Materials:
Approx 20g of worsted (aran) weight yarn in a main color and accent color
Crochet Hook in Size 3.25
Tapestry Needle
Polyfil or preferred stuffing
6mm safety eyes
stitch marker
Embroidery thread for mouth

Abbreviations
SC- single crochet
SC INC- single crochet increase (2 SC in each stitch)
HDC- Half Double Crochet
DC- Double Crochet
TRC- Triple Crochet
INV DEC- Invisible decrease (put hook through the FRONT LOOP ONLY of two consecutive stitches [two loops on hook] Yarn over pull through both loops. [two loops on hook] Yarn over pull through two loops)
Magic Circle- Make a loop, leaving a long tail to work with. Insert hook in center of loop, yarn over and draw up a loop. Yarn over, pull through to make the first chain (this does not count as a stitch!). Continue to crochet over the loop and tail with the number of stitches called for. (If you need 6 SC, then crochet 6 SC inside the ring.) Pull the tail to close the circle.

Amigurumi Jellyfish Free Pattern

Jellyfish Head
Round 1: Leave a long tail (you will use this to sew on the keychain), then 6 SC in a magic circle.
Round 2: SC INC in each around. (12)
Round 3: SC in first, SC INC in next. Repeat around. (18)
Round 4: SC in first 2, SC INC in next. Repeat around. (24)
Round 5: SC in first 3, SC INC in next. Repeat around. (30)
Rounds 6-11: SC in each around. (30)
Skip one stitch and *DC 3x in one stitch. Skip another stitch and slip stitch to the next.* Repeat * * around. Slip stitch one more time and fasten off. Leave a long tail to sew the bottom/tentacles on.
Attach safety eyes between rows 8 and 9 about 4 stitches apart. Sew on the mouth with embroidery thread. You can sew the keychain on will the long tail you used at the beginning. If you want to wait until the end, make sure you weave the end so it on the outside of the head, then sew it on at the end.

Jellyfish Bottom/straight tentacles
Round 1: 6 SC in a magic circle.
Round 2: SC INC in each around. (12)
Round 3: SC in first, SC INC in next. Repeat around. (18)
Round 4: SC in first 2, SC INC in next. Repeat around. (24)
Round 5: SC in the first 4. Chain 20. In the second chain from hook, slip stitch in the remaining 19 chains back. SC in the same stitch that you chained from. (This is the tentacle. Repeat 5 more times. Fasten off and weave in the end.

Curly Middle Tentacles
Chain 20. In the second chain from the hook, SC INC. SC INC in each remaining chain. Once you reach the top, repeat 2 more times. Fasten off and leave a long tail. Sew the tops of the tentacles closer together and attach to the middle of the bottom tentacle piece.

Assembly
Stuff the head as well as you can (you might need to finish it a little bit more after sewing.) Place the tentacles inside the head, lined up right above the scallops, on the 11th row. Use pins to keep it in place. Using the long tail from the head, attach the bottom tentacles by sewing it neatly on. If you need to stuff it a little more, make sure to do so before you attach it completely.

More Amigurumi Jellyfish İdeas

Supplies:
4mm crochet hook, 4/Medium
weight yarn in Main Color and
Cone Color. 9mm safety eyes,
tapestry needle, scissors, keychain
(optional), and stufng.

Additional Information:
Difculty: Easy
Make a big ice cream and a mini
scrap,/keychain version! This
pattern refers to “Main Color”. This
is the main color you will use for
your ice cream. We start by
creating the ice cream top, then the
cone, and we then sew them
together. Next, you can create a
mini ice cream, in which we sew on
a keychain and then assemble the
cone and ice cream together

Ice Cream Top:
IN MAIN COLOR
Round 1: 6 Sc in Magic Ring (6)
Round 2: Inc all around (12)
Round 3: Inc, Sc all around (18)
Round 4: Inc, Sc 2 all around (24)
Round 5: Inc, Sc 3 all around (30)
Round 6: Inc, Sc 4 all around (36)
Round 7: Inc, Sc 5 all around (42)
Round 8-11: Sc all around (42)
Round 12: Sc in the next 12 st. Sc in
the next st and add a different
colored stitch marker to the sc just
made. This marks where to place
the safety eye later. Sc in the next 4
st. Sc in the next st and add a
different colored stitch marker to
the sc just made. Sc in the next 24
st (42)
Round 13-16: Sc all around (42)
Add safety eyes in marked areas
now.
Round 17: Dec, Sc 5 all around
(36)
Round 18: Dec, Sc 4 all around
(30)
Round 19: In the FLO (Front Loop
Only),Dc 4 times in the next stitch, SlSt in the next stitch all around
(75)
Finish off and leave a long tail for
sewing. Set the ice cream aside for
now and we will assemble it to the
cone later

Cone:
IN CONE COLOR
Round 1: 6 Sc in Magic Ring (6)
Round 2: Inc all around (12)
Round 3-4: Sc all around (12)
Round 5: Inc, Sc all around (18)
Round 6-8: Sc all around (18)
Round 9: Inc, Sc 2 all around (24)
Round 10-11: Sc all around (24)
Round 12: Inc, Sc 3 all around
(30)
Round 13-14: Sc all around (30)
Round 15: Inc, Sc 4 all around
(36)
Round 16-17: Sc all around (36)
Finish off. Continue to “Assembly”.

Ice Cream Assembly:
IN MAIN COLOR
Take the tail of the yarn from the
ice cream and insert it into a
needle. Weave that tail of yarn to
the BLO left from Round 19 (Pic 1).
Line up the ice cream and cone as
shown, making sure the two tails of
yarn align (Pic 2). Sew them
together, going from the back loop
only from the ice cream to the cone
(Pic 3-5). Continue this until it’s
almost completely sewed shut.
Stuff here (Pic 6). Continue sewing
closed. Tie a knot with both ends of
yarn and weave them into the cone

Smile:
IN BLACK EMBROIDERY THREAD
Insert needle with thread into the
middle mouth area of the ice cream
and pull needle out around the left
eye as shown. Reinsert
needle into the original middle
insertion spot and pull needle out
around the right eye as shown.
Reinsert needle into the original
insertion spot. Done!

Mini Ice Cream Top:

IN MAIN COLOR
Round 1: 6 Sc in Magic Ring (6)
Round 2: Inc all around (12)
Round 3: Inc, Sc all around (18)
Round 4: Inc, Sc 2 all around (24)
Round 5: Sc all around (24)
Round 6: Sc in the next 8 st. Sc in
the next st and add a different
colored st marker to the Sc just
made. Sc in the next 2 st. Sc in the
next st and add a different colored
st marker to the Sc just made. Sc in
the next 12 st
Round 7-8: Sc all around (24)
Round 9: Dec, Sc 2 all around (18)
Round 10: *Repeat *2 Dc in the
next stitch, SlSt in the next stitch*
all around (27)
Finish off and leave a long tail for
sewing. Add safety eyes in the
marked areas from Round 6.
Set aside, we will assemble the ice
cream to the cone soon.

Mini Ice Cream Cone:
IN CONE COLOR
Round 1: 6 Sc in Magic Ring (6)
Round 2: Sc all around (6)
Round 3: Inc all around (12)
Round 4-5: Sc all around (12)
Round 6: Inc, Sc all around (18)
Round 7-8: Sc all around (18)
Finish off.

Adding a keychain:
IN MAIN COLOR FOR YARN
You can nd an old keychain and
reuse the metal part if you don’t
have a set of new ones. Take a ~5″
piece of yarn and put it on a needle.
Now insert the needle into the ice
cream as shown and pull out to the
top. Pull the needle
through the keychain and
insert it back into the ice cream.
Tie a rm knot a few times
with the two ends of yarn to secure. Done!

Cone Assembly:
IN MAIN COLOR
Take the tail of the yarn from the
ice cream and insert it into a
needle. Weave that tail of yarn to
the BLO left from Round 10.
Line up the ice cream and cone as
shown, making sure the two tails of
yarn align. Sew them
together, going from the back loop
only from the ice cream to the cone.
Continue this until it’s
almost completely sewed shut.
Stuff here. Continue sewing
closed. Tie a knot with both ends of
yarn and weave them into the cone

Smile:
IN BLACK EMBROIDERY THREAD
Insert needle with thread into the
middle mouth area of the ice cream
and pull needle out around the left
eye as shown. Reinsert
needle into the original middle
insertion spot and pull needle out
around the right eye as shown.
Reinsert needle into the original
insertion spot. Done!

More Amigurumi İce Cream İdeas

Materials

• Yarn: Kartopu BABY COTTON
• Hook: 2.5 mm
• Eyes: 6 mm

Size: 9-11 cm

Abbreviations:
R = row
mc = magic circle
sc = single crochet
inc = 2 sc in the next stitch
dec = single crochet 2 stitches together
(12) = number of stitches you should have at the end of the round/row
(…) *6 = repeat whatever is between the brackets the number of times stated

Head
R 1: 6 sc in mc (6)
R 2: (inc)*6 (12)
R 3: (1 sc, inc)*6 (18)
R 4: (2 sc, inc)*6 (24)
R 5: (3 sc, inc)*6 (30)
R 6: (4 sc, inc)*6 (36)
R 7-12: 36 sc (6 rows)
R 13: (4 sc, dec)*6 (30)
R 14: (3 sc, dec)*6 (24)
R 15: (2 sc, dec)*6 (18)
R 16: (1 sc, dec)*6 (12)

Legs and body (one piece)

Legs (make 2)
R 1: 6 sc in mc (6)
R 2: inc*6 (12)
R 3-6: 12 sc (4 rows)
Don’t cut the yarn when you’ll finish the second leg.

Body
R 7: 11 sc on the 1st leg, 1 inc, 1 inc, 11 sc on the 2nd leg (26)
R 8-10: 26 sc (3 rows)
Change the colour:
R 11-13: 26 sc (3 rows)
R 14: 6 sc, dec, 10 sc, dec, 6 sc (24)
R 15: (2 sc, dec)*6 (18)
R 16: 18 sc
R 17: (1 sc, dec)*6 (12)Crochet bear amigurumi

Arms (make 2)
R 1: 5 sc in mc (5)
R 2: inc*5 (10)
R 3-6: 10 sc (4 rows)
R 7: (1 sc, dec)*3, 1 sc (7)
R 8-10: 7 sc (3 rows)
F.o., leaving a long tail for sewing.

Ears (make 2)
R 1: 6 sc in mc (6)
R 2: inc*6 (12)
R 3-4: 12 sc (2 rows)
F.o., leaving a long tail for sewing.

Muzzle
R 1: 6 sc in mc (6)
R 2: inc*6 (12)
R 3: 12 sc
F.o., leaving a long tail for sewing.

Designed and photos by Bi’kutu Oyuncak
Instagram: @_bikutuoyuncak_

Materials
• Sock weight yarn in light brown for teddy
bear, white for muzzle, Color 1 for hat and
Color 2 for hat band
• Crochet or embroidery thread in dark
brown
• 2.5mm crochet hook
• A pair of 6mm black safety eyes
• Polyfiber fill for stuffing
• Sewing needle
• Keychain with ring

Terminology (US)
magic ring
stitch (st)
single crochet (sc)
half double crochet (hdc)
double crochet (dc)
increase (inc)
decrease (dec)
slip stitch (sl st)
Skill level: Easy

HEAD
Note: The head is worked from the bottom up.
Round 1: With light brown yarn, 6 sc in a magic ring. (6)
Round 2: inc X 6. (12)
Round 3: (sc, inc) X 6. (18)
Round 4: (2 sc, inc) X 6. (24)
Round 5: (3 sc, inc) X 6. (30)
Round 6-11: sc around. (30)
Round 12: (3 sc, dec) X 6. (24)
Round 13: (2 sc, dec) X 6. (18)
Insert 6mm safety eyes between Round 7 & 8, 5 st
apart.
Round 14: (sc, dec) X 6. (12)
Stuff firmly.
Round 15: dec X 6. (6)
Fasten off and sew gap closed.

MUZZLE
Round 1: With white yarn, 6 sc in a magic ring. (6)
Round 2: inc X 6; sl st in the first st to join. (12)
Fasten off, leaving a long tail for sewing.

NOSE & MOUTH
Using crochet/embroidery thread in dark brown, embroider a Y with a short horizontal line below it on the
muzzle [see diagram on next page]. Sew the muzzle
between the eyes between Round 4 & 9 of the head.

EAR [make 2]
Round 1: With light brown yarn, 1 hdc, 4 dc, 1 hdc in a
magic ring.
Pull the tail of the magic ring to close it and form a
semi-circle. Leave a long tail for sewing.

HAT
Round 1-11: With Color 1, follow instructions Head.
Round 12: Join Color 2, ch 1 and hdc around; sl st in
the first st to join. (30)
Fasten off, leaving a long tail for sewing.
Sew ears between Round 9 & 10 of the hat, 8 st apart.

FINISHING
Secure keychain on Round 7 of the hat, just
between the ears. Place hat over the head and
sew it in place.

Designed and photo by Anna Skorohodova
Instagram: @mirrabio
Translated by Amiguroom Toys

Materials:

• Himalaya Dolphin Baby yarn (white) and 4.0 mm crochet hook
• YarnArt Jeans yarn (beige) and 2.5 mm crochet hook
• Pnik embroidery floss for nose
• 5 mm safety eyes
• Sewing needle and scissors
• Pink felt for cheeks
• Thread cord key holder
• Fiberfill

Abbreviations:
R = row
mc = magic circle
ch = chain
sc = single crochet
inc = 2 sc in the next stitch
dec = single crochet 2 stitches together
(12) = number of stitches you should have at the end of the round/row
(…)*6 = repeat whatever is between the brackets the number of times stated

Legs (make 4) – video at 01:35
With beige yarn and 2.5 mm crochet hook:
Leave a long tail.
R 1: 6 sc in mc (6)
R 2-4: 6 sc (3 rows)
F.o. and leave a long tail for sewing.

Ears (make 2) – video at 03:36
With beige yarn and 2.5 mm crochet hook:
Leave a long tail.
Make 4 ch.
R 1: From the 2nd ch from hook: 3 sc
F.o. and leave a long tail for sewing.

Head and body
Start from the muzzle.

Muzzle – video at 04:38
With beige yarn and 2.5 mm crochet hook:
R 1: 6 sc in mc (6)
R 2: (inc)*6 (12)
R 3: (1 sc, inc)*6 (18)
R 4: (2 sc, inc)*6 (24)
R 5-7: 24 sc (3 rows)
With Himalaya Dolphin Baby yarn and 2.5 mm crochet hook (video at 07:02):
R 8: 24 sc
With 4.0 mm crochet hook (video at 07:31):
R 9-14: 24 sc (6 rows)

Insert safety eyes between R 4 and R 5 at the distance of 8 st from each other (view video at 08:35).
Join ears between R 8 and R 9 (view video at 09:43).
Join front legs between R 9 and R 10 (view video at 12:18).
Join hind legs between R 13 and R 14 (13:44).
Embroider muzzle with pink floss (14:38).
Stuff with fiberfill.

R 15: (2 sc, dec)*6 (18)
R 16: (1 sc, dec)*6 (12)
Finish stuffing.
R 17: (dec)*6 (6)
F.o.

You will need:

• Hand knitting threads;
• 1 piece White color rope
• 1 piece Yellow color rope
• 1 piece Mustard Yellow color rope
• Glass bead or amigurumi eye
• Needle and black thread
• 2.5 mm crochet
• Key ring apparatus and crow nose

Fabrication

1) We make a magic ring and make 5 needles in it.
2) We make double stitches on each loop
3) We make 1 single and 1 double needle to the stitches, respectively.
4) We make 2 single and 1 double needle to the stitches respectively.
5) We make 3 single and 1 double needle to the stitches respectively.
6) We make 4 single and 1 double frequent needles to the loops, respectively.
Note: You must have a total of 30 loops in your ring.
We knit another one from the same piece.

We will combine the loops with the inverses inside and make five arms, each of the arms will cover 6 loops in a circle.
7) We knit 6 loops and knit 6 loops that will come across from the other ring. We knit circularly. We have a total of 12 frequent needles.
8) In the second row of the sleeve, we make a single needle to each loop.
9) In every next row, we complete the arm by reducing one loop from one right to the left.

10) 7,8,9. 5 more arms are knitted by repeating the rows.
After knitting the four arms, the fiber is filled and compacted.
11) Fifth lever starts to knit and fiber filling in the same way

You can also design new stars by multiplying the numbers in this example at the same rate as yourself, you can make a pillow or a cute toy.

More Amigurumi Keychain Ideas

If you enjoy making amigurumi, here I share this easy and free amigurumi pattern for you for free. Your kids will love these toys.

Feet (Make 2)
Rnd 1. 6sc in magic ring(6)
Rnd 2. (1sc, 1inc)*3 (9)
Rnd 3. 9sc
Don’t cut the yarn on second leg.

Body
Rnd 4. 9sc on the first leg, 9 sc on the second leg (18)
Rnd 5. – 7. 18sc
Rnd 8. (1sc, 1dec)*6 (12)
Don’t cut the yarn.

Head
Rnd 9. (1sc, 1inc)*6 (18)
Rnd 10. (2sc, 1inc)*6 (24)
Rnd 11. (3sc, 1inc)*6 (30)
Rnd 12. (4sc, 1inc)*6 (36)
Rnd 13. (5sc, 1inc)*6 (42)
Rnd 14. (6sc, 1inc)*6 (48)
Rnd 15. – 22. 48sc
Put safety eyes between 18 row and 19 rows, dictance 4 stitch
Rnd 23. (6sc, 1dec)*6 (42)
Rnd 24. (5sc, 1dec)*6 (36)
Rnd 25. (4sc, 1dec)*6 (30)
Rnd 26. (3sc, 1dec)*6 (24)
Rnd 27. (2sc, 1dec)*6 (18)
Rnd 28. (1sc, 1dec)*6 (12)
Rnd 29. 6dec (6)
Stuff the all part.

Arms (Make 2)
Rnd 1. 6sc in magic ring(6)
Rnd 2. – 3. 6sc

Ears (Make 2)
Make 16 chain and then start second chain
Rnd 1. 6sc, 8hdc, 5dc in 1 stitch, 8hdc, 6sc
Rnd 2. 1chain, return, 33sc, cut the yarn

Dress
Make 21 chain and start second chain
Rnd 1. 4sc, Make 8 sc, skip 2 stitch, 8sc, Make 8 sc, skip 2 stitch, 4sc, cute the yarn
we weave.
Rnd 2. (2dc in 1 stitch)*20 (40)

Crown
Start with yellow yarn
Rnd 1. (1sc,1hdc,3dc,1hdc)*5 in magic ring

Amigurumi Keychain Models

Head
Start with yellow yarn
Rnd 1. 6sc in magic ring (6)
Rnd 2. 6inc (12)
Rnd 3. (1sc, 1inc)*6 (18)
Rnd 4. (2sc, 1inc)*6 (24)
Rnd 5. (3sc, 1inc)*6 (30)
Rnd 6. – 8. 30sc
Rnd 9. (3sc, 1dec)*6 (24)
Rnd 10. (2sc, 1dec)*6 (18)
Rnd 11. (1sc, 1dec)*6 (12)
Rnd 12. 6dec (6)
Stuff and close.

Nose
Start with yellow yarn
Rnd 1. 6sc in magic ring (6)
Rnd 2. 6inc (12)

Ears (Make 2)
Rnd 1. 6sc in magic ring(6)
Rnd 2. 6inc (12)
Rnd 3. (1sc, 1inc)*6 (18)

More Amigurumi Keychain İdeas

If you enjoy making amigurumi, here I share this easy and free amigurumi pattern for you for free. Your kids will love these toys.

İce Cone
Start with light brown yarn
Rnd 1. 6sc in magic ring (6)
Rnd 2. (1sc, 1inc)*3 (9)
Rnd 3. (2sc, 1inc)*3 (12)
Rnd 4. (3sc, 1inc)*3 (15)
Rnd 5. 15sc
Rnd 6. (4sc, 1inc)*3 (18)
Rnd 7. 18sc
Rnd 8. (5sc, 1inc)*3 (21)
Rnd 9. 21sc
Rnd 10. (6sc, 1inc)*3 (24)
Rnd 11. 24sc
Rnd 12. (7sc, 1inc)*3 (27)
Rnd 13. 27sc
Continue with purple yarn
Rnd 14. BLO (2sc, 1inc)*9 (36)
Rnd 15. – 20. 36sc
Rnd 21. (4sc, 1dec)*6 (30)
Rnd 22. (3sc, 1dec)*6 (24)
Rnd 23. (2sc, 1dec)*6 (18)
Rnd 24. (1sc, 1dec)*6 (12)
Rnd 25. 6dec (6)
Stuff and then close.

İce Bottom
Start with purple yarn on FLO rows 14 of ice cone
Rnd 1. (1x and 2 chain in same single crochet)*36

Ice Cream Cream
Start with white yarn
Rnd 1. Into the magic ring 6sc (6)
Rnd 2. 6inc (12)
Rnd 3. (1sc, 1inc)*6 (18)
Rnd 4. Make 4 chain, start second chain, make 3sc, skip 1 sc, 1 slip stitch, Make 5 chain, start second chain, make 4sc, skip 1 sc, 1 slip stitch, Make 4 chain, start second chain, make 3sc, skip 1 sc, 1 slip stitch, Make 6 chain, start second chain, make 5sc, skip 1 sc, 1 slip stitch, Make 5 chain, start second chain, make 4sc, skip 1 sc, 1 slip stitch…

More Amigurumi Keychain İdeas

If you enjoy making amigurumi, here I share this easy and free amigurumi pattern for you for free. Your kids will love these toys.

Foot (Make 2)
Start with blue color yarn
Rnd 1. 6sc in magic ring (6)
Rnd 2. 6inc (12)
Rnd 3–6. 12sc
If you finished the first leg, please cut the yarn. If you finished the second leg, don’t cut the yarn.
We wil make the body on the legs.

Body
Make 2chain on the second leg and then 1 slip stitch on the first leg.
Rnd 7. Make 12 sc on the frist leg, 2sc on the chain, 12sc on the second leg, 2sc on the chain (28)
Rnd 8. 12sc, 2inc, 14sc (30)
Rnd 9–15. 30sc
Rnd 16. (3sc, 1dec)6 (24)
Rnd 17–18. 24sc
Rnd 19. (2sc, 1dec)6 (18)
Rnd 20–21. 18sc

Head
Start with blue color yarn
Rnd 1. 6sc in magic ring (6)
Rnd 2. 6inc (12)
Rnd 3. (1sc, 1inc)*6 (18)
Rnd 4. (2sc, 1inc)*6 (24)
Rnd 5. (3sc, 1inc)*6 (30)
Rnd 6. (4sc, 1inc)*6 (36)
Rnd 7. (5sc, 1inc)*6 (42)
Rnd 8–13. 42sc
Rnd 14. (5sc, 1dec)*6 (36)
Rnd 15. (4sc, 1dec)*6 (30)
Rnd 16. (3sc, 1dec)*6 (24)
Rnd 17. (2sc, 1dec)*6 (18)
Rnd 18. 18sc
Cut the yarn

Mouth
Start with blue color yarn
Rnd 1. 5sc in magic ring (5)
Rnd 2. 5inc (10)
Rnd 3. (1sc, 1inc)*5 (15)
Rnd 4. 15sc

Ears (Make 2)
Start with blue color yarn
Rnd 1. 5sc in magic ring (5)
Rnd 2. 5inc (10)
Rnd 3. (1sc, 1inc)*5 (15)
Rnd 4–6. 15sc
Rnd 7. (3sc, 1dec)*3 (12)
Rnd 8–16. 12sc

Hands (Make 2)
Start with blue color yarn
Rnd 1. 5sc in magic ring (5)
Rnd 2. 5inc (10)
Rnd 3–7. 10sc
Rnd 8. 4sc, 3dec (7)
Rnd 9– 10. 7

More Amigurumi Keychain Ideas: