Materials:
Approx 120 g size 4 yarn in main color (I used I Love this Yarn in Brown)
Small amount of Ivory worsted weight
Embroidery thread for eyebrows
Crochet Hook in Size 3.75
Tapestry Needle
Polyfil
12mm safety eyes
stitch marker

Abbreviations
SC- single crochet
SC INC- single crochet increase (2 SC in each stitch)
INV DEC- Invisible decrease (put hook through the FRONT LOOP ONLY of two consecutive stitches [two loops on hook] Yarn over pull through both loops. [two loops on hook] Yarn over pull through two loops)
Magic Circle- Make a loop, leaving a long tail to work with. Insert hook in center of loop, yarn over and draw up a loop. Yarn over, pull through to make the first chain (this does not count as a stitch!). Continue to crochet over the loop and tail with the number of stitches called for. (If you need 6 SC, then crochet 6 SC inside the ring.) Pull the tail to close the circle.

Amigurumi Monkey Pattern

Face Piece
With Ivory:
Round 1: In a magic circle, 6 SC.
Round 2: SC INC in each around. (12)
Round 3: SC in first, SC INC in next. Repeat around. (18)
Round 4: SC in first 2, SC INC in next. Repeat around. (24)
Round 5: SC in first 3, SC INC in next. Repeat around. (30)
Round 6: SC in first 4, SC INC in next. Repeat around. (36)
Change to Brown
Round 7: SC in each around. Fasten off leaving a long tail to sew on the head.
When you attach it to the head, you will use the long brown tail. It will have a slight hexagonal shape, I lined one point of the hexagon toward the top of the head. Attach the eyes through the face piece between rows 3 and 4, about 3 stitches apart and then through the head around rows 36-37. Embroider the eyebrows about one row above the eyes.

Nose/Mouth
Round 1: In a magic circle, 6 SC.
Round 2: SC INC in each around. (12)
Round 3: SC in first, SC INC in next. Repeat around. (18)
Round 4: SC in first 2, SC INC in next. Repeat around. (24)
Round 5: SC in first 3, SC INC in next. Repeat around. (30)
Round 6: SC in first 4, SC INC in next. Repeat around. (36)
Rounds 7-8: SC in each around. (36)
Slip stitch in the next 3 stitches. Fasten off and leave a long tail to sew on to the face. Get a long piece of brown yarn. Sew the nose on about row 6. When you are ready to attach it, the bottom of the piece will be on row 27 and the top about row 36. Use pins to attach it. Sew it around and lightly stuff it. It will line up with the face piece. It will be attached after the face piece. Stuff as you go!

Body and Head
Round 1: In a magic circle, 6 SC.
Round 2: SC INC in each around. (12)
Round 3: SC in first, SC INC in next. Repeat around. (18)
Round 4: SC in first 2, SC INC in next. Repeat around. (24)
Round 5: SC in first 3, SC INC in next. Repeat around. (30)
Round 6: SC in first 4, SC INC in next. Repeat around. (36)
Round 7: SC in first 5, SC INC in next. Repeat around. (42)
Rounds 8-13: SC in each around. (42)
Round 14: SC in first 5, INV DEC in the next. Repeat around. (36)
Rounds 15-16: SC in each around. (36)
Round 17: SC in first 4, INV DEC in the next. Repeat around. (30)
Rounds 18-19: SC in each around. (30)
Begin stuffing here.
Round 20: SC in first 3, INV DEC in the next. Repeat around. (24)
Rounds 21-22: SC in each around. (24)
Round 23: SC in first 2, INV DEC in the next. Repeat around. (18)
Round 24: SC in the first, INV DEC in the next. Repeat around. (12)
From here we are increasing the head.
Round 25: SC in first, SC INC in next. Repeat around. (18)
Round 26: SC in first 2, SC INC in next. Repeat around. (24)
Round 27: SC in first 3, SC INC in next. Repeat around. (30)
Round 28: SC in first 4, SC INC in next. Repeat around. (36)
Round 29: SC in first 5, SC INC in next. Repeat around. (42)
Round 30: SC in first 6, SC INC in next. Repeat around. (48)
Rounds 31-41: SC in each around. (48)
Attach eyes between rows 37 and 38, about 6 stitches apart. Begin to stuff here. I also stretch the base of the head a little bit so it is more defined, more round than oval. Sew on the nose at this time as well.
Round 42: SC in the first 6, INV DEC in the next. Repeat around. (42)
Round 43: SC in the first 5, INV DEC in the next. Repeat around. (36)
Round 44: SC in the first 4, INV DEC in the next. Repeat around. (30)
Round 45: SC in the first 3, INV DEC in the next. Repeat around. (24)
Round 46: SC in the first 2, INV DEC in the next. Repeat around. (18)
Round 47: SC in the first, INV DEC in the next. Repeat around. (12)
Round 48: INV DEC around. (6)
Fasten off and carefully sew the remaining hole closed.

Stuff the first half of the leg only.
Leg
Using Ivory:
Round 1: 6 SC in a magic ring
Round 2: SC INC in each around. (12)
Round 3: SC in first, SC INC in next. Repeat around. (18)
Round 4: SC in first 2, SC INC in next. Repeat around. (24)
Rounds 5-10: SC in each around. (24)
Round 11: SC in first 2, INV DEC in the next. Repeat around. (18)
Change to Brown
Round 12: SC in each around. (18)
Round 13: SC in the first, INV DEC in the next. Repeat around.(12)
Rounds 14-28: SC in each around. (12)

Stuff the first half of the arm only.
Arm
Using Ivory:
Round 1: 6 SC in a magic ring
Round 2: SC INC in each around. (12)
Round 3: SC in first, SC INC in next. Repeat around. (18)
Rounds 4-7: SC in each around. (18)
Round 8: SC in the first, INV DEC. Repeat around. (12)
Round 9: SC in each around. (12)
Change to Brown
Rounds 10-25: SC in each around. (12)
Fasten off and leave a long tail to sew the arm onto the body. Attach between rows 22 and 23.

Ears (make 2)
Round 1: 6 SC in a magic ring
Round 2: SC INC in each around. (12)
Round 3: SC in first, SC INC in next. Repeat around. (18)
Round 4: SC in first 2, SC INC in next. Repeat around. (24)
Rounds 5-7: SC in each around. (24)
Fasten off and leave a long tail. Flatten the ear. It will have a slight curve. Pin the bottom to row 31 and the top to row 41. Attach it with the long tail.

Tail
Round 1:In a magic ring SC 8.
Rounds 2-30: SC in each around.
Leave a long tail to attach to the body. I attached it centered in the back around row 7.

More Amigurumi Monkey İdeas

Materials:
Approx 100 g size 4 yarn in main color (I used I Love this Yarn in Black)
Small amount white worsted weight
Small amount of yellow worsted weight
Crochet Hook in Size 3.75
Tapestry Needle
Polyfil
12mm safety eyes
stitch marker

Abbreviations
SC- single crochet
SC INC- single crochet increase (2 SC in each stitch)
INV DEC- Invisible decrease (put hook through the FRONT LOOP ONLY of two consecutive stitches [two loops on hook] Yarn over pull through both loops. [two loops on hook] Yarn over pull through two loops)
Magic Circle- Make a loop, leaving a long tail to work with. Insert hook in center of loop, yarn over and draw up a loop. Yarn over, pull through to make the first chain (this does not count as a stitch!). Continue to crochet over the loop and tail with the number of stitches called for. (If you need 6 SC, then crochet 6 SC inside the ring.) Pull the tail to close the circle.

Always move your stitch marker to the last stitch in the round. This pattern is worked in continuous rounds.

Body and Head
Using the black
Round 1: In a magic circle, 6 SC.
Round 2: SC INC in each around. (12)
Round 3: SC in first, SC INC in next. Repeat around. (18)
Round 4: SC in first 2, SC INC in next. Repeat around. (24)
Round 5: SC in first 3, SC INC in next. Repeat around. (30)
Round 6: SC in first 4, SC INC in next. Repeat around. (36)
Rounds 7-11: SC in each around. (36)
Round 12: SC in first 4, INV DEC in the next. Repeat around. (30)
Rounds 13-14: SC in each around. (30)
Begin stuffing here.
Round 15: SC in first 3, INV DEC in the next. Repeat around. (24)
Rounds 16-17: SC in each around. (24)
Round 18: SC in first 2, INV DEC in the next. Repeat around. (18)
Round 19: SC in the first, INV DEC in the next. Repeat around. (12)
From here we are increasing the head. Change to white color. 
Round 20: SC in first, SC INC in next. Repeat around. (18)
Round 21: SC in first 2, SC INC in next. Repeat around. (24)
Round 22: SC in first 3, SC INC in next. Repeat around. (30)
Round 23: SC in first 4, SC INC in next. Repeat around. (36)
Rounds 24-33: SC in each around. (36)
Attach eyes between rows 27 and 28, 8 stitches apart.
Round 34: SC in the first 4, INV DEC in the next. Repeat around. (30)
Round 35: SC in the first 3, INV DEC in the next. Repeat around. (24)
Round 36: SC in the first 2, INV DEC in the next. Repeat around. (18)
Round 37: SC in the first, INV DEC in the next. Repeat around. (12)
Round 38: INV DEC around. (6)
Fasten off and carefully sew the remaining hole closed.

Black Head Piece
Note: It may be helpful to go up one size hook (or even a half size) for this piece. It will sit on the head and it is a very tight fit. I did not, but I did stretch it out before attaching, and I pulled it down to where I wanted it and used pins to keep it in place while I sewed it on. Don’t be intimidated, this is all much easier than it sounds!
Using the black
Round 1: In a magic circle, 6 SC.
Round 2: SC INC in each around. (12)
Round 3: SC in first, SC INC in next. Repeat around. (18)
Round 4: SC in first 2, SC INC in next. Repeat around. (24)
Round 5: SC in first 3, SC INC in next. Repeat around. (30)
Round 6: SC in first 4, SC INC in next. Repeat around. (36)
Rounds 7-13: SC in each around. (36)
Chain 1 and turn.
SC 7 across. Chain 1 and turn. (7)
INV DEC. SC in the next 3. INV DEC. Chain 1 and turn. (5)
INV DEC. SC in the next. INV DEC. (3)
Slip stitch across the new rows and around the entire head piece until you come back to where you started. Fasten off and leave a long tail to sew the black piece onto the white head. Center the dip between the eyes. You may have to stretch it a bit to go over the head, but you want it reasonably tight. Pin it in place and sew it on.

Beak
Using the yellow
Round 1: 6 SC in a magic circle.
Round 2: SC INC in each around. (12)
Round 3: SC in each around. (12)
Fasten off and leave a long tail to sew it on. Flatten the beak and pin it to the face, centered between the eyes, and right beneath the black dip.

Wings (make 2)
Using the black
Round 1: 6 SC in a magic circle
Round 2: SC in each around. (6)
Round 3: INC in each around. (12)
Round 4: SC in each around (12)
Round 5: SC in the first, INC in the next. (18)
Rounds 6-7: SC in each around. (18)
Round 8: SC in the first, INV DEC in the next. Repeat around. (12)
Fasten off and leave a long tail to sew it on. Attach it between rows 17 and 18 on either side.

Feet (make 2)
Using the yellow
Round 1: In a magic circle, 6 SC.
Round 2: SC INC in each around. (12)
Round 3: SC in first, SC INC in next. Repeat around. (18)
Round 4: SC in first 2, SC INC in next. Repeat around. (24)
Slip stitch in the next 3 stitches and fasten off, leaving a long tail to sew it on. Sew the back half of the circle onto the bottom of the penguin. The backs should cover most of the bottom, but the front half should peek out like little feet.

Scarf
Chain 50. In the second chain from hook, HDC. HDC in each chain across. Fasten off and weave in ends.

More Amigurumi Penguin İdeas

Materials:
About 100g I love this Yarn in Gray (or suitable worsted weight substitute)
12mm safety eyes
Stuffing
3.75mm hook
Small amount of white yarn
Needle for sewing
Stitch marker

Abbreviations
SC– single crochet

SC INC– single crochet increase (2 SC in each stitch)

INV DEC– Invisible decrease (put hook through the FRONT LOOP ONLY of two consecutive stitches [two loops on hook] Yarn over pull through both loops. [two loops on hook] Yarn over pull through two loops)

Magic Circle- Make a loop, leaving a long tail to work with. Insert hook in center of loop, yarn over and draw up a loop. Yarn over, pull through to make the first chain (this does not count as a stitch!). Continue to crochet over the loop and tail with the number of stitches called for. (If you need 6 SC, then crochet 6 SC inside the ring.) Pull the tail to close the circle.

Always move your stitch marker to the last stitch in the round. This pattern is worked in continuous rounds.

Crochet Rhino Amigurumi Pattern

Head
Round 1: In a magic circle, 6 SC.
Round 2: SC INC in each around. (12)
Round 3: SC in first, SC INC in next. Repeat around. (18)
Round 4: SC in first 2, SC INC in next. Repeat around. (24)
Round 5: SC in first 3, SC INC in next. Repeat around. (30)
Round 6: SC in first 4, SC INC in next. Repeat around. (36)
Rounds 7-12: SC in each around. (36)
Round 13: SC in first 5, SC INC in next. Repeat around. (42)
Round 14: SC in first 6, SC INC in next. Repeat around. (48)
Round 15-18: SC in each around. (48)
Attach the eyes between rows 12 and 13, 7 stitches apart. Begin to stuff here. Sew on any eyebrows or eyelashes with embroidery thread.
Round 19: SC in the first 6, INV DEC in the next. Repeat around. (42)
Round 20: SC in the first 5, INV DEC in the next. Repeat around. (36)
Round 21: SC in the first 4, INV DEC in the next. Repeat around. (30)
Round 22: SC in the first 3, INV DEC in the next. Repeat around. (24)
Round 23: SC in the first 2, INV DEC in the next. Repeat around. (18)
Round 24: SC in the first, INV DEC in the next. Repeat around. (12)
Round 25: INV DEC around. (6)
Fasten off and carefully sew the remaining hole closed.

Ears (make two)
Round 1: In a magic circle, 6 SC.
Round 2: SC in each around. (6)
Round 3: SC INC in each around. (12)
Round 4: SC in first, SC INC in next. Repeat around. (18)
Rounds 5-6: SC in each around. (18)
Round 7: SC in first, INV DEC in next. Repeat around. (12)
Round 8: INV DEC in each around. (6)
Fasten off leaving a long tail. Sew on between rows 20 and 21, about 8 stitches apart.

Horn
Using the white:
Round 1: In a magic circle, 6 SC.
Round 2: SC in each around.
Round 3: SC in first, SC INC in next. Repeat around.(9)
Round 4-6: SC in each around.
Fasten off, leaving a tail to sew on. Attach to the very front of the nose, about round 3-4.
Small Horn
Round 1: In a magic circle, 6 SC.
Rounds 2-3: SC in each around. (6)
Fasten off. Sew it on directly behind the larger horn.

Body
Round 1: In a magic circle, 6 SC.
Round 2: SC INC in each around. (12)
Round 3: SC in first, SC INC in next. Repeat around. (18)
Round 4: SC in first 2, SC INC in next. Repeat around. (24)
Round 5: SC in first 3, SC INC in next. Repeat around. (30)
Round 6: SC in first 4, SC INC in next. Repeat around. (36)
Round 7: SC in first 5, SC INC in next. Repeat around. (42)
Round 8-20: SC in each around. (42)
Begin to stuff here.
Round 21: SC in the first 5, INV DEC in the next. Repeat around. (36)
Round 22: SC in each around. (36)
Round 23: SC in the first 4, INV DEC in the next. Repeat around. (30)
Round 24: SC in each around. (30)
Round 25: SC in the first 3, INV DEC in the next. Repeat around. (24)
Round 26: SC in the first 2, INV DEC in the next. Repeat around. (18)
Rounds 27-29: SC in each around (18)
Fasten off, leaving a long tail. This is what you will use to sew on the head. Attach the head by pinning it in place. The nose will hang off toward the front, while the back will be mostly attached. Sew around multiple times. Make sure the neck is firmly stuffed before you attach.

Legs (make 2)
Start with white:
Round 1: 6 SC in a magic ring
Round 2: SC INC in each around. (12)
Round 3: SC in first, SC INC in next. Repeat around. (18)
Round 4: In the back loop only, SC in each around. (18)
Round 5: SC in each around. (18)
Change to Gray
Round 6-23: SC in each around. (18)
Round 24: SC in first 2, INV DEC in the next. Repeat around. (12)
Fasten off with a long tail to sew on. Attach the legs so that they lay flat on the ground in a sitting position. The bottom part of the leg will attach around round 7 of the body.

Arms (make 2)
Start with white:
Round 1: 6 SC in a magic ring
Round 2: SC INC in each around. (12)
Round 3: In the back loop only, SC in each around. (12)
Round 4: SC in each around. (12)
Change to gray.
Round 5-21: SC in each around. (12)
Fasten off with a long tail to sew on. The arms angle down slightly, the bottom of the arm around round 20, the top around round 23.

Tail
Chain 12
In the second chain from the hook, HDC. HDC in the remaining chains for a total of 10.
Fasten off. Cut 4 pieces of yarn to attach to the end of the tail. Fold in half and pull through using the hook. Pull the ends through the loop and pull tight. Separate the strands of the yarn for the tail end. Sew it on the backside, centered between the legs.

Head Fuzz
Now you can add the cute little hair fuzz! I cut 2 pieces of yarn about 6 inches long. Using your hook pull the yarn through. Pull the ends through the loop made when you pulled through. Pull tight! I attached them right between the ears. Now separate the strands like you did with the tail. Trim them up to your desired length! (NOTE: This picture is for my Friendly Elephant pattern, but the concept is the same!)

More Amigurumi Rhino İdeas