sts.
Arms: Fold two sides of the arm, sew the arm on Rnd 34, sew through two sides of the arm and Rnd 34.
Legs : Sew the leg on the body, pierce the needle through 2 sides : 1 sc on the leg and 1 sc on the body.
Tail: Sew tail on the back between Rnd 47 and Rnd 50.

More Amigurumi Panda Ideas: