Materials:
Yarn: white, blue, plus blue novelty
yarn for hat trim and pompom & red
and green for stocking
crochet hook
safety eyes
polyfiber fill
dark brown embroidery floss
darning needle
finished size: 51/2 inches

LEGS (make 2)
Round 1: With white, 6 sc in a magic ring.
Round 2: 2 sc in each st around. (12)
Round 3: (1 sc, 1 inc) around. (18)
Round 4-5: Sc around. (18)
Round 6: (sc2tog) X 4, sc 10. (14)
Round 7: (sc2tog) X 5, sc 4. (9)
Stuff foot lightly.
Round 8-11: Sc around. (9)
Round 12: (2 sc, 1 inc) X3. (12)
Round 13: (1 sc, 1 inc) X 6. (18)
Round 14-15: Sc around. (18)
Round 16: (1 sc, 1 dec) X 6. (12)
Round 17: (sc2tog) X 6. (6)
Break off yarn leaving a long end. Using a
darning needle, thread through all 6 sts. Pull up
tightly and fasten off. Weave in ends.

BODY
Round 1: With white, 6 sc in a magic ring.
Round 2: 2 sc in each st around. (12)
Round 3: (1 sc, 1 inc) around. (18)
Round 4: (2 sc , 1 inc) around. (24)
Round 5: (3 sc, 1 inc) around. (30)
Round 6-7: Sc around. (30)
Round 8: Join blue and sc around. (30)
Round 9: Working in BLO, sc around. (30)
Round 10-12. Sc around. (30)
Round 13: (3 sc, 1 dec) around. (24)
Round 14: Sc around. (24)
Round 15: (2 sc, 1 dec) around. (18)
Round 16: Sc around. (18)
Round 17: (1 sc, 1 dec) around. (12)
Round 18: Sc around. (12)
FO and stuff firmly.
Join blue yarn at Round 9 and sc around on the
front loops. FO and weave in ends.

SHAPE LOWER BODY
Thread a long length
of yarn onto a darning
needle. Push the needle
right through the lower
body from side to side
at the points where the
legs will be attached. Now
leaving a gap of a few
stitches, run the needle
back through the body a
few stitches away from the
starting point. Pull yarn
end to squash the lower
body so that there are depressions on either
side of the body. Repeat this a few times. Pull
both ends of the yarn tightly and tie together
securely. Thread both ends onto the needle
and lose them inside the body. Attach legs.

HEAD
Round 1: With white, 6 sc in a magic ring.
Round 2: 2 sc in each st around. (12)
Round 3: (1 sc, 1 inc) around. (18)
Round 4: (2 sc , 1 inc) around. (24)
Round 5: (3 sc, 1 inc) around. (30)
Round 6: (4 sc, 1 inc) around. (36)
Round 7: (5 sc, 1 inc) around. (42)
Round 8: (6 sc, 1 inc) around. (48)
Round 9-15: Sc around. (48)
If you are using safety eyes, insert eyes
between Round 12 and 13.
Round 16: (6 sc, 1 dec) around. (42)
Round 17: (5 sc, 1 dec) around. (36)
Round 18: (4 sc, 1 dec) around. (30)
Round 19: (3 sc, 1 dec) around. (24)
Round 20: (2 sc, 1 dec) around. (18)
Round 21: (1 sc, 1 dec) around. (12)
FO. Stuff firmly.
Embroider nose and eyebrows.

ARMS (make 2)
Round 1: With white, 6 sc in a magic ring.
Round 2: 2 sc in each st around. (12)
Round 3: (2 sc, 1 inc) X 4. (16)
Round 4: Sc around. (16)
Round 5: (sc2tog) X 6, sc 4. (10)
Round 6: Sc around. (10)
Round 7: Join blue and sc around. (10)
Stuff paws lightly.
Round 8: (1 dec, 3 sc) X 2. (8)
Round 9-14: Sc around.
FO and stuff lightly, leaving upper arm
unstuffed. Sew top opening close and attach to
body.

EARS (make 2)
8 dc in a magic ring. FO.
Attach ears to head and secure head to body

HAT
Round 1: 6 sc in a magic ring.
Round 2-5: Sc around. (6)
Round 6: (1 sc, 1 inc) X 3. (9)
Round 7-9: Sc around.
Round 10: (2 sc, 1 inc) X 3. (12)
Round 11-13: Sc around.
Round 14: (3 sc, 1 inc) X 3. (15)
Round 15-17: Sc around.
Round 18: (4 sc, 1 inc) X 3. (18)
Round 19-21: Sc around.
Round 22: (2 sc, 1 inc) X 6. (24)
Round 23-25: Sc around.
Round 26: (3 sc, 1 inc) X 6. (30)
Round 27-28: Sc around.
Round 29: (4 sc, 1 inc) X 6. (36)
Round 30-31: Sc around.
Round 32: (5 sc, 1 inc) X 6. (42)
Round 33-34: Sc around.
Round 35: (6 sc, 1 inc) X 6. (48)
Round 36-37: Sc around.
Round 38: (7 sc, 1 inc) X 6. (54)
Round 39: Sc around.
Round 40: Change to blue novelty yarn and sc
around.
FO and weave in ends.

STOCKING
Round 1: With pink, 8 sc in a magic ring.
Round 2: Inc around. (16)
Round 3-9: Sc around.
Round 10: Join white, sc 8, ch 1, turn.
Round 11-12: Sc 8, ch 1, turn.
Round 13: Sc 8, (fold the sock so that both
vertical edges of the heel meet; then using pink,
join with a sc), sc 4 along the edge of the heel,
sc 8 across the main body, sc 4 along the edge.
Before working on the next round, sew the gap
in the heel.
Round 14-21: Sc around.
Round 22-23: Join contrasting color and sc
around.
FO. Tack stocking to paws with a few stitches.

POMPOM
Wrap yellow yarn around two fingers several
times. Carefully slide the yarn off your fingers
and tie a piece of yarn around the center in a
knot. With a pair of scissors, cut through the
loops on both sides of the pompom. Take your
scissors and trim the pompom into a round
shape using the scissors. Sew on top of the hat.

More Amigurumi Bear İdeas

Size
About 15 cm (6″) tall, when crocheted with DK weight cotton and linen blend (50g = 112) and a 2,50 mm crochet hook (US size 2/C).

Difficulty
2. Beginner – suitable for novice crocheters, includes small details.

You will need

• Yarn. I used DK weight cotton and linen blend, 50g = 112m (50g = 123yd) / 8 ply / 11 wpi. You will need about 12 g of beige and just a few grams of white yarn.
• 2,25 – 3,50 mm crochet hook (US hook size 2/C – 4/E) or according to the yarn. 
• Polyester fiberfill, wool, wadding etc. for stuffing.
• Cotton embroidery floss. 
• 8 mm safety eyes or buttons, beads, felt etc.
• Yarn needle, scissors, stitch marker.

Abbreviations

• mr, sc n = magic ring – crochet n single crochet stitches into the adjustable loop.
• sl st = slip stitch.
• sc = single crochet stitch (double crochet stitch in UK and Australia). 
• sc n = crochet one sc in each of the next n stitches.
• inc = increase – crochet two single crochet stitches in the same stitch.
• dec = decrease – crochet two stitches together using the invisible decrease method. 
• (sc 4, inc) x n = repeat the pattern between parentheses n times. 
• [36] = number of stitches in a round after finishing round.

Notes

• Work in a continuous spiral, do not join rounds or turn your work, unless instructed otherwise in the pattern.
• Use a stitch marker or a piece of yarn to mark the end or the beginning of a round. Move the marker up after completing each round.
• All stitches are worked into both loops, unless instructed otherwise in the pattern.

Head
Round 1: mr, sc 6 = [6] 
Round 2: inc x 6 = [12] 
Round 3: (sc, inc) x 6 = [18] 
Round 4: (inc, sc 2) x 6 = [24] 
Round 5: (sc 3, inc) x 6 = [30]
Round 6: sc, inc, (sc 4, inc) x 5, sc 3 = [36]
Round 7: (sc 5, inc) x 6 = [42]
Rounds 8-14: sc in each stitch = [42]
Round 15: (sc 5, dec) x 6 = [36]
Attach the safety toy eyes between rounds 12 and 13, leaving 7 stitches (count 6 holes) between them.
Start stuffing the head. Keep adding a bit of fiberfill after every few rounds, stuffing the head firmly.
Round 16: sc, dec, (sc 4, dec) x 5, sc 3 = [30]
Round 17: (sc 3, dec) x 6 = [24]
Round 18: (dec, sc 2) x 6 = [18]
Round 19: (sc, dec) x 6 = [12]
Cut the yarn, leaving a long yarn tail for sewing, and fasten off. Finish stuffing the head.

Muzzle
Round 1: mr, sc 6 = [6] 
Round 2: (inc3 x 2, sc) x 2 = [14] 
Rounds 3-4: sc in each stitch = [14]
Cut the yarn, leaving a long yarn tail for sewing, and fasten off. Sew the muzzle to the head with whip stitch.
Tip! It is difficult to stuff a large open piece. Start pinning the muzzle to the head and add stuffing as you go.

Ears
Round 1: mr, sc 6 = [6] 
Round 2: inc x 6 = [12] 
Rounds 3-4: sc in each stitch = [12]
Cut the yarn, leaving a long yarn tail for sewing, and fasten off. Do not stuff the ears. Flatten the ears and sew them to the head, placing them just below round 3.
Tip! Sew the muzzle and ears to the head and embroider the nose before you sew the head to the body – this way you can fasten all yarn tails securely with a knot under the head.

Body
Round 1: mr, sc 6 = [6] 
Round 2: inc x 6 = [12] 
Round 3: (sc, inc) x 6 = [18] 
Round 4: (inc, sc 2) x 6 = [24] 
Rounds 5-8: sc in each stitch = [24]
Round 9: (dec, sc 10) x 2 = [22]
Round 10: (sc 3, dec) x 4, sc 2 = [18]
Round 11: sc in each stitch = [18]
Round 12: (dec, sc 7) x 2 = [16]
Round 13: (sc 2, dec) x 4 = [12]
Fasten off and hide the yarn tail. Stuff the body firmly. Sew the head to the body using mattress or whip stitch. Add a bit more stuffing before closing the seam.

Arms (make 2)
Round 1: mr, sc 6 = [6] 
Round 2: (inc, sc) x 3 = [9] 
Rounds 3-5: sc in each stitch = [9]
Round 6: sc 3, dec, sc 4 = [8]
Stuff the hands firmly. Keep adding a bit of fiberfill after every few rounds, stuffing the arms lightly about 2/3 way up.
Rounds 7-8: sc in each stitch = [8]
Round 9: sc 3, dec, sc 3 = [7]
Rounds 10-11: sc in each stitch = [7]
Round 12: sc 3, dec, sc 2 = [6]
Round 13: sc in each stitch = [6]
Round 14: sc 3, flatten the top and crochet over the opening.
Cut the yarn, leaving a long yarn tail for sewing, and fasten off. Sew the arms to the sides of the body, one row below the head.

Legs (make 2)
Round 1: mr, sc 6 = [6] 
Round 2: inc x 6 = [12]
Round 3: sc in each stitch = [12]
Round 4: sc 4, dec, sc 6 = [11]
Round 5: sc in each stitch = [11]
Round 6: sc 4, dec, sc 5 = [10]
Stuff the feet firmly. Keep adding a bit of fiberfill after every few rounds, stuffing the legs lightly.
Rounds 7-8: sc in each stitch = [10]
Round 9: sc 4, dec, sc 4 = [9]
Rounds 10-11: sc in each stitch = [9]
Round 12: sc 4, dec, sc 3 = [8]
Rounds 13-16: sc in each stitch = [8]
Left leg
Round 17: sc 3, flatten the top and crochet over the opening.
Right leg
Round 17: sc 5, flatten the top and crochet over the opening.
Cut the yarn, leaving a long yarn tail for sewing, and fasten off. Sew the legs to the body just above round 3 and more towards the front of the body, leaving 4 – 5 stitches (count 3 – 4 holes) between them.
Finish sewing and hide all yarn tails. And done!

More Amigurumi Bear İdeas

Materials

• Yarn: Kartopu BABY COTTON
• Hook: 2.5 mm
• Eyes: 6 mm

Size: 9-11 cm

Abbreviations:
R = row
mc = magic circle
sc = single crochet
inc = 2 sc in the next stitch
dec = single crochet 2 stitches together
(12) = number of stitches you should have at the end of the round/row
(…) *6 = repeat whatever is between the brackets the number of times stated

Head
R 1: 6 sc in mc (6)
R 2: (inc)*6 (12)
R 3: (1 sc, inc)*6 (18)
R 4: (2 sc, inc)*6 (24)
R 5: (3 sc, inc)*6 (30)
R 6: (4 sc, inc)*6 (36)
R 7-12: 36 sc (6 rows)
R 13: (4 sc, dec)*6 (30)
R 14: (3 sc, dec)*6 (24)
R 15: (2 sc, dec)*6 (18)
R 16: (1 sc, dec)*6 (12)

Legs and body (one piece)

Legs (make 2)
R 1: 6 sc in mc (6)
R 2: inc*6 (12)
R 3-6: 12 sc (4 rows)
Don’t cut the yarn when you’ll finish the second leg.

Body
R 7: 11 sc on the 1st leg, 1 inc, 1 inc, 11 sc on the 2nd leg (26)
R 8-10: 26 sc (3 rows)
Change the colour:
R 11-13: 26 sc (3 rows)
R 14: 6 sc, dec, 10 sc, dec, 6 sc (24)
R 15: (2 sc, dec)*6 (18)
R 16: 18 sc
R 17: (1 sc, dec)*6 (12)Crochet bear amigurumi

Arms (make 2)
R 1: 5 sc in mc (5)
R 2: inc*5 (10)
R 3-6: 10 sc (4 rows)
R 7: (1 sc, dec)*3, 1 sc (7)
R 8-10: 7 sc (3 rows)
F.o., leaving a long tail for sewing.

Ears (make 2)
R 1: 6 sc in mc (6)
R 2: inc*6 (12)
R 3-4: 12 sc (2 rows)
F.o., leaving a long tail for sewing.

Muzzle
R 1: 6 sc in mc (6)
R 2: inc*6 (12)
R 3: 12 sc
F.o., leaving a long tail for sewing.

Designed and photos by Bi’kutu Oyuncak
Instagram: @_bikutuoyuncak_

MATERİALS:
yarn: Himalaya Perlina (cream), Gazzal Baby Cotton (yellow), Kartopu Organica (green)
hook size: 2-2,5 mmEyes: 12 mm some fiber

ABBREVIATIONS AND VİDEOS

ch: chain — look
mr: magic
ringle — look
sc: single crochet — look2
sc in the next st (increase)—  look
sc next 2 sts together (decrease)  — look
hdc (half double crochet) — look
ss: slip stitch — look
BLO: Back loop only— look
FLO: Front loop only— look
sc3tog ( single crochet 3 together)(….)* — Repetition

ARMS:
Start with yellow color.
1) magic ring and 6 sc into it (6)
2) 6 inc, (12)
3) (sc, inc)*6 (18) 
4) 3 sc, 2 inc, 7 sc, 2 inc,4 sc (22)
5)10 sc, dec, 11 sc (23)
6-8) sc in each st around (23)Continue with cream color.
9-20) sc in each st around (23) (12 rnds)
21) (21 sc, dec) (22)
22)  sc in each st around (22)
23) (20 sc, dec) (21)
24-25) sc in each st around (21)
26) (19 sc, dec) (20)
27-29) sc in each st around (20)

LEGS:
Start with yellow color.
1) magic ring and 6 sc into it, ss (6)
2) 6 inc, ss (12)
3) (sc, inc)*6, ss (18) 
4) (2 sc, inc)*6, ss (24) 
5) (3 sc, inc)*6, ss (30) 
6-8) sc in each st around, ss (30)Continue with cream color.
9-27) sc in each st around, ss (30) (19 rnds)

This section will be made 2 pieces. Break the rope of the first piece, do not break the rope of the second piece. 
Now we will unite. 2 chains are made between two legs.

28-31) sc in each st around, ss (64)
32) 15 sc, 2 inc,30 sc, 2 inc, 15 sc,ss (68) – (increases will come to the sides.)
33-37) sc in each st around, ss (68)

BODY:
38) sc BLO in each st around,ss (68)
39) 16 sc, dec, 32 sc, dec, 16 sc (66) – (continue in spiral form)
40) sc in each st around (66)
41) 15 sc, dec, 31 sc, dec, 16 sc (64)
42) sc in each st around (64)
43) 15 sc, dec, 30 sc, dec, 15 sc (62)
44) sc in each st around (62)
45) 14 sc, dec, 29 sc, dec, 15 sc (60)
46) sc in each st around (60)
47) (13 sc, dec)*4 (56)
48-49) sc in each st around (56)
50) (12 sc, dec)*4 (52)
51) sc in each st around (52)
52) (11 sc, dec)*4 (48)
53) sc in each st around (48)
54) (10 sc, dec)*4 (44)
55) sc in each st around (44)
56) (9 sc, dec)*4 (40)
Continue adding the arms.
57) 7 sc, 6 sc together with arm,14 sc, 6 sc together with arm, 7 sc (40)
58) 7 sc, [(dec, 2 sc)*3, dec] in the arm, 14 sc, [(dec, 2 sc)*3, dec] in the arm,7 sc (48)
59) 7 sc, [dec, 2 sc, sc3tog, dec] in the arm, 14 sc, [dec, sc, sc3tog, 2 sc, dec] in the arm,7 sc (40)
60) sc in each st around (40)
Cut yarn leaving long yarn tail for sewing.

SKİRT:
start from 38th row with green yarn
1) FLO (sc. inc)*34, ss(102)
2) 2 ch, (dc, incdc)*51, ss (153)
3) 2 ch, (5 dc, incdc)*25, 3 dc, ss (178)

HEAD:
Start with cream color.
1) magic ring and 6 sc into it (6)
2) 6 inc (12)
3) (sc, inc)*6  (18) 
4) (2 sc, inc)*6 (24) 
5) (3 sc, inc)*6 (30) 
6) (4 sc, inc)*6 (36) 
7) (5 sc, inc)*6 (42) 
8) (6 sc, inc)*6 (48) 
9) (7 sc, inc)*6 (54) 
10) (8 sc, inc)*6 (60) 
11) (9 sc, inc)*6 (66) 
12) (10 sc, inc)*6 (72) 
13) (11 sc, inc)*6 (78) 
14) (12 sc, inc)*6 (84) 
15) (13 sc, inc)*6 (90) 
16-30) sc in each st around (90) (15 rnds)
31) (13 sc, dec)*6 (84) 
32) (12 sc, dec)*6 (78) 
33) (11 sc, dec)*6 (72)
34) (10 sc, dec)*6 (66) 
35) (9 sc, dec)*6 (60) 
36) (8 sc, dec)*6 (54)  
37) (7 sc, dec)*6 (48) 
38) (6 sc, dec)*6 (42) 
Place eyes between round 22 and 23 leaving 15 sts between them

EARS:
Start with cream color.
1) magic ring and 6 sc into it (6)
2) 6 inc, (12)
3) (sc, inc)*6 (18) 
4) (2sc, inc)*6 (24) 
5) (3sc, inc)*6 (30)
6-8) sc in each st around (30)
9) double the ear, 15 sc, ss (15)
Cut yarn leaving long yarn tail for sewing.

NOSE: 
Start with cream color.
1) magic ring and 6 sc into it (6)
2) 6 inc, (12)
3) (sc, inc)*6 (18) 
4) (2sc, inc)*6 (24) 
5) (3sc, inc)*6 (30)
6) (4sc, inc)*6 (36)
7) sc in each st around (36)
Cut yarn leaving long yarn tail for sewing.

RİBBON:
Start with yellow color.
1) 41 chains, starting from the second chain stitch crochet around the chain like: 40 sc, return (40)
2-8) ch, 40 sc, return (40)
9) 40 ss 
fold it in half and stitch it in.Wrap the thread in the middle

More Amigurumi Bear Ideas:

Materials:

• Yarn(s) – Off-White, Light Blue and Light Yellow 8ply Acrylic Yarn. 
• Crochet Hook – Size 3.0mm
• Yarn Needle
• Tapestry Needle 
• Light blue tapestry thread.
• Fiberfill 
• 1 pair of 8mm Safety Eyes.
• Small piece of White Felt.
• Fabric Glue.
• Stitch Marker or Safety Pin

Note: This pattern works in continuous rounds (instead of joined rounds).

Abbreviation:

– MR – Magic Ring
– sc – Single Crochet
– 2 sc in next sc – Increase 
– dec 1 – Decrease
– Ch – Chain
– Sl St – Slip Stitch
– * * – Repeat Step
– F/O – Fasten Off

Head: 

Off-White Yarn.
Rnd 1: MR, sc 6 in MR. (6)
Rnd 2: 2 sc in each sc around. (12)
Rnd 3: *sc 1, 2 sc in next sc*, repeat around. (18)
Rnd 4: *sc 2, 2 sc in next sc*, repeat around. (24)
Rnd 5: *sc 3, 2 sc in next sc*, repeat around. (30)
Rnd 6: *2 sc in next sc, sc 4*, repeat around. (36)
Rnd 7: *2 sc in next sc, sc 5*, repeat around. (42)
Rnd 8-15: sc around. (42)
Rnd 16: *dec 1, sc 5*, repeat around. (36)
Rnd 17: *dec 1, sc 4*, repeat around. (30)
Rnd 18: *dec 1, sc 3*, repeat around. (24)
Start stuffing with fiberfill. 
Rnd 19: *dec 1, sc 2*, repeat around. (18)
Rnd 20: *dec 1, sc 1*, repeat around. (12)
Rnd 21: *dec 1*, repeat around. (6)
Add on fiberfill to stuff the entire head. 
F/O and leave a long end for sewing to Body. 

Body:

Light Blue Yarn. 
Rnd 1-5: Same as Head pattern (refer to top).
Rnd 6-8: sc around. (30)
Rnd 9: *sc 4, 2 sc in next sc*, repeat around. (36)
Rnd 10-12: sc around. (36)
Rnd 13: *sc 4, dec 1*, repeat around. (30)
Rnd 14: sc around. (30)
Rnd 15: *sc 3, dec 1*, repeat around. (24)
Start stuffing with fiberfill.
Rnd 16: *sc 2, dec 1*, repeat around. (18)
Rnd 17: *sc 1, dec 1*, repeat around. (12)
Rnd 18: *dec 1*, repeat around. (6)
Add on fiberfill to stuff the entire body.
F/O and leave a long end for sewing to Head.

Arms: (make 2) per bear

Off-White and Light Blue Yarn.
Starting with white,
Rnd 1: MR, sc 6 in MR. (6)
Rnd 2: *sc 1, 2 sc in next sc*, repeat around. (9)
Rnd 3: sc around. (9)
Change color to light blue.
Rnd 4: sc around. (9)
Rnd 5: *dec 1, sc 1*, repeat around. (6)
Rnd 6-8: sc around. (6)
Stuff fiberfill.
F/O and leave long end for sewing to Body. 

Legs: (make 2) per bear

Off-White Yarn.
Rnd 1: MR, sc 6 in MR. (6)
Rnd 2: 2 sc in each sc around. (12)
Rnd 3: sc 1, *sc 1, 2 sc in next sc* repeat 4 times, sc 3. (16)
Rnd 4-5: sc around. (16)
Rnd 6: *sc 1, dec 1* repeat around. (11)
Stuff legs with fiberfill.
F/O and leave long end for sewing to Body.

Ears: (make 2) per bear

Off-White Yarn.Follow Legs Patten exactly.
F/O and leave long end for sewing to head.
Flatten the circle. Do not stuff.

Pacifier:

Light Yellow Yarn.i)
Rnd 1: MR, sc 6 in MR. (6)
Rnd 2: *sc 1, 2 sc in next sc*, repeat around. (9)
Sl St in the next stitch. F/O and tie a knot.ii)
Ch 5. Use this ch and slot it into MR-hole.Tie a knot to secure both end of the chains together.

Milk Bottle:

Light Yellow and Light Blue Yarn. 
Starting with light yellow,
Rnd 1: MR, sc 6 in MR. (6)
Rnd 2: 2 sc in each sc around. (12)
Rnd 3-8: sc around. (12)
Rnd 9: *dec 1, sc 1*, repeat around. (9)
Change color to light blue. 
Rnd 10: *sc 1, 2 sc in next sc*, repeat around. (12)
Rnd 11-12: sc around. (12)
Start stuffing with fiberfill.Change color to light yellow.
Rnd 13: *dec 1, sc 1*, repeat around. (9)
Add on fiberfill to milk bottle.
Rnd 14: *dec 1*, repeat around. (6)
F/O, leave a long end and close up the hole.Continue using the long end to sew onto the blue part stitching from Rnd 12 to 10 of the milk bottle in down and up motion. The sewing will keep the bottle in shape.

Assembling: (Refer to picture)

– Sew the ears to top of the head. (Placement of ears: 5 sc from center of head)
– Using fabric glue, attach safety eyes onto face. 
– Using white felt, cut out an oval and use light blue tapestry thread to embriodery the bear’s nose. Fabric glue white felt onto the face.
– Fabric glue pacifier onto the mouth area.
– Sew the body to the head.
– Sew the arms on each side of body.
– Sew the legs to the body.
– Lastly, sew on the milk bottle on either side of the arm (whichever you prefer).

More Amigurumi Bear Ideas:

Legend:

Ch – air loop

MR – amigurumi ring

İnc – increase

Dec – decrease

Sc – single crochet

Hdc double crochet

Dc double crochet

Materials

The bear is knitted of Alize Angora Real 40 yarn (wool 40%, acrylic 60%)

B 100gr-480m

Hook 1.25.

The bear is knitted in one piece from the feet to the crown.

It is imperative to use a frame so that the toy holds

shape, and most importantly the head because the bear’s neck is very thin.

LEGS-BODY

We start knitting from the feet. The marker runs strictly behind the leg.

Left leg

9 Ch

We start knitting in the second loop of the chain.

1p-7Sc., 3Sc in one loop, on the other side of the chain 6Sc., İnc = 18p

2p-İnc., 6Sc., İnc.х3,6Sc., İnc.х2 = 24p

3p-1Sc., İnc., 6Hdc., (1Sc., İnc) x3.6Hdc., (1Sc., İnc) x2 = 30p

4p-İnc., 4Hdc., 8Dc., İnc.Dcх3., 8Dc., 4Hdc., İncх2 = 36p

5p-7p -36Sc (3 rows)

8p- (4Sc., Dec) x6 = 30p

9p-30Sc

10p- (3Sc., Dec) x6 = 24p + 1 offset loop

11p-3Sc., (1Sc., Dec) x6., 3Sc., = 18p

Start stuffing your foot. Do not stuff the sock too much, there will be tightening

for fingers.

Now cut off a piece of wire (I have 35cm), make a loop, insert it into

tap the foot and around the wire with padding.

12p-3Sc., Dec.x6., 3Sc., = 12p

13r-17r-12Sc (5 rows)

18p-10Sc, 2Sc leave, do not tie to the end of the row.

When we connect with the right leg, then these two loops will be the first loops.

We tear off the thread. Fill.

Right leg

9 Ch

We start knitting in the second loop of the chain.

1p-7Sc., 3Sc in one loop, on the other side of the chain 6Sc., İnc. = 18p

2p-İnc., 6Sc., İnc.х3,6Sc., İnc.х2 = 24p

3p-1Sc., İnc., 6Hdc., (1Sc., İnc) x3.6Hdc., (1Sc., İnc) x2 = 30p

4p-İnc., 4Hdc., 8Dc., İnc.Dcх3., 8Dc., 4Hdc., İncх2 = 36p

5p-7p -36Sc (3 rows)

8p- (4Sc., Dec) x6 = 30p

9p-30Sc

10p- (3Sc., Dec) x6 = 24p + 1 offset loop

11p-3Sc., (1Sc., Dec) x6., 3Sc., = 18p

Start stuffing your foot. Do not stuff the sock too much, there will be tightening for fingers.

Now cut off a piece of wire (I have 35cm), make a loop, insert it into tap the foot and around the wire with padding.

12p-3Sc., Dec.x6., 3Sc., = 12p

13p-18p-12Sc (6 rows) we make 2 offset loops Fill.

We do not tear off the thread, we continue knitting.

Next, we will connect the legs together and into the body.

Body.

19p-3Sc on the right leg, 6 Ch, now take the left leg and start

 knitting from the remaining untied stitches 12Sc. on the left leg,

 6Sc. after Ch., 9Sc. on the right leg.

20p- 3Sc., 6Sc. on Ch., 3Sc., (İnc., 1Sc) х3., 12Sc.- (3Sc on the left

 leg + 6Sc along the chain from Ch., + 3Sc. on the right leg = 12Sc).,

 (1Sc., İnc.) X3 = 42p

After row 20, the thread should be in the center of the right leg, behind.

About the wire.

Twist two wires from the legs together, but twist only the length of the body plus the neck, in the head two wires should be separate.

21r-22r-42Sc (2 rows)

23р-4Sc., İnch6., (İncavki for priests), 12Sc., (İnc., 1Sc) x6., (Increments for

 tummy), 8Sc. = 54p

24p-26r-54Sc. (3rd row)

27p- (8Sc., İnc) x6 = 60p

28p-60Sc

29p-5Sc., İnc., (9Sc., İnc) х5,4Sc. = 66p

30r-37r-66Sc (8 rows)

38p-40Sc., (Dec., 1Sc) x6., 8Sc. = 60p decreases in the middle of the tummy

39p-60Sc

40p-35Sc., (Dec., 1Sc) x6., 7Sc. = 54p decreases in the middle of the tummy

41r-43r-54Sc (3 rows)

44p- (3Sc., Dec) x6., 24Sc. = 48p

We begin to stuff the body and then, as the body knits, continue stuffing.

45r-46r- 48Sc.

47p- (6Sc., Dec.) X6 = 42p

48p-42Sc.

49p- (5Sc., Dec) x6 = 36p

50p-36Sc.

51p- (4Sc., Dec) x6 = 30p

52p-30Sc.

53p- (3Sc., Dec) x6 = 24p

54p- (2Sc., Dec) x6 = 18p

55p-18Sc fill to the end

Neck.

56p-Dec.x9 = 9p

57r-58r-9Sc. (2 rows)

Let’s move on to knitting the head.

Head.

59p-İncx9 = 18p.

60p- (2Sc., İnc) x6 = 24p.

61p- (3Sc., İnc) x6 = 30p.

62p- (4Sc., İnc) x6 = 36p.

63p- (5Sc., İnc) x6 = 42p.

64p- (6Sc., İnc) x6 = 48p.

65p- (7Sc., İnc) x6 = 54p.

66p- (8Sc., İnc) x6 = 60p.

67p- (9Sc., İnc) x6 = 66p.

68p- (10Sc., İnc) x6 = 72p.

69p- (11Sc., İnc) x6 = 78p.

70p- (12Sc., İnc) x6 = 84p.

71r-78r-84Sc. (8 rows)

Make such a structure from wire as in the photo, this is for stability

bear heads. The head is large on a thin neck. Will help the same

bend the head to the sides.

From this point on, you can gradually and carefully fill your head.

The wire should not touch the head, but be inside it. And around

wire packing.

It is better to start stuffing in small lumps, so that gradually

fill the entire head space.

79p-6Sc., Dec., (12Sc., Dec) x5., 6Sc = 78p.

80p-78Sc.

81p- (11Sc., Dec) x6 = 72p.

82p-72Sc.

83р-5Sc., Dec., (10Sc., Dec) х5., 5Sc = 66p.

84p-66Sc.

85p- (9Sc., Dec) x6 = 60p.

86p-60Sc.

87p-4Sc., Dec., (8Sc., Dec) x5., 4Sc = 54p.

88p-54Sc.

89p- (7Sc., Dec) x6 = 48p.

90p-48Sc.

91p-3Sc., Dec., (6Sc., Dec) x5., 3Sc = 42p.

92p-42Sc.

93p- (5Sc., Dec) x6 = 36p.

94p-2Sc., Dec., (4Sc., Dec) x5., 2Sc = 30p.

95p- (3Sc., Dec) x6 = 24p.

96р-1Sc., Dec., (2Sc., Dec) х5., 1Sc = 18p.

97p- (1Sc., Dec) x6 = 12p to fill

98p-Decx6.

Hands. (2 parts)

1p-6Sc. in MR

2p-İnc.x6 = 12p

3p- (1Sc, İnc.) X6 = 18p

4p- (2Sc, İnc.) X6 = 24p

5p-8p-24Sc. (4 rows)

9p- (2Sc., Dec) x6 = 18p

10p-11p- 18Sc. (2 rows)

12p- (1Sc., Dec) x6 = 12p Fill the palm, but very weakly, so that later you can

was on it to pull your fingers.

13p-30p- 12Sc (18 rows)

Now you need to cut off a piece of wire so that it sticks out of the handle by 1.5-2 cm longer, but insert the wire only after tightening your fingers.

Flatten the palm and embroider two stitches for the fingers, slightly tightening. Fill the handle a little.

Muzzle.

(from finishing yarn)

3 Ch

We knit in rotary rows, at the end of each row we make Ch

We start with the second loop of the chain

1p-İnc.x2 = 4Sc Ch turn

2p-İnc., 2Sc., İnc. = 6Sc Ch turn

3p-İnc., 4Sc., İnc. = 8Sc Ch turn

4p-İnc., 6Sc., İnc. = 10Sc Ch turn

5p-İnc., 8Sc., İnc. = 12Sc Ch turn

6p-İnc., 10Sc., İnc. = 14Sc Ch turn

7p-16p- 14Sc (10 rows) Ch turn

17p-Dec., 10Sc., Dec. = 12Sc Ch turn

18p-Dec., 8Sc., Dec. = 10Sc Ch turn

19p-Dec., 6Sc., Dec. = 8Sc Ch turn

20p-Dec., 4Sc., Dec. = 6Sc Ch turn

21p-Dec., 2Sc., Dec. = 4Sc Ch turn

22p-Dec.x2 = 2Sc without turning,

tie the entire muzzle around the perimeter with 2 rows of Sc.

Ears. (2 parts)

1p-6Sc. in MR

2p-İnc.x6 = 12p

3p- (1Sc, İnc.) X6 = 18p

4p- (2Sc, İnc.) X6 = 24p

5p- (3Sc, İnc.) X6 = 30p

6p-9p-30Sc. (4 rows)

Fold the ear in half and tie the bottom edge in two layers with 15Sc.

Inner eyelet.

(from finishing yarn) 2 parts.

9 Ch

Knit in pivoting rows, at the end of the row do Ch

We start knitting from the second loop of the chain.

1p-3p-8Sc., (3 rows) Ch turn

4p-Dec., 4Sc., Dec. = 6Sc Ch turn

5p-Dec., 2Sc., Dec. = 4Sc thread break

Sew the eyelet neatly into the main ear.

The inner eyelet can be cut out of fabric.

Belly pad.

(from finishing yarn) 1 piece.

1p-6Sc. in MR

2p-İnc.x6 = 12p

3p- (1Sc, İnc.) X6 = 18p

4p- (2Sc, İnc.) X6 = 24p

5p- (3Sc, İnc.) X6 = 30p

6p- (4Sc, İnc.) X6 = 36p

Break the thread.

Assembly.

Before starting the assembly, you need to comb all the parts. Can Velcro, you can use a slicker.

Comb very carefully so as not to change the shape of the parts.

Colored pins can be inserted in the center of the tummy and in the center of the head, so that when assembling, you orient yourself and arrange the bear symmetrically.

You can immediately sew the patch on the tummy, this will also help to determine with the center of the bear shape.

Sew on the muzzle, be sure to add filler, but not much to the muzzle did not stick out forward, but, as it were, protruded slightly forward. It located not in the center of the head, but much downward. Somewhere from row 65 (or through 6 rows from the neck) and up.

Sew on the ears. The bear’s head is not round, and you can see how there are places for ears.

Make a small eye tighten. To do this, insert the needle behind the head at neck and withdraw into the first eye, tighten a little, return, then from the neck withdraw into the second eye and back to the neck. Tighten slightly and fasten the thread.

And because our eyes will be located very close to each other, then we can with one stitch to capture the entire area intended for the eyes, and slightly pull, do not pull strongly, otherwise they may look like they have failed.

This option will deepen the eyes evenly.

Choose the nose and eyes at your discretion. But it is better that the nose is not small, I have a length of 2.5 cm If there is no nozzle suitable for the size, it is easy to make it out of plastic or dump it, but you can find a button and cover it with a cloth. There are many options.

Place the eyes just above the muzzle and very close to each other.

Stick the handles with a protruding wire into the body on the sides in the region of 49-50 rows,

sew on. Make sure your arms are symmetrical.

Sew on the tummy on the most convex part of the belly, a drop add filler.

Embroider a smile and eyebrows. Embroider a smile in one thread so that it is so not very noticeable, but the eyebrows are better in two strings. Embroider the same fingers and toes.

You can tint the bear a little – cheeks, eyebrows.

Cut several threads from the main yarn and string them on the crown heads (where we closed the last loops) as we string the fringe.

Cut to desired length and fluff. It will be a forelock.

The bear can be made with a felted muzzle and a felted nose. Eyes made of plastic. Sew on patches.

The bear is ready. And you can decorate it as you wish.

Desinger : https://www.lilleliis.com/

Materials:

• DK (8ply) weight Albin Promotion Alpaka (100% alpaca wool; 50 g/110 m) – 2 colors
• some cotton yarn for the muzzle and nose – for example Steinbach Wolle Capri (100% cotton; 50 g/125 m)
• crochet hook 3  mm
• polyester fiberfill
• safety eyes (Ø 6mm)
• some thread for stitching the eyebrows
• darning and embroidery needles

Abbreviations:
sc – single crochet, st(s) – stitch(es), rep – repeat

• WORK IN CONTINUOUS ROUNDS. DO NOT JOIN OR TURN UNLESS OTHERWISE INSTRUCTED.
• IT WOULD BE WISE TO USE A STITCH MARKER AND PLACE IT IN THE FIRST STITCH OF EACH ROUND TO MARK THE BEGINNING OF IT.
• LEAVE EACH PIECE A LONG TAIL FOR SEWING.

HEAD

Main color. Crocheted from top to bottom.

1: Start 6 sc in a magic ring [6]

2: Work 2 sc in each st around [12]

3: (Sc in next st, 2 sc in next st) rep 6 times [18]

4: (Sc in each of next 2 sts, 2 sc in next st) rep 6 times [24]

5: (Sc in each of next 3 sts, 2 sc in next st) rep 6 times [30]

6: (Sc in each of next 4 sts, 2 sc in next st) rep 6 times [36]

7: (Sc in each of next 5 sts, 2 sc in next st) rep 6 times [42]

8-17: Sc in each st around

Fasten safety eyes between rounds 13. and 14. Insert the first eye between them, then count 9 holes to the left and insert the second eye in the next hole. Close the washers from the inside of the piece.

18: (Sc in each of next 5 sts, sc2tog) rep 6 times [36]

19: (Sc in each of next 4 sts, sc2tog) rep 6 times [30]

20: (Sc in each of next 3 sts, sc2tog) rep 6 times [24]

21: (Sc in each of next 2 sts, sc2tog) rep 6 times [18]

Fill the head with fiberfill.

EAR (make 2)

Contrasting color.

1: Start 6 sc in a magic ring [6]

2: Work 2 sc in each st around [12]

3-4: Sc in each st around

Leave a yarn tail for sewing.

MUZZLE

Use cotton yarn.

1: Start 6 sc in a magic ring [6]

2: Work 2 sc in each st around [12]

3: (Sc in next st, 2 sc in next st) rep 6 times [18]

4: Sc in each st around

Leave a yarn tail for sewing.

NOSE

Use cotton yarn.

1: Start 6 sc in a magic ring [6]. Sl st in the first sc.

Leave a yarn tail for sewing.

BODY

Main color. Crocheted from the bottom up.

1: Start 6 sc in a magic ring [6]

2: Work 2 sc in each st around [12]

3: (Sc in next st, 2 sc in next st) rep 6 times [18]

4: (Sc in each of next 2 sts, 2 sc in next st) rep 6 times [24]

5: (Sc in each of next 3 sts, 2 sc in next st) rep 6 times [30]

6: (Sc in each of next 4 sts, 2 sc in next st) rep 6 times [36]

7: (Sc in each of next 5 sts, 2 sc in next st) rep 6 times [42]

8-11: Sc in each st around

12: (Sc in each of next 5 sts, sc2tog) rep 6 times [36]

13: Sc in each st around

14: (Sc in each of next 4 sts, sc2tog) rep 6 times [30]

15-16: Sc in each st around

17: (Sc in each of next 3 sts, sc2tog) rep 6 times [24]

18-19: Sc in each st around

20: (Sc in each of next 2 sts, sc2tog) rep 6 times [18]

Leave a yarn tail for sewing. Fill the body with fiberfill.

ARM (make 2)

Start with contrasting color.

1: Start 6 sc in a magic ring [6]

2: Work 2 sc in each st around [12]

3: Sc in each st around

Continue with the main color.

4-6: Sc in each st around

Fill the tip of the arm. Add some stuffing as the work progresses.

7: (Sc in each of next 2 sts, sc2tog) rep 3 times [9]

8-9: Sc in each st around

10: (Sc in the next st, sc2tog) rep 3 times [6]

11: Sc in each st around

Leave a yarn tail for sewing.

LEG (make 2)

Start with contrasting color.

1: Start 6 sc in a magic ring [6]

2: Work 2 sc in each st around [12]

3: (Sc in next st, 2 sc in next st) rep 6 times [18]

4: Sc in each st around

Continue with the main color.

5-6: Sc in each st around

7: (Sc in the next st, sc2tog) rep 6 times [12]

Fill the tip of the arm. Add some stuffing as the work progresses.

8: Sc in each st around

9: (Sc in each of next 2 sts, sc2tog) rep 3 times [9]

Leave a yarn tail for sewing.

Assembling the pieces
Start with the head – attach the ears and muzzle. Sew the nose onto the muzzle. Stitch the eyebrows. Sew the head together with the body. Attach the arms and legs.

SCARF

I made a scarf for my little bear using some furry leftover yarn. First I made a long chain, just as long as I wanted the finished scarf to be. Then started single crochet back to the beginning. Weave in the yarn ends and it`s done!

Desinger : https://talesoftwistedfibers.wordpress.com/
This is an original pattern by Tales of Twisted Fibers

MATERIALS
yarn: light brown, dark brown,
blue, yellow plus red and green for
stocking
crochet hook
knitting needles
safety eyes
polyfiber fill
dark brown embroidery floss
darning needle
finished size: 8 inches

LEGS (make 2)
Round 1: With white, 6 sc in a magic ring.
Round 2: 2 sc in each st around. (12)
Round 3: (1 sc, 1 inc) around. (18)
Round 4-5: Sc around. (18)
Round 6: (sc2tog) X 4, sc 10. (14)
Round 7: (sc2tog) X 5, sc 4. (9)
Stuff foot.
Round 8-11: Sc around. (9)
Round 12: (2 sc, 1 inc) X3. (12)
Round 13: (1 sc, 1 inc) X 6. (18)
Round 14-15: Sc around. (18)
Stuff leg.

JOIN LEGS
Round 17: Hold both legs together, legs facing
away from you. Beginning at center back, sc 16,
(inc 1) X 4, sc 16. (40)

BODY
Round 18-21: Sc around. (40)
Round 22: Change to dark brown and sc
around.
Round 23: Sc around in BLO.
Round 24: (Sc 6, 1 dec) X 5. (35)
Round 25: Sc around.
Round 26: (Sc 5, 1 dec) X 5. (30)
Round 27: Sc around.
Round 28: (Sc 4, 1 dec) X 5. (25)
Round 29: Sc around.
Round 30: (Sc 3, 1 dec) X 5. (20)
Round 31-32: Sc around.
Round 33: (Sc 2, 1 dec) X 5. (15)
Round 34-35: Sc around.
FO and stuff firmly.
Join dark brown at Round 23 and sc around.

HEAD
Round 1: With light brown, 6 sc in a magic ring.
Round 2: 2 sc in each st around. (12)
Round 3: (1 sc, 1 inc) around. (18)
Round 4: (2 sc , 1 inc) around. (24)
Round 5: (3 sc, 1 inc) around. (30)
Round 6: (4 sc, 1 inc) around. (36)
Round 7: (5 sc, 1 inc) around. (42)
Round 8: (6 sc, 1 inc) around. (48)
Round 9: (7 sc, 1 inc) around. (54)
Round 10-16: Sc around.
Round 17: (7 sc, 1 dec) around. (48)
Round 18: (6 sc, 1 dec) around. (42)
Round 19: (5 sc, 1 dec) around. (36)
Round 20: (4 sc, 1 dec) around. (30)
Round 21: (3 sc, 1 dec) around. (24)
Round 22: (2 sc, 1 dec) around. (18)
Round 23: (4 sc, 1 dec) X 3. (15)
FO and stuff firmly.
If you are using safety eyes, insert eyes
between Round 13 and 14.
Embroider nose and eyebrows.

EARS (make 2)
Round 1: With light brown, ch 2, 3 sc in 2nd ch
from the hook.
Round 2: Ch 1, turn, 2 sc in each of the 3 sts. (6)
Round 3: Ch 1, turn, sc in 1st st, 2 sc in next st,
(sc 1, inc 1) X 2. (9)
Round 4: Ch 1, turn, sc in 1st 2 sts, 2 sc in next
st, (sc 2, inc 1) X 2. (12)
Round 5: Ch 1, turn, sc in 1st 3 sts, 2 sc in next
st, (sc 3, inc 1) X 2. (15)

ARMS (make 2)
Round 1: With light brown, 6 sc in magic ring.
Round 2: 2 sc in each st around. (12)
Round 3: (1 sc, 1 inc) around. (18)
Round 4: Sc around. (18)
In the next round, we will shape thumb with
a bauble stitch. If you are unfamiliar with this
stitch, a how-to is included in the next page.
Round 5: (1 sc, 1 dec) X 3, bauble st in the next
st, 1 dec, (1 sc, 1 dec)X2. (12)
Round 6: Sc around. (12)
Round 7: (2 sc, 1 dec) X 3. (9)
Round 8: Sc around. (9)
Start stuffing the arm.
Round 9: Sc around. (9)
Round 10: Join dark brown and sc around. (9)
Round 11. Sc in BLO. (9)
Round 12-22: Sc around.
FO, stuff and sew top opening close.
Join dark brown yarn at Round 11 and sc
around for two rounds. FO and sew to body.

HAT
The hat will be knitted in the flat and later
joined at the seams.
Cast on 50 sts with blue.
Row 1-3: K1, P1.
Row 4-7: Starting with a purl row, working in
stocking stitch till Row 7.
Row 8: P12, cast off 8, P10, cast off 8, P12.
Row 9: K12, cast on 8, K10, cast on 8, K12.
Row 10-20: Continue working in stocking stitch.
Row 21: K2tog X 25. (25)
Row 22: P2tog X 12, P1. (13)
Cut off yarn, leaving a long tail. Use this length
of yarn to sew the hat seams together.

POMPOM
Wrap yellow yarn around your four fingers
around 80 times. The more you wrap, the
better your pompom will turn out. Carefully
slide the yarn off your fingers and tie a piece
of yarn around the center in a knot. Leave the
ends of this string long; you will use them later
to secure this pompom to the teddy’s hat.
With a pair of scissors, cut through the loops on
both sides of the pompom. Now begins the fun
part. Take your scissors and trim the pompom
into a round shape using the scissors. Once you
are satisfied with the shape of your pompom,
thread the long yarn ends of the pompom
onto a darning needle and secure your fluffy
pompom to the hat.

ATTACH EARS TO HEAD & HEAD TO BODY
Slide the hat on the teddy’s head and
using pearl headed pins, tack ears just
on the spots where the hat has slits
for ears. Carefully remove hat without
disturbing the ears. With a darning
needle, secure ears to head. Now sew
head to body and put the hat back on.

HOW TO MAKE A BAUBLE STITCH
YO, insert hook into next st, pull yarn
through (loops on hook = 3), yo, pull
through 2 loops (loops remaining on
hook = 2),
(YO, insert hook into the same st, YO,
pull through, YO, pull through 2 loops)
X 2 (loops remaining on hook = 5), YO,
pull yarn through all 5 loops

SCARF
Ch 82 with blue, and starting from 3rd st from
the hooki, hdc in each st across. FO and weave
in ends.

STOCKING
Round 1: With green, 8 sc in a magic ring.
Round 2: Inc around. (16)
Round 3-9: Sc around.
Round 10: Join red, sc 8, ch 1, turn.
Round 11-12: Sc 8, ch 1, turn.
Round 13: Sc 8, (fold the sock so that both
vertical edges of the heel meet; then using
green, join with a sc), sc 4 along the edge of the
heel, sc 8 across the main body, sc 4 along the
edge.
Before working on the next round, sew the gap
in the heel.
Round 14-20: Sc around.
Round 21: (3 sc, 1 inc) X 4. (20)
Round 22: Sc around.
Round 23-25: Join contrasting color and sc
around.
FO.
Wrap scarf around neck and tack stocking to
paws with a few stitches.

Desinger : https://talesoftwistedfibers.wordpress.com/
This is an original pattern by Tales of Twisted Fibers

Materials
• Sock weight yarn in in brown, white, yellow,
green [for plain bear] | brown, white, yellow,
blue [for striped bear]
• 2.5mm crochet hook
• A pair of 9mm safety eyes for each bear
• 15mm nose for each bear
• 10mm green star shaped button
• Fiber fill
• Green sewing thread
• Yarn needle
• Sewing needle
• Pearl headed pins

Terminology [US]
ch [chain]
st [stitch]
magic ring
sc [single crochet]
hdc [half double crochet]
dc [double crochet]
inc [increase]
dec [decrease]
FLO [front loop only]
sl st [slip stitch]
DIFFICULTY: Easy

FINISHED SIZE: 3.5 inches [9 cm] till the tip of
their ears / approximately 5.5 inches [14 cm] with
their hat on when made with the indicated yarn.

MUZZLE
With white yarn, ch 5.
Rnd 1: Starting from the second ch from the hook, sc in
the next 3 st, inc in the last ch. Working on the opposite
side of the foundation ch, sc in the next 3 ch. [8]
Rnd 2: (inc, sc) X 4. [12]
Rnd 3: sc around. [12]
Fasten off, leaving a long tail to sew. Insert nose in the
center of the muzzle and secure it in place with the
washer. Keep it aside.

HEAD & BODY
Plain Bear
Start with brown yarn.
Rnd 1: 10 sc in a magic ring. [10]
Rnd 2: inc X 10. [2]
Rnd 3: (sc, inc) X 10. [30]
Rnd 4: (sc 2, inc) X 10. [40]
Rnd 5-25: sc around. [40]
Rnd 26: (sc 2, dec) X 10. [30]
Rnd 27: (sc, dec) X 10. [20]
Lightly stuff the muzzle, pin it between Rnd 9 & 15 with
pearl headed pins and sew it in place.
Insert safety eyes on both sides of the muzzles between
Rnd 10 & 11.
Stuff the body with fiber fill.
Rnd 28: dec X 10. [10]
Rnd 29: dec X 5. [5]
Fasten off, leaving a tail for sewing. Using your
yarn needle, weave the yarn tail through the front
loop of each remaining stitch and pull it tight,
closing off the gap. Weave in the yarn end. Sew
the star shaped button on the chest.

Striped Bear
Start with brown yarn.
Rnd 1-15: Follow instructions for Plain Bear Rnd
1-15.
Rnd 16: With yellow yarn, sc around. [40]
Rnd 17: With white yarn, sc around. [40]
Rnd 18: With yellow yarn, sc around. [40]
Rnd 19: With white yarn, sc around. [40] Fasten off
this color.
Rnd 20: With yellow yarn, sc around. [40] Fasten
off this color.
Rnd 21-29: With brown yarn, follow instructions
for Plain Bear Rnd 21-29, including instructions for
fastening off and closing the gap.

EAR (make 2 in brown)
In a magic ring, sc, 2 hdc, 2 dc, 2 hdc, sc. Pull the
yarn tail to close the magic ring and form a semi
circle. Fasten off, leaving a tail to sew.
Pin the ears on the head, with the top of the ear
sitting between Rnd 4 & 5, and sew in place.

ARM (make 2)
Start with brown yarn.
Rnd 1: 6 sc in a magic ring. [6]
Rnd 2: inc X 6. [12]
Rnd 3-4: sc around. [12]
If making Plain Bear, continue working in brown till
the end. For Striped Bear, work with yellow yarn
from the next round onwards.
Rnd 5-6: sc around. [12]
Rnd 7: (sc, dec) X 4. [8]
Rnd 8-12: sc around. [8]
Fasten off, leaving a long tail to sew. The arms do
not need stuffing.
Flatten the top of the arm and sew it closed. Pin the
arm diagonally on the body, with the top of the arm
pinned on Rnd 16, and sew it in place.

Next, we will secure the arms to the body to prevent
it from moving.
Thread a yarn needle with brown / yellow yarn.
Insert needle from the bottom of the body, bring it
out from the area where the arm rest against the
body, which would be around Rnd 19. Make a tack
on the inside of the arm (between Rnd 10 & 11),
push the needle back into the body, and bring it
out from the bottom the body. Knot the yarn ends
together a few times to secure. Clip off excess yarn
and push remaining yarn back into the body.

SCARF
ch 67 with yellow / blue yarn.
Row 1: Starting from the second ch from the hook,
sc 66, ch 1, turn. [66]
Row 2: sc across. [66]
Fasten off, weave in the yarn ends. Tie the scarf
around the neck.

HAT
Start with green / blue yarn.
Rnd 1: 6 sc in a magic ring. [6]
Rnd 2: (sc, inc) X 3. [9]
Rnd 3: sc around. [9]
Rnd 4: (sc 2, inc) X 3. [12]
Rnd 5: sc around. [12]
Rnd 6: (sc 3, inc) X 3. [15]
Rnd 7: sc around. [15]
Rnd 8: (sc 4, inc) X 3. [18]
Rnd 9: sc around. [18]
Rnd 10: (sc 5, inc) X 3. [21]
Fasten off this color and join white yarn.
Rnd 11: sc around. [21]
Rnd 12: (sc 6, inc) X 3. [24]
Rnd 13: sl st in the front loop of the next st, ch 3.
Working in FLO, dc around; sl st in the first st to
join. [24]
Fasten off and weave in the yarn tail. Fold the
white border outwards.

Pom Pom
Rnd 1: With white yarn, 5 sc in a magic ring. [5]
Rnd 2: inc X 5. [10]
Rnd 3: sc around. [10]
Stuff very lightly.
Rnd 4: dec X 5. [5]
Fasten off and sew it on top of the hat. Secure the
hat on the head with a few tacks.