Other Patterns – Amigurumi – Amigurumi Free Patterns

Amigurumi Lion Free Crochet Pattern

admin — Sun, 30 Aug 2020 23:02:14 +0000

Hello dear visitors, I am here again with new amigurumi molds for you. I am sharing amigurumi patterns for you here for free. You can make your children happy by making these patterns. Amigurumi toys are very popular lately and are the most beautiful toys that don’t harm your kids. Your kids will love them. Let’s move on to our pattern and give them this gift.

Materials:
Approx 120 g size 4 yarn in main color (I used I Love this Yarn in Sungold)
Small amount of Ivory and Dark Brown worsted weight (for nose and mouth)
Bulky yarn in Brown for the Mane (I used Lion Brand Hometown USA in Billings Chocolate) For more information on what to look for in the mane yarn, please read my instructions below!
Crochet Hook in Size 3.75
Tapestry Needle
Polyfil
12mm safety eyes
stitch marker

Abbreviations
SC- single crochet
SC INC- single crochet increase (2 SC in each stitch)
INV DEC- Invisible decrease (put hook through the FRONT LOOP ONLY of two consecutive stitches [two loops on hook] Yarn over pull through both loops. [two loops on hook] Yarn over pull through two loops)
Magic Circle- Make a loop, leaving a long tail to work with. Insert hook in center of loop, yarn over and draw up a loop. Yarn over, pull through to make the first chain (this does not count as a stitch!). Continue to crochet over the loop and tail with the number of stitches called for. (If you need 6 SC, then crochet 6 SC inside the ring.) Pull the tail to close the circle.

Please take a minute and read through the whole pattern before you begin, especially about the mane and ears. I provide a lot of tips and tricks that will be helpful to know, and make it easier on you as you begin!

Amigurumi Crochet Lion Pattern

Nose/Mouth
Round 1: SC 5 in magic circle.
Round 2: SC INC in each around. (10)
Round 3: SC in the first, SC INC in the next. Repeat around. (15)
Round 4: SC in the first 2, SC INC in the next. Repeat around. (20)
Rounds 5-6: SC in each around. (20)
Slip stitch in the next 3 stitches. Fasten off and leave a long tail to sew on to the face. Get a long piece of brown yarn. Sew the nose on about row 4. You will see 5 sides of the nose, try to get the nose to be lined up on one of the sides. When you are ready to attach it, the bottom of the piece will be on row 27 and the top about row 35. Use pins to attach it. Sew it around and lightly stuff it.

Body and Head
Round 1: In a magic circle, 6 SC.
Round 2: SC INC in each around. (12)
Round 3: SC in first, SC INC in next. Repeat around. (18)
Round 4: SC in first 2, SC INC in next. Repeat around. (24)
Round 5: SC in first 3, SC INC in next. Repeat around. (30)
Round 6: SC in first 4, SC INC in next. Repeat around. (36)
Round 7: SC in first 5, SC INC in next. Repeat around. (42)
Rounds 8-13: SC in each around. (42)
Round 14: SC in first 5, INV DEC in the next. Repeat around. (36)
Rounds 15-16: SC in each around. (36)
Round 17: SC in first 4, INV DEC in the next. Repeat around. (30)
Rounds 18-19: SC in each around. (30)
Begin stuffing here.
Round 20: SC in first 3, INV DEC in the next. Repeat around. (24)
Rounds 21-22: SC in each around. (24)
Round 23: SC in first 2, INV DEC in the next. Repeat around. (18)
Round 24: SC in the first, INV DEC in the next. Repeat around. (12)
From here we are increasing the head.
Round 25: SC in first, SC INC in next. Repeat around. (18)
Round 26: SC in first 2, SC INC in next. Repeat around. (24)
Round 27: SC in first 3, SC INC in next. Repeat around. (30)
Round 28: SC in first 4, SC INC in next. Repeat around. (36)
Round 29: SC in first 5, SC INC in next. Repeat around. (42)
Round 30: SC in first 6, SC INC in next. Repeat around. (48)
Rounds 31-41: SC in each around. (48)
Attach eyes between rows 37 and 38, about 6 stitches apart. Begin to stuff here. I also stretch the base of the head a little bit so it is more defined, more round than oval. Sew on the nose at this time as well.
Round 42: SC in the first 6, INV DEC in the next. Repeat around. (42)
Round 43: SC in the first 5, INV DEC in the next. Repeat around. (36)
Round 44: SC in the first 4, INV DEC in the next. Repeat around. (30)
Round 45: SC in the first 3, INV DEC in the next. Repeat around. (24)
Round 46: SC in the first 2, INV DEC in the next. Repeat around. (18)
Round 47: SC in the first, INV DEC in the next. Repeat around. (12)
Round 48: INV DEC around. (6)
Fasten off and carefully sew the remaining hole closed.

Stuff the first half of the leg only.
Leg
Round 1: 6 SC in a magic ring
Round 2: SC INC in each around. (12)
Round 3: SC in first, SC INC in next. Repeat around. (18)
Round 4: SC in first 2, SC INC in next. Repeat around. (24)
Rounds 5-10: SC in each around. (24)
Round 11: SC in first 2, INV DEC in the next. Repeat around. (18)
Round 12: SC in each around. (18)
Round 13: SC in the first, INV DEC in the next. Repeat around.(12)
Rounds 14-28: SC in each around. (12)
I attached the legs to the bottom, placing the inside of the leg on approx round 2 of the body, angling them just slightly. I recommend pinning them to make sure you are happy with how they sit.

Stuff the first half of the arm only.
Arm
Round 1: 6 SC in a magic ring
Round 2: SC INC in each around. (12)
Round 3: SC in first, SC INC in next. Repeat around. (18)
Rounds 4-7: SC in each around. (18)
Round 8: SC in the first, INV DEC. Repeat around. (12)
Round 9: SC in each around. (12)
Rounds 10-25: SC in each around. (12)
Fasten off and leave a long tail to sew the arm onto the body. Attach between rows 22 and 23.

The Mane and Ears
I begin by making a “hair hat.” This is what you will attach the individual pieces of yarn hair to. It also helps to cover up the color of the head so you don’t have to attach quite so much hair. I used a worsted weight (I Love this Yarn from Hobby Lobby in Brown) and a size 6 bulky yarn. I used a brown Lion Brand Hometown USA but a similar bulky yarn, such as Bernat Chunky could also work. It is best if you use one that has multiple strands. I pulled these apart to make that curly, wavy look. You definitely can use worsted weight if you would like. But I would double up the strands as you attach them.

Hair Hat
Using worsted weight yarn and a size 4 hook.
You will connect each round with a slip stitch and chain 2, except for the last round.
Round 1: DC 10 in a magic circle.
Round 2: DC INC in each around.
Round 3: DC in the first, DC INC in the next. Repeat around.
Round 4: DC in the first two, DC INC in the next. Repeat around.
Rounds 5-8: DC in each around.
Fasten off a leave a long tail. You will use this to attach to the head.

Ears (make 2)
Round 1: 6 SC in a magic ring
Round 2: SC INC in each around. (12)
Round 3: SC in first, SC INC in next. Repeat around. (18)
Rounds 4-6: SC in each around. (18)
Fasten off and leave a long tail. Sew onto the hair hat, about two rows back and 6 stitches apart. Place them on with pins to make sure they are where you like them. Attach the ears before the hair!

Attaching the Hair
I begin by cutting yarn about 5 inches long. It was about perfect to wrap the yarn repeatedly around my hand and cut it at one end. Put your hook under one of the double crochets. Put the ends together so that it is halved, and put the end loop on the hook. Pull it through. Go through the loop and pull the ends back though and tighten it.

I attached one in every stitch around the front of the hat. Then every other stitch in the row behind. Then every two stitches. You won’t need as much as you think, although I do tend to go back and fill in where I would like it. Like I said before, I separated the strands. Then go through a trim it down. The front pieces are about 2 inches long, and the rest are about 3 or 4 inches long. Be sure not to begin too short! You can cut more, but not add more!

Tail
Round 1:In a magic ring SC 8.
Rounds 2-20: SC in each around.
Leave a long tail to attach to the body. I attached it centered in the back around row 7.
Attach worsted weight yarn similar to how you attached the mane for the tuft of tail. About 7 pieces.

More Amigurumi Lion İdeas

Amigurumi Monkey Free Pattern

admin — Sun, 30 Aug 2020 22:34:48 +0000

Materials:
Approx 120 g size 4 yarn in main color (I used I Love this Yarn in Brown)
Small amount of Ivory worsted weight
Embroidery thread for eyebrows
Crochet Hook in Size 3.75
Tapestry Needle
Polyfil
12mm safety eyes
stitch marker

Amigurumi Monkey Pattern

Face Piece
With Ivory:
Round 1: In a magic circle, 6 SC.
Round 2: SC INC in each around. (12)
Round 3: SC in first, SC INC in next. Repeat around. (18)
Round 4: SC in first 2, SC INC in next. Repeat around. (24)
Round 5: SC in first 3, SC INC in next. Repeat around. (30)
Round 6: SC in first 4, SC INC in next. Repeat around. (36)
Change to Brown
Round 7: SC in each around. Fasten off leaving a long tail to sew on the head.
When you attach it to the head, you will use the long brown tail. It will have a slight hexagonal shape, I lined one point of the hexagon toward the top of the head. Attach the eyes through the face piece between rows 3 and 4, about 3 stitches apart and then through the head around rows 36-37. Embroider the eyebrows about one row above the eyes.

Nose/Mouth
Round 1: In a magic circle, 6 SC.
Round 2: SC INC in each around. (12)
Round 3: SC in first, SC INC in next. Repeat around. (18)
Round 4: SC in first 2, SC INC in next. Repeat around. (24)
Round 5: SC in first 3, SC INC in next. Repeat around. (30)
Round 6: SC in first 4, SC INC in next. Repeat around. (36)
Rounds 7-8: SC in each around. (36)
Slip stitch in the next 3 stitches. Fasten off and leave a long tail to sew on to the face. Get a long piece of brown yarn. Sew the nose on about row 6. When you are ready to attach it, the bottom of the piece will be on row 27 and the top about row 36. Use pins to attach it. Sew it around and lightly stuff it. It will line up with the face piece. It will be attached after the face piece. Stuff as you go!

Stuff the first half of the leg only.
Leg
Using Ivory:
Round 1: 6 SC in a magic ring
Round 2: SC INC in each around. (12)
Round 3: SC in first, SC INC in next. Repeat around. (18)
Round 4: SC in first 2, SC INC in next. Repeat around. (24)
Rounds 5-10: SC in each around. (24)
Round 11: SC in first 2, INV DEC in the next. Repeat around. (18)
Change to Brown
Round 12: SC in each around. (18)
Round 13: SC in the first, INV DEC in the next. Repeat around.(12)
Rounds 14-28: SC in each around. (12)

Stuff the first half of the arm only.
Arm
Using Ivory:
Round 1: 6 SC in a magic ring
Round 2: SC INC in each around. (12)
Round 3: SC in first, SC INC in next. Repeat around. (18)
Rounds 4-7: SC in each around. (18)
Round 8: SC in the first, INV DEC. Repeat around. (12)
Round 9: SC in each around. (12)
Change to Brown
Rounds 10-25: SC in each around. (12)
Fasten off and leave a long tail to sew the arm onto the body. Attach between rows 22 and 23.

Ears (make 2)
Round 1: 6 SC in a magic ring
Round 2: SC INC in each around. (12)
Round 3: SC in first, SC INC in next. Repeat around. (18)
Round 4: SC in first 2, SC INC in next. Repeat around. (24)
Rounds 5-7: SC in each around. (24)
Fasten off and leave a long tail. Flatten the ear. It will have a slight curve. Pin the bottom to row 31 and the top to row 41. Attach it with the long tail.

Tail
Round 1:In a magic ring SC 8.
Rounds 2-30: SC in each around.
Leave a long tail to attach to the body. I attached it centered in the back around row 7.

More Amigurumi Monkey İdeas

Amigurumi Penguin Free Crochet Pattern

admin — Sun, 30 Aug 2020 15:03:58 +0000

Materials:
Approx 100 g size 4 yarn in main color (I used I Love this Yarn in Black)
Small amount white worsted weight
Small amount of yellow worsted weight
Crochet Hook in Size 3.75
Tapestry Needle
Polyfil
12mm safety eyes
stitch marker

Always move your stitch marker to the last stitch in the round. This pattern is worked in continuous rounds.

Body and Head
Using the black
Round 1: In a magic circle, 6 SC.
Round 2: SC INC in each around. (12)
Round 3: SC in first, SC INC in next. Repeat around. (18)
Round 4: SC in first 2, SC INC in next. Repeat around. (24)
Round 5: SC in first 3, SC INC in next. Repeat around. (30)
Round 6: SC in first 4, SC INC in next. Repeat around. (36)
Rounds 7-11: SC in each around. (36)
Round 12: SC in first 4, INV DEC in the next. Repeat around. (30)
Rounds 13-14: SC in each around. (30)
Begin stuffing here.
Round 15: SC in first 3, INV DEC in the next. Repeat around. (24)
Rounds 16-17: SC in each around. (24)
Round 18: SC in first 2, INV DEC in the next. Repeat around. (18)
Round 19: SC in the first, INV DEC in the next. Repeat around. (12)
From here we are increasing the head. Change to white color.
Round 20: SC in first, SC INC in next. Repeat around. (18)
Round 21: SC in first 2, SC INC in next. Repeat around. (24)
Round 22: SC in first 3, SC INC in next. Repeat around. (30)
Round 23: SC in first 4, SC INC in next. Repeat around. (36)
Rounds 24-33: SC in each around. (36)
Attach eyes between rows 27 and 28, 8 stitches apart.
Round 34: SC in the first 4, INV DEC in the next. Repeat around. (30)
Round 35: SC in the first 3, INV DEC in the next. Repeat around. (24)
Round 36: SC in the first 2, INV DEC in the next. Repeat around. (18)
Round 37: SC in the first, INV DEC in the next. Repeat around. (12)
Round 38: INV DEC around. (6)
Fasten off and carefully sew the remaining hole closed.

Black Head Piece
Note: It may be helpful to go up one size hook (or even a half size) for this piece. It will sit on the head and it is a very tight fit. I did not, but I did stretch it out before attaching, and I pulled it down to where I wanted it and used pins to keep it in place while I sewed it on. Don’t be intimidated, this is all much easier than it sounds!
Using the black
Round 1: In a magic circle, 6 SC.
Round 2: SC INC in each around. (12)
Round 3: SC in first, SC INC in next. Repeat around. (18)
Round 4: SC in first 2, SC INC in next. Repeat around. (24)
Round 5: SC in first 3, SC INC in next. Repeat around. (30)
Round 6: SC in first 4, SC INC in next. Repeat around. (36)
Rounds 7-13: SC in each around. (36)
Chain 1 and turn.
SC 7 across. Chain 1 and turn. (7)
INV DEC. SC in the next 3. INV DEC. Chain 1 and turn. (5)
INV DEC. SC in the next. INV DEC. (3)
Slip stitch across the new rows and around the entire head piece until you come back to where you started. Fasten off and leave a long tail to sew the black piece onto the white head. Center the dip between the eyes. You may have to stretch it a bit to go over the head, but you want it reasonably tight. Pin it in place and sew it on.

Beak
Using the yellow
Round 1: 6 SC in a magic circle.
Round 2: SC INC in each around. (12)
Round 3: SC in each around. (12)
Fasten off and leave a long tail to sew it on. Flatten the beak and pin it to the face, centered between the eyes, and right beneath the black dip.

Wings (make 2)
Using the black
Round 1: 6 SC in a magic circle
Round 2: SC in each around. (6)
Round 3: INC in each around. (12)
Round 4: SC in each around (12)
Round 5: SC in the first, INC in the next. (18)
Rounds 6-7: SC in each around. (18)
Round 8: SC in the first, INV DEC in the next. Repeat around. (12)
Fasten off and leave a long tail to sew it on. Attach it between rows 17 and 18 on either side.

Feet (make 2)
Using the yellow
Round 1: In a magic circle, 6 SC.
Round 2: SC INC in each around. (12)
Round 3: SC in first, SC INC in next. Repeat around. (18)
Round 4: SC in first 2, SC INC in next. Repeat around. (24)
Slip stitch in the next 3 stitches and fasten off, leaving a long tail to sew it on. Sew the back half of the circle onto the bottom of the penguin. The backs should cover most of the bottom, but the front half should peek out like little feet.

Scarf
Chain 50. In the second chain from hook, HDC. HDC in each chain across. Fasten off and weave in ends.

More Amigurumi Penguin İdeas

Amigurumi Rhino Free Crochet Pattern

admin — Sun, 30 Aug 2020 14:39:32 +0000

Materials:
About 100g I love this Yarn in Gray (or suitable worsted weight substitute)
12mm safety eyes
Stuffing
3.75mm hook
Small amount of white yarn
Needle for sewing
Stitch marker

Abbreviations
SC– single crochet

SC INC– single crochet increase (2 SC in each stitch)

INV DEC– Invisible decrease (put hook through the FRONT LOOP ONLY of two consecutive stitches [two loops on hook] Yarn over pull through both loops. [two loops on hook] Yarn over pull through two loops)

Magic Circle- Make a loop, leaving a long tail to work with. Insert hook in center of loop, yarn over and draw up a loop. Yarn over, pull through to make the first chain (this does not count as a stitch!). Continue to crochet over the loop and tail with the number of stitches called for. (If you need 6 SC, then crochet 6 SC inside the ring.) Pull the tail to close the circle.

Always move your stitch marker to the last stitch in the round. This pattern is worked in continuous rounds.

Crochet Rhino Amigurumi Pattern

Head
Round 1: In a magic circle, 6 SC.
Round 2: SC INC in each around. (12)
Round 3: SC in first, SC INC in next. Repeat around. (18)
Round 4: SC in first 2, SC INC in next. Repeat around. (24)
Round 5: SC in first 3, SC INC in next. Repeat around. (30)
Round 6: SC in first 4, SC INC in next. Repeat around. (36)
Rounds 7-12: SC in each around. (36)
Round 13: SC in first 5, SC INC in next. Repeat around. (42)
Round 14: SC in first 6, SC INC in next. Repeat around. (48)
Round 15-18: SC in each around. (48)
Attach the eyes between rows 12 and 13, 7 stitches apart. Begin to stuff here. Sew on any eyebrows or eyelashes with embroidery thread.
Round 19: SC in the first 6, INV DEC in the next. Repeat around. (42)
Round 20: SC in the first 5, INV DEC in the next. Repeat around. (36)
Round 21: SC in the first 4, INV DEC in the next. Repeat around. (30)
Round 22: SC in the first 3, INV DEC in the next. Repeat around. (24)
Round 23: SC in the first 2, INV DEC in the next. Repeat around. (18)
Round 24: SC in the first, INV DEC in the next. Repeat around. (12)
Round 25: INV DEC around. (6)
Fasten off and carefully sew the remaining hole closed.

Ears (make two)
Round 1: In a magic circle, 6 SC.
Round 2: SC in each around. (6)
Round 3: SC INC in each around. (12)
Round 4: SC in first, SC INC in next. Repeat around. (18)
Rounds 5-6: SC in each around. (18)
Round 7: SC in first, INV DEC in next. Repeat around. (12)
Round 8: INV DEC in each around. (6)
Fasten off leaving a long tail. Sew on between rows 20 and 21, about 8 stitches apart.

Horn
Using the white:
Round 1: In a magic circle, 6 SC.
Round 2: SC in each around.
Round 3: SC in first, SC INC in next. Repeat around.(9)
Round 4-6: SC in each around.
Fasten off, leaving a tail to sew on. Attach to the very front of the nose, about round 3-4.
Small Horn
Round 1: In a magic circle, 6 SC.
Rounds 2-3: SC in each around. (6)
Fasten off. Sew it on directly behind the larger horn.

Body
Round 1: In a magic circle, 6 SC.
Round 2: SC INC in each around. (12)
Round 3: SC in first, SC INC in next. Repeat around. (18)
Round 4: SC in first 2, SC INC in next. Repeat around. (24)
Round 5: SC in first 3, SC INC in next. Repeat around. (30)
Round 6: SC in first 4, SC INC in next. Repeat around. (36)
Round 7: SC in first 5, SC INC in next. Repeat around. (42)
Round 8-20: SC in each around. (42)
Begin to stuff here.
Round 21: SC in the first 5, INV DEC in the next. Repeat around. (36)
Round 22: SC in each around. (36)
Round 23: SC in the first 4, INV DEC in the next. Repeat around. (30)
Round 24: SC in each around. (30)
Round 25: SC in the first 3, INV DEC in the next. Repeat around. (24)
Round 26: SC in the first 2, INV DEC in the next. Repeat around. (18)
Rounds 27-29: SC in each around (18)
Fasten off, leaving a long tail. This is what you will use to sew on the head. Attach the head by pinning it in place. The nose will hang off toward the front, while the back will be mostly attached. Sew around multiple times. Make sure the neck is firmly stuffed before you attach.

Legs (make 2)
Start with white:
Round 1: 6 SC in a magic ring
Round 2: SC INC in each around. (12)
Round 3: SC in first, SC INC in next. Repeat around. (18)
Round 4: In the back loop only, SC in each around. (18)
Round 5: SC in each around. (18)
Change to Gray
Round 6-23: SC in each around. (18)
Round 24: SC in first 2, INV DEC in the next. Repeat around. (12)
Fasten off with a long tail to sew on. Attach the legs so that they lay flat on the ground in a sitting position. The bottom part of the leg will attach around round 7 of the body.

Arms (make 2)
Start with white:
Round 1: 6 SC in a magic ring
Round 2: SC INC in each around. (12)
Round 3: In the back loop only, SC in each around. (12)
Round 4: SC in each around. (12)
Change to gray.
Round 5-21: SC in each around. (12)
Fasten off with a long tail to sew on. The arms angle down slightly, the bottom of the arm around round 20, the top around round 23.

Tail
Chain 12
In the second chain from the hook, HDC. HDC in the remaining chains for a total of 10.
Fasten off. Cut 4 pieces of yarn to attach to the end of the tail. Fold in half and pull through using the hook. Pull the ends through the loop and pull tight. Separate the strands of the yarn for the tail end. Sew it on the backside, centered between the legs.

Head Fuzz
Now you can add the cute little hair fuzz! I cut 2 pieces of yarn about 6 inches long. Using your hook pull the yarn through. Pull the ends through the loop made when you pulled through. Pull tight! I attached them right between the ears. Now separate the strands like you did with the tail. Trim them up to your desired length! (NOTE: This picture is for my Friendly Elephant pattern, but the concept is the same!)

More Amigurumi Rhino İdeas

Ice Cream Amigurumi Big and Mini Free Crochet Pattern

admin — Tue, 25 Aug 2020 13:58:24 +0000

Supplies:
4mm crochet hook, 4/Medium
weight yarn in Main Color and
Cone Color. 9mm safety eyes,
tapestry needle, scissors, keychain
(optional), and stufng.

Additional Information:
Difculty: Easy
Make a big ice cream and a mini
scrap,/keychain version! This
pattern refers to “Main Color”. This
is the main color you will use for
your ice cream. We start by
creating the ice cream top, then the
cone, and we then sew them
together. Next, you can create a
mini ice cream, in which we sew on
a keychain and then assemble the
cone and ice cream together

Ice Cream Top:
IN MAIN COLOR
Round 1: 6 Sc in Magic Ring (6)
Round 2: Inc all around (12)
Round 3: Inc, Sc all around (18)
Round 4: Inc, Sc 2 all around (24)
Round 5: Inc, Sc 3 all around (30)
Round 6: Inc, Sc 4 all around (36)
Round 7: Inc, Sc 5 all around (42)
Round 8-11: Sc all around (42)
Round 12: Sc in the next 12 st. Sc in
the next st and add a different
colored stitch marker to the sc just
made. This marks where to place
the safety eye later. Sc in the next 4
st. Sc in the next st and add a
different colored stitch marker to
the sc just made. Sc in the next 24
st (42)
Round 13-16: Sc all around (42)
Add safety eyes in marked areas
now.
Round 17: Dec, Sc 5 all around
(36)
Round 18: Dec, Sc 4 all around
(30)
Round 19: In the FLO (Front Loop
Only),Dc 4 times in the next stitch, SlSt in the next stitch all around
(75)
Finish off and leave a long tail for
sewing. Set the ice cream aside for
now and we will assemble it to the
cone later

Cone:
IN CONE COLOR
Round 1: 6 Sc in Magic Ring (6)
Round 2: Inc all around (12)
Round 3-4: Sc all around (12)
Round 5: Inc, Sc all around (18)
Round 6-8: Sc all around (18)
Round 9: Inc, Sc 2 all around (24)
Round 10-11: Sc all around (24)
Round 12: Inc, Sc 3 all around
(30)
Round 13-14: Sc all around (30)
Round 15: Inc, Sc 4 all around
(36)
Round 16-17: Sc all around (36)
Finish off. Continue to “Assembly”.

Ice Cream Assembly:
IN MAIN COLOR
Take the tail of the yarn from the
ice cream and insert it into a
needle. Weave that tail of yarn to
the BLO left from Round 19 (Pic 1).
Line up the ice cream and cone as
shown, making sure the two tails of
yarn align (Pic 2). Sew them
together, going from the back loop
only from the ice cream to the cone
(Pic 3-5). Continue this until it’s
almost completely sewed shut.
Stuff here (Pic 6). Continue sewing
closed. Tie a knot with both ends of
yarn and weave them into the cone

Smile:
IN BLACK EMBROIDERY THREAD
Insert needle with thread into the
middle mouth area of the ice cream
and pull needle out around the left
eye as shown. Reinsert
needle into the original middle
insertion spot and pull needle out
around the right eye as shown.
Reinsert needle into the original
insertion spot. Done!

Mini Ice Cream Top:

IN MAIN COLOR
Round 1: 6 Sc in Magic Ring (6)
Round 2: Inc all around (12)
Round 3: Inc, Sc all around (18)
Round 4: Inc, Sc 2 all around (24)
Round 5: Sc all around (24)
Round 6: Sc in the next 8 st. Sc in
the next st and add a different
colored st marker to the Sc just
made. Sc in the next 2 st. Sc in the
next st and add a different colored
st marker to the Sc just made. Sc in
the next 12 st
Round 7-8: Sc all around (24)
Round 9: Dec, Sc 2 all around (18)
Round 10: *Repeat *2 Dc in the
next stitch, SlSt in the next stitch*
all around (27)
Finish off and leave a long tail for
sewing. Add safety eyes in the
marked areas from Round 6.
Set aside, we will assemble the ice
cream to the cone soon.

Mini Ice Cream Cone:
IN CONE COLOR
Round 1: 6 Sc in Magic Ring (6)
Round 2: Sc all around (6)
Round 3: Inc all around (12)
Round 4-5: Sc all around (12)
Round 6: Inc, Sc all around (18)
Round 7-8: Sc all around (18)
Finish off.

Adding a keychain:
IN MAIN COLOR FOR YARN
You can nd an old keychain and
reuse the metal part if you don’t
have a set of new ones. Take a ~5″
piece of yarn and put it on a needle.
Now insert the needle into the ice
cream as shown and pull out to the
top. Pull the needle
through the keychain and
insert it back into the ice cream.
Tie a rm knot a few times
with the two ends of yarn to secure. Done!

Cone Assembly:
IN MAIN COLOR
Take the tail of the yarn from the
ice cream and insert it into a
needle. Weave that tail of yarn to
the BLO left from Round 10.
Line up the ice cream and cone as
shown, making sure the two tails of
yarn align. Sew them
together, going from the back loop
only from the ice cream to the cone.
Continue this until it’s
almost completely sewed shut.
Stuff here. Continue sewing
closed. Tie a knot with both ends of
yarn and weave them into the cone

More Amigurumi İce Cream İdeas

Amigurumi Snowman Free Pattern

admin — Sat, 22 Aug 2020 23:45:25 +0000

Pattern : Tiny Mini Design
English Translation : @yarnolog

Supplies
Yarn – Yarnart Jeans
Safety Eyes- 6 mm
Polyester berll
Crochet hook 2,5 mm
Black nylon sewing thread
Wool needle, sewing needle and scissors

Abbreviations
sc = single crochet
inc = İncrease
dec = Decrease
st(s) = stitch(es)
sl st = slip stitch
ch = chain

HEAD
(White yarn)
Rnd 1. Magic ring and 6 sc into it.
Rnd 2. 6 inc (12)
Rnd 3.(1sc, 1inc)6 (18)
Rnd 4. (2sc, 1inc)6 (24)
Rnd 5. (3sc, 1inc)6 (30)
Rnd 6. (4sc, 1inc)6 (36)
Rnd 7. (5sc, 1inc)6 (42)
Rnd 8. (6sc, 1inc)6 (48)
Rnd 9. (7sc, 1inc)6 (54)
Rnd 10.(8sc, 1inc)6 (60)
Rnd 11. (9sc, 1inc)6 (66)
Rnd 12- 24. 66sc
Rnd 25. (9sc, 1dec)6 (60)
Rnd 26. (8sc, 1dec)6 (54)
Rnd 27. (7sc, 1dec)6 (48)
Rnd 28. (6sc, 1dec)6 (42)
Rnd 29. (5sc, 1dec)6 (36)
Rnd 30. (4sc, 1dec)6 (30)
Rnd 31. (3sc, 1dec)6 (24)
Rnd 32. 24sc. Fasten off.
Put the safety eyes between rows 18- 19 at the disctance 3 sc (safety eyes 6mm)

CARROT NOSE
(Orange Yarn)
Rnd 1. 9 chain and connect the rst chain slip stitch to make to ring
Rnd 2. 1ch, 9sc, cc (9)
Rnd 3. 1ch, 2sc, 1dec, 2sc, 1dec, 1sc, sl st (7)
Rnd 4-5. 1ch, 7sc, cc
Rnd 6. 1ch, 1sc, 1dec, 1sc, 1dec, 1sc, sl st (5)
Rnd 7. 1ch, 1dec, 3sc, cc (4)
15cm thread is cut, inserted into the needle and pulled.

BODY
(White yarn)
Rnd 1. Magic ring and 6 sc into it.
Rnd 2. 6inc (12)
Rnd 3. (1sc, 1inc)* 6 (18)
Rnd 4. (2sc, 1inc)6 (24)
Rnd 5. (3sc, 1inc)6 (30)
Rnd 6. (4sc, 1inc)6 (36)
Rnd 7. (5sc, 1inc)6 (42)
Rnd 8. (6sc, 1inc)6 (48)
Rnd 9. (7sc, 1inc)6 (54)
Rnd 10. (8sc, 1inc)6 (60)
Rnd 11-17. 60 sc
Rnd 18. Change claret red yarn 60sc
Rnd 19. BLO 60 sc (60)
Rnd 20. (8sc, 1dec)6 (54)
Rnd 21-22. 54sc
Rnd 23. (7sc, 1dec)6 (48)
Rnd 24. 48sc
Rnd 25. (6sc, 1dec)6 (42)
Rnd 26-27. 42sc
Rnd 28. (12sc, 1dec)3 (39)
Rnd 29. 39sc
Rnd 30. (11sc, 1dec)3 (36)
Rnd 31. 36sc
Rnd 32. (4sc, 1dec)6 (30)
Rnd 33.(3sc, 1dec)6 (24)
Rnd 34. 24sc
Change White yarn
Rnd 35. 24sc
For sweater, yarn is attached to the front loop in 19th row.
Rnd 1.1ch, o 60sc, sl st
Rnd 2-3. 1ch, 60sc, sl st
Change yellow yarn
Rnd 1. 1ch, 60sc, sl st
Rnd 2. 60 sl st. Fasten off

ARMS
(Green Yarn)
Rnd 1. Magic ring and 6 sc into it., sl st (6)
Rnd 2. 1ch, 6inc, sl st (12)
Rnd 3. 1ch, (1sc, 1inc)6 (18)
Rnd 4. 1ch, (2sc, 1inc)6 (24)
Rnd 5-7. 1ch, 24sc, sl st
Rnd 8. 1ch, (6sc, 1dec)3, sl st (21)
Rnd 9. 1ch, (5sc, 1dec)3 sl st (18)
Rnd 10. 1ch, (4sc, 1dec)*3 (15)
Rnd 11. 1ch, 15sc, sl st (15)
Rnd 12. 1ch, o 15sc, sl st (15)
Rnd 13-15. 1ch, 15sc, sl st
Change yellow yarn
Rnd 16. 1ch, 15sc, sl st
To continue arm, claret red yarn is attached to the back loop in 12th row.
Rnd 12. 15sc (15)
Rnd 13. 1dec, 13sc (14)
Rnd 14. 14sc
Rnd 15. 1dec, 12sc (13)
Rnd 16. 13sc
Rnd 17. 1dec, 11sc (12)
Rnd 18- 35. 12sc
20cm long yarn is cut for sewing

LEG
(Brown Yarn)
Rnd 1. Magic ring and 6 sc into it, sl st (6)
Rnd 2. 1ch, 6inc, sl st (12)
Rnd 3. 1ch, (1sc, 1inc)6 (18)
Rnd 4. 1ch, (2sc, 1inc)6 (24)
Rnd 5. 1ch, (3sc, 1inc)6 (30)
Rnd 6. 1ch, (2sc, 1inc)10 (40)
Change claret red yarn
Rnd 7. 1ch, blo 40sc, sl st (40)
Rnd 8-11. 1ch, 40sc, sl st (40)
Rnd 12. 1ch, 8sc, (3sc, 1dec)4, 12sc, sl st (36)
Rnd 13. 1ch, 8sc, (2sc, 1dec)4, 12sc, sl st (32)
Rnd 14. 1ch, 8sc, (1sc, 1dec)4, 12sc, sl st (28)
Rnd 15. 1ch, 8sc, (1dec)4, 12sc, sl st (24)
Rnd 16. 1ch, o 24sc, sl st (24)
Rnd 17-19. 1ch, 24sc, sl st (24)
Change yellow yarn
Rnd 20. 1ch, 24sc, sl st
To continue leg, white yarn is attached to the back loop in 16th row.
Rnd 16. 24sc
Rnd 17. (2sc, 1dec)6 (18)
Rnd 18. (4sc, 1dec)6 (15)
Rnd 19-43. 15sc
20cm long yarn is cut for sewing.

HAT
(Yellow Yarn)
Rnd 1. 6ch, continued from the 2nd chain 5sc, turn (5)
Rnd 2- 60. 1ch, blo 5sc,turn (5)
The rst row 5 chain in slip stitch to make to ring end row connect.
Rnd 1. Continue to the top of the hat. 1 chain is pulled and single crochet is applied to each row of edge band, connect to the
rst crochet with the slip stitch (60)
Change green yarn
Rnd 2-10. 1ch, 60sc, cc (60)
Rnd 11. 1ch, (8sc, 1dec)6, cc (54)
Rnd 12. 1ch, 54sc, cc (54)
Rnd 13. 1ch, (7sc, 1dec)6, cc (48)
Rnd 14. 1ch, 48sc, cc (48)
Rnd 15. 1ch, (6sc, 1dec)6, cc (42)
Rnd 16. 1ch, 42sc, cc (42)
Rnd 17. 1ch, (5sc, 1dec)6, cc (36)
Rnd 18. 1ch, (4sc, 1dec)6, cc (30)
Rnd 19. 1ch, (3sc, 1dec)6, cc (24)
Rnd 20. 1ch, (2sc, 1dec)6, cc (18)
Rnd 21. 1ch, (1sc, 1dec)6, cc (12)
Rnd 22. 1ch, 6dec, cc (6)
Change yellow yarn
Rnd 23. 6sc
Rnd 24. 6inc (12)
Rnd 25-26. 12sc
Rnd 27. (1sc, 1dec)4 (8) Rnd 28. (1dec)4 (4)

SCARF
(Green yarn)
Rnd 1. 7ch, 2nd 6sc, (6)
Rnd 2-100. blo 6sc

More Amigurumi Snowman İdeas

Amigurumi Orange Fox Free Pattern

admin — Sat, 22 Aug 2020 12:36:35 +0000

Materials:

Yarn Himalaya Dolphin Baby or YarnArt Dolce
YarnArt Jeans for embroidering a nose and brows
Hook size: 4.00 mm
10 mm safety eyes
Fiberfill

Amigurumi fox free pattern

Abbreviations:
R = row
mc = magic circle
sc = single crochet
inc = 2 sc in the next stitch
dec = single crochet 2 stitches together
( ) = number of stitches you should have at the end of the round/row
( ) x6 = repeat whatever is between the brackets the number of times stated

Head
With orange yarn:
R 1: 6 sc in mc (6)
R 2: (inc) х6 (12)
R 3: (1 sc, inc) х6 (18)
R 4: (2 sc, inc) х6 (24)
R 5: (3 sc, inc) х6 (30)
R 6: (4 sc, inc) х6 (36)
R 7: (5 sc, inc) х6 (42)
R 8-14: 42 sc (7 rows)
R 15: (5 sc, dec) х6 (36)
R 16: (4 sc, dec) х6 (30)
R 17: (3 sc, dec) х6 (24)
R 18: (2 sc, dec) х6 (18)
R 19: (4 sc, dec) х3 (15)

Muzzle
With white yarn:
R 1: 6 sc in mc (6)
R 2: (1 sc, inc) х3 (9)
R 3: 9 sc
R 4: (inc) х6, 3 sc (15)
R 5: (4 sc, inc) х3 (18)

Ears (make 2)
With orange yarn:
R 1: 6 sc in mc (6)
R 2: (1 sc, inc) х3 (9)
R 3: (2 sc, inc) х3 (12)
R 4: (3 sc, inc) х3 (15)
R 5: (4 sc, inc) х3 (18)
R 6-8: 18 sc (3 rows)

Body
With orange yarn:
R 1: 6 sc in mc (6)
R 2: (inc) х6 (12)
R 3: (1 sc, inc) х6 (18)
R 4: (2 sc, inc) х6 (24)
R 5: (3 sc, inc) х6 (30)
R 6: (4 sc, inc) х6 (36)
R 7-9: 36 sc (3 rows)
R 10: (4 sc, dec) х6 (30)
R 11: 30 sc
R 12: (3 sc, dec) х6 (24)
R 13-14: 24 sc (2 rows)
R 15: (2 sc, dec) х6 (18)
R 16-17: 18 sc (2 rows)
R 18: (4 sc, dec) х3 (15)

Arms (make 2)
With white yarn:
R 1: 6 sc in mc (6)
R 2: (1 sc, inc) х3 (9)
R 3-7: 9 sc (5 rows)
With orange yarn:
R 8-16: 9 sc (9 rows)
R 17: (1 sc, dec) х3 (6)
Fold top of arm flat and 3 sc through both sides across.

Legs (make 2)
With white yarn:
R 1: 6 sc in mc (6)
R 2: (inc) х6 (12)
R 3-4: 12 sc (2 rows)
R 5: (dec) х2, 8 sc (10)
With orange yarn:
R 6-18: 10 sc (13 rows)
Fold top of leg flat and 5 sc through both sides across.

Tail
With white yarn:
R 1: 6 sc in mc (6)
R 2: (1 sc, inc) х3 (9)
R 3: 9 sc
R 4: (2 sc, inc) х3 (12)
R 5: 12 sc
With orange yarn:
R 6: (3 sc, inc) х3 (15)
R 7-9: 15 sc (3 rows)
R 10: (3 sc, dec) х3 (12)
R 11: 12 sc
R 12: (2 sc, dec) х3 (9)
R 13: 9 sc
R 14: (1 sc, dec) х3 (6)
R 15: 6 sc
Fold top of tail flat and 3 sc through both sides across.

Better to sew details to each other with other yarn not with plush yarn.

Designed and photos by Julia Deinega
Instagram: @deynega_yuly

More Amigurumi Fox Ideas:

Little Mouse Free Amigurumi Pattern

admin — Wed, 19 Aug 2020 14:14:41 +0000

Materials:
Yarn: any yarn, the main one is gray, for overalls – any color, about the same thickness.
A crochet hook matched to your yarn
Filler of your choice
Beads (half-beads) for eyes
Black embroider thread for nose and eyebrows
Button for overalls
Yarn needle
Scissors
Row marker of contrast thread for marking

Abbreviations:
mr – a magic ring
st (sts) – stitch/es
ch.- chain/s
sl st – slip stitch/es
sc – single crochet
hdc – half double crochet
dc – double crochet
inc – increase/s
dec – decrease/s
FLO – work in front loop only
BLO – work in back loop only

Important: Work in spiral rounds, do not slip stitch unless otherwise specified by the pattern. Work in both loops of stitch.

Head
Rnd 1. 6 sc in a mr=(6 sc)
Rnd 2. 6 inc=(12 sc)
Rnd 3. (3 sc, inc) *3 times=(15 sc)
Rnd 4. (4 sc, inc) *3 times=(18 sc)
Rnd 5. (5 sc, inc) *3 times=(21 sc)
Rnd 6. (6 sc, inc) *3 times=(24 sc)
Rnd 7. 6 sc, 12 inc, 6 sc=(36 sc)
Rnd 8. sc around = 36 sc
Rnd 9. (5 sc, inc) *6 times=(42 sc)
Rnd 10. (6 sc, inc) *6 times=(48 sc)
Rnd 11-18. sc around = 48 sc
Rnd 19. (6 sc, dec ) *6 times=(42 sc)
Rnd 20. (5 sc, dec ) *6 times=(36 sc)
Rnd 21. (4 sc, dec ) *6 times=(30 sc)
Rnd 22. (3 sc, dec ) *6 times=(24 sc)
Stuff the head firmly
Rnd 23. (2 sc, dec ) *6 times=(18 sc)
Rnd 24. (1 sc, dec ) *6 times=(12 sc)
Rnd 25. 6 dec =(6 sc)
Rnd Close a hole

Ears
Don’t stuff the ears
Rnd 1. 6 sc in a mr=(6 sc)
Rnd 2. 6 inc=(12 sc)
Rnd 3. (1 sc, inc) *6 times=(18 sc)
Rnd 4. (2 sc, inc) *6 times=(24 sc)
Rnd 5. (3 sc, inc) *6 times=(30 sc)
Rnd 6-10. sc around = 30 sc
Rnd 11. (3 sc, dec ) *6 times=(24 sc)
Rnd 12. sc around = 24 sc
Rnd 13. (2 sc, dec ) *6 times=(18 sc)
Rnd 14. sc around = 18 sc
Rnd 15. (1 sc, dec ) *6 times=(12 sc)
Fold the ear in half and crochet 6 sc.
Leave a long tail for sewing.

Decoration the head
Glue the eyes (you can make sculpting before).
Embroider the nose
Sew the ears.
Embroider the eyebrows.

Hand
Stuff the lower part only
Rnd 1. 6 sc in a mr=(6 sc)
Rnd 2. 6 inc=(12 sc)
Rnd 3-5. sc around = 12 sc
Rnd 6. 4 dec , 4 sc=(8 sc)
Rnd 7-15. sc around = 8 sc
Fold in half and crochet 4 sc, cut off the yarn.

Legs
Stuff in process
Rnd 1. make 4 ch, start in the 2nd st from the hook: 2 sc, 3 sc in the last st, 1 sc, inc=(8 sc)
Rnd 2. inc, 1 sc, 3 inc, 1 sc, 2 inc=(14 sc)
Rnd 3-4. sc around = 14 sc
Rnd 5. 3 sc, 4 dec , 3 sc=(10 sc)
Rnd 6. 4 sc, dec , 4 sc=(9 sc)
Rnd 7-15. sc around = 9 sc
Rnd 16. 4 dec
Close a hole, hide a yarn tail.

Body
Rnd 1. 6 sc in a mr=(6 sc)
Rnd 2. 6 inc=(12 sc)
Rnd 3. (1 sc, inc) *6 times=(18 sc)
Rnd 4. (2 sc, inc) *6 times=(24 sc)
Rnd 5. (3 sc, inc) *6 times=(30 sc)
Rnd 6. (4 sc, inc) *6 times=(36 sc)
Rnd 7-13. sc around = 36 sc
Rnd 14. 9 sc, (1 sc, dec ) *6 times, 9 sc=(30 sc)
Rnd 15. sc around = 30 sc
Rnd 16. (3 sc, dec ) *6 times=(24 sc)
Rnd 17. sc around = 24 sc
Rnd 18. (2 sc, dec ) *6 times=(18 sc)
Rnd 19. 3 sc, attach the 1st hand with 4 sc, 5 sc, attach the 2nd hand with 4 sc, 2 sc=(18 sc)
Rnd 20-21. sc around = 18 sc
Cut off the yarn, leave a long tail for sewing

Assembling
Sew the head to the body. Sew the legs to the body.

Overalls
Leave a long tail for sewing the button
work in back-and-forth rows
make 30 ch
Rnd 1. start in the 6th ch from the hook: (1 dc, 2 dc in the 1 next st.)12 times, 1 dc=(37 sts)
Rnd 2. 1 ch + turn, 5 sc, 4 ch, skip 8 sts , 11 sc, 4 ch, skip 8 sts, 5 sc=(29 sc)
Rnd 3. 3 ch + turn, (1 dc, 2 dc in the 1 next st.)14 times, 1 dc=(43 dc)
Rnd 4-5. 3 ch + turn, 43 dc=(43 dc)
work in rounds
Rnd 6. 1 sl st in the 1st st, 3 ch, 43 dc, 1 sl st =(43 dc)
Rnd 7-11. 3 ch, 43 dc, 1 sl st =(43 dc)
Try on the overalls to the mouse. Sew some central stitches to make pants (about 6-7 sts ).

More Amigurumi Mouse Ideas:

Little Brother Elephants Amigurumi Free Pattern

admin — Wed, 19 Aug 2020 13:12:56 +0000

Head:
For the head, we take the main yarn,
gray. I have it half
cotton Alize Cotton Gold 100 g / 320 m.
Color 21 Hook number 2.
1st row: 6 SC in amigurumi ring
2nd row: 6 İNC (12)
3rd row: (1 SC, İNC) x repeat 6 times (18)
4th row: (2 SC, İNC) x repeat 6 times (24)
5 row: (3 SC, İNC) x repeat 6 times (30)
6 row: (4 SC, İNC) x repeat 6 times (36)
7 row: (5 SC, İNC) x repeat 6 times (42)
8-12 (5 rows) row: knit unchanged 42 SC
13 row: (6 SC, İNC) x repeat 6 times (48)
14-16 row (3 rows): knit unchanged 48 SC
17 row: (6 SC, DEC) x repeat 6 times (42)
Row 18: (5 SC, DEC) x repeat 6 times (36)
Row 19: (4 SC, DEC) x repeat 6 times (30)
We start filling the part. We fill tightly, distributing the filler
evenly around the edges to avoid unevenness.
Row 20: (3 SC, DEC) x repeat 6 times (24)
21 row: (2 SC, DEC) x repeat 6 times (18)
22 row: (1 SC, DEC) x repeat 6 times (12)
Sew SL ST into next st, then knit CH and pull out yarn. Fix
knot and hide the tip of the thread inside the part.
The head is ready. Thus, we will connect one more detail. Postpone
them before the assembly stage.

Ears:
For the ears, we take the yarn of the main, gray color. I have this half-cotton Alize
Cotton Gold 100 g / 320 m. Color # 21 Hook 2.
We start knitting with an amigurumi ring.
1st row: 6 SC in amigurumi ring
2nd row: 6 İNC (12)
3 row: (1 SC, İNC) x repeat 6 times (18)
4th row: (2 SC, İNC) x repeat 6 times (24)
5 row: (3 SC, İNC) x repeat 6 times (30)
6 row: (4 SC, İNC) x repeat 6 times (36)
7 row: (5 SC, İNC) x repeat 6 times (42)
Do SL ST into the next stitch, then knit CH and pull out the yarn. Fix
knot and hide the tip of the thread inside the part. Thus, we will link three more
details. Let’s put them aside until assembly.

Trunk:
For the trunk, we take yarn of the main, gray color. I have it half
cotton Alize Cotton Gold 100 g / 320 m.Color No21 Hook No2.
1st row: 6 SC in amigurumi ring
2 row: knit unchanged 6 SC
3rd row: (1 SC, İNC) x repeat 3 times (9)
4-5 row: knit unchanged 9 SC
6 row: (2 SC, İNC) x repeat 3 times (12)
7-8 row: knit unchanged 12 SC
9 row: (1 SC, İNC) x repeat 6 times (18)
10 row: knit unchanged 18 SC
11 row: (2 SC, İNC) x repeat 6 times (24)
Sew SL ST into next st, then knit CH and pull out yarn.
Let’s fix the knot. We fill.

REAR FEET + BOY’S TRUNK:
1st row: 6 SC in amigurumi ring
2nd row: 6 İNC (12)
3rd row: (3 SC, İNC) x repeat 3 times (15)
4 row: knit for the back floor loop 15 SC
5-6 row: knit unchanged 15 SC
Change the color of the thread to lilac.
7-16 row (10 rows): knit unchanged 15 SC
Cut off the thread. We knit the second part, without cutting off the threads, we make 3 CH,
we attach the first part, put a marker and continue to knit in a circle 36
SC. This is row 17.
Rows 18-23 (6 rows): Knit unchanged 36 SC
Change the thread color to light green.
24 row: knit for the back floor loop 36 SC
Row 25-26: knit unchanged 36 SC
27 row: (4 SC, DEC) x repeat 6 times (30)
Row 28-29: knit unchanged 30 SC
30 row: (3 SC, DEC) x repeat 6 times (24)
Row 31-32: knit unchanged 24 SC
33 row: (2 SC, DEC) x repeat 6 times (18)
34-35 row: knit unchanged 18 SC
Do SL ST into next st, then knit CH and pull
a thread. We will fasten the knot and hide the tip of the thread inside the part.

REAR FEET + GIRL’S TRUNK MR:
1st row: 6 SC in amigurumi ring
2nd row: 6 İNC (12)
3rd row: (3 SC, İNC) x repeat 3 times (15)
4 row: knit for the back floor loop 15 SC
5-16 row (12 rows): knit unchanged 15 SC
Cut off the thread. We knit the second part, without cutting off the threads, we make 3 CH,
attach the first piece, place a marker and continue knitting in a circle
36 SC. This is row 17.
Row 18: knit unchanged 36 SC. Change the thread color to pink. I have
this is Yarn Art Jeans No
19-20 row: knit unchanged 36 SC
21 row: knit for the back floor loop 36 SC
22 row: knit for the back floor loop 36 SC
Row 23-26: knit unchanged 36 SC
27 row: (4 SC, DEC) x repeat 6 times (30)
Row 28-29: knit unchanged 30 SC
30 row: (3 SC, DEC) x repeat 6 times (24)
Row 31-32: knit unchanged 24 SC
33 row: (2 SC, DEC) x repeat 6 times (18)
34-35 row: knit unchanged 18 SC
Sew SL ST into next st, then knit CH and pull out yarn. Fix
knot and hide the tip of the thread inside the part.

FRONT FEET BOY:
We begin to knit with a gray thread.
1st row: 6 SC in amigurumi ring
2nd row: 6 İNC (12)
3-5 row: knit unchanged 12 SC
Change the color of the thread to salad.
6-20 row: knit unchanged 12 SC
Fold the edges together. Knit SC.
GIRLS FRONT FEET MR:
We begin to knit with a gray thread.
1st row: 6 SC in amigurumi ring
2nd row: 6 İNC (12)
3-5 row: knit unchanged 12 SC
Change the thread color to pink.
Row 6-20: knit unchanged 12 SC
Fold the edges together. Knit SC.

Amigurumi Little Whale Free Pattern

admin — Tue, 18 Aug 2020 16:26:32 +0000

Materials:

Yarn Jeans YarnArt 55% cotton 45% polyacrylic, 160 m, 50 gr.
or COTTON GOLD Alize 55% cotton 45% acrylic, 330 m, 100 gr. or other yarn
suitable color
Hook 1.75 (or matching your yarn)
Holofiber for stuffing
Needle for stitching parts
Black buttons or finished eyes D 10 mm
A piece of white fleece
Instant glue gel
Mouline threads or black sewing threads, a needle for them
White thread cut for smile embroidery

Legend:
ch – chain
sc – single crochet
dec – decrease
inc – increase

Head and torso
We knit in a spiral! We use a marker so as not to lose the beginning of the row.
We stuff tightly during knitting, forming a slight bend in the tail
up.
1 row: 6sc in an amigurumi ring or in an air loop.
2nd row: (increase) – 6 times (12)
3rd row: (sc, inc) – 6 times (18)
4th row: (2 sc, inc) – 6 times (24)
5 row: (3 sc, inc) – 6 times (30)
6 row: (4 sc, inc) – 6 times (36)
7 row: (5 sc, inc) – 6 times (42)
8 row: (6 sc, inc) – 6 times (48)
9th row: (11 sc, inc) – 4 times (52)
10-15 rows: 52 sc
16 row: (11 sc, dec) – 4 times (48)
17, 18 rows: 48 sc
19 row: (6 sc, dec) – 6 times (42)
Rows 20-23: 42 sc
24 row: dec, 4 sc, dec, 28 sc, dec, 4 sc (39)
25 row: 39 sc
26 row: dec, 4 sc, dec, 25 sc, dec, 4 sc (36)
27 row: 36 sc
28 row: dec, 4 sc, dec, 22 sc, dec, 4 sc (33)
Row 29: 33 sc
30 row: dec, 4 sc, dec, 19 sc, dec, 4 sc (30)
Row 31: 30 sc
32 row: dec, 4 sc, dec, 16 sc, dec, 4 sc (27)
33 row: 27 sc
34 row: dec, 3 sc, dec, 15 sc, dec, 3 sc (24)
35 row: 24 sc
Row 36: dec, 3 sc, dec, 12 sc, dec, 3 sc (21)
37 row: 21 sc
38 row: dec, 3 sc, dec, 9 sc, dec, 3 sc (18)
Row 39: 18 sc
40 row: dec, 3 sc, dec, 6 sc, dec, 3 sc (15)
Row 41: 15 sc
42 row: dec, 3 sc, dec, 3 sc, dec, 3 sc (12)
43 row: 12 sc
44 row: (1 sc, dec) – 4 times (8)
45 row: 8 sc.
Do not completely close the hole! Cut the thread, hide the tip.

Tail (2 parts)
1 row: 6sc in an amigurumi ring or in an air loop.
2nd row: (1 sc, inc) – 3 times (9)
3rd row: (2 sc, inc) – 3 times (12)
4th row: (sc, inc) – 6 times (18)
Rows 5-7: 18 sc
8 row: (1 sc, dec) – 6 times (12)
9 row: 12 sc
10 row: (1 sc, dec) – 4 times (8)
11 row: 8 sc
12 row: 4 decreases
Cut the thread, leaving the tip for sewing.

Fins (2 parts)
1 row: 6sc in an amigurumi ring or in an air loop.
2nd row: (1 sc, inc) – 3 times (9)
3rd row: (2 sc, inc) – 3 times (12)
4th row: (3 sc, inc) – 3 times (15)
5 row: 15 sc
6 row: (3 sc, dec) – 3 times (12)
7 row: (1 sc, dec) – 4 times (8)
8 row: 8 sc
9 row: 4 decreases
Cut the thread, leaving the tip for sewing.

Assembly and design
1.In the hole that we have left at the end of knitting the torso,
we sew the details of the tail. At the base (near the body) you can sew details tail 1-2 stitches together.

Determine the places for the eyes: they should be located approximately
in the middle of the body from the barrels, the landmark is 13-14 rows from the beginning of knitting.
So that everything is symmetrical, as well as that holes are formed in
which “drown” the eyelet button loops, I used a thick knitting needle.
We pierce the body through and through, check (turning the body, looking from
all sides), is everything even.
Prepare the eyes: cut out the details in the form of a drop from a piece of white felt, in
make a cut in the center of them and put eye buttons on the loops. If you have
eyes are not on the loop, glue them to the felt. On the felt from the back
apply a little glue and sew / glue the eyes in place. Follow
the sameness and symmetry of white felt details!
Insert a black thread (sewing or floss) into the needle and a few stitches
we embroider the upper eyelid and cilia.
We attach the fins. First, we determine the optimal place for them,
fixing with pins and checking for symmetry. Approximate point for
fins are determined as follows: from the eye count down 5 sc, from the received
point back out 6-7 rows towards the tail. This is a rough point, maybe
you will like it better if the fins are closer to the nose or to the tail –
you decide. We sew the fins to the body – we attach only in 2-3
the last rows of the fin.
We embroider a smile. There is also room for your imagination. Me more
I like a half smile on one side: we draw the thread in the middle of the muzzle and
With 1-2 stitches we embroider the mouth to one of the eyes. You can shape
mouth tightening or embroider a full-fledged smile “from ear to ear.”