Materials

• Size 4 worsted weight yarn (50g of white yarn, small amounts of brown or black, pink for the nose, and beige for the horns) 
• 3.5 mm crochet hook (these are my favorites!)
• 9mm safety eyes 
• Black crochet/embroidery thread for eyelashes (optional) 
• Scissors and tapestry needle
• Stuffing
• Stitch markers (a piece of scrap yarn works great!)

Abbreviations: US terminology
MC- Magic circle
SC- Single crochet
SC INC- Single crochet increase
INV DEC- Invisible decrease
DC- Double crochet
St(s)- Stitch(es)

*Slowly stuff as you go, you want it to be firm but not stretched. You will be working in the round, I like using a stitch marker at the beginning of each round. The legs, body and head are made as one piece. 
Nose/Mouth-

This piece is worked crocheting on both sides of the foundation chain to create an oval shape, you will want to keep your chain fairly tight to help avoid the look of ‘holes’, we will also be working in the round

Ch 5

Round 1: SC in the 2nd chain from hook, SC in the next 2 chains, 3SC in the last chain; working down the other side of the foundation chain (see picture for reference), SC in the next 2 chains, complete 2SC in the last chain (which is also the first chain we started with) (10 SC)

Rounds 2-3: SC around (10 SC)

Fasten off leaving a long tail for sewing

Legs –

Make 2 – Using black or brown

Round 1: Create a magic circle with 6 SC

Round 2: SC INC in each st (12 SC)

Round 3: SC in the back loops only (12 SC)

Rounds 4-5: SC around (12 SC) Change to white

Rounds 6-12: SC around (12 SC)

Fasten off (when you finish the 2nd leg do not fasten off, proceed to round 13)

*Round 13 joins the legs together and starts the body, we will not be making a chain to connect the legs.

Round 13: Attach to the first leg with a SC (I like to make sure both color changes are facing the same way, I make this the back of the mini cow). SC around the first leg and then the second leg (24 SC) This completes your join and is where your next round will start, from here we will work the body.

Rounds 14-20 SC around (24 SC)

Round 21: SC in the first 2 sts, INV DEC in the next, repeat around (18 SC)

Round 22: SC around (18 SC)

Round 23: SC in the first stitch, INV DEC in the next, repeat around (12 SC)

Round 24: SC around (12 SC)

*Here is where we will start the head*

Round 25: SC in the first st, SC INC in the next, repeat around (18 SC)

Round 26: SC in the first 2 sts, SC INC in the next, repeat around (24 SC)

Round 27: SC in the first 3 sts, SC INC in the next, repeat around (30 SC)

Round 28: SC in the first 4 sts, SC INC in the next, repeat around (36 SC)

Rounds 29-33: SC around (36 SC)

NOTE: Here is where we will attach the facial features. Place the safety eyes 4 stitches apart between rounds 31-32. (For the girl version, I recommend sewing on the eyelashes before securing your safety eyes). Sew the nose piece centered between the eyes.

Round 34: SC in the first 4 sts, INV DEC in the next, repeat around (30 SC)

Round 35: SC in the first 3 sts, INV DEC in the next, repeat around (24 SC)

*Continue to stuff the head and neck firmly

Round 36: SC in the first 2 sts, INV DEC in the next, repeat around (18 SC)

Round 37: SC in the first stitch, INV DEC in the next, repeat around (12 SC)

Round 38: INV DEC around (6 SC)

Fasten off and sew remaining part closed, weave in your end

Ears

Make 2

With black or brown

Round 1: Create a magic circle with 7 SC

Rounds 2-3: SC around (7 SC)

Round 4: SC INC in each stitch around (14 SC)

Rounds 5-7: SC around (14 SC)

Fasten off leaving a long tail for sewing, fold ear in half and sew across to close the ear as pictured. 

Horns
Make 2

With beige

Round 1: Create a magic circle with 8 SC

Rounds 2-5: SC around (8 SC)

Fasten off leaving a long tail for sewing

Arms

Make 2 stuffing lightly at the bottom

With black or brown

Round 1: Create a magic circle with 6 SC

Round 2: SC in the first st, SC INC in the next, repeat around (9 SC)

Round 3: SC in the back loops only (9 SC)

Round 4: SC around (9 SC) Change to white

Rounds 5-11: SC around (9 SC)

At the end of round 11 pinch the arm flat and make 4 SC across the top to close, fasten off and leave a long tail to sew onto the body.

Spots

Make 3

Round 1: Create a magic circle with 6 SC, join with a slip stitch to the first SC, ch 1

Round 2: *2 DC in the same stitch, ch1, 2 SC in the next stitch*, repeat 2 more times, join with a slip stitch to the first SC (12 SC)

Fasten off leaving a long tail for sewing

Attaching everything together-

– Sew the arms onto the body centered with the head at round 23

– Sew the ears onto the head at round 4 on each side

– Next, sew the horns evenly spaced between the ears

– Lastly, sew your spots onto the body (I placed two on the front and one on the back)

Your mini cow is complete! I hope you have enjoyed making this pattern.

More Amigurumi Cow İdeas

Materials:
Yarn: yellow, orange, red, brown, white density is about 320m – 400m / 100g
1.5mm hook
Hollowfiber filler
Copper (aluminium) wire with a diameter of 0.9-1.0 mm, approximately 130 cm (for legs, you can take a wire with a diameter of 1.5)
Adhesive tape for insulation wire
Plastic eyes with a diameter of 10 mm,
Artificial eye lashes
See the step-by-step photos in russian version (download link):

Abbreviations and terms (US):
st – stitch
sc – single crochet
ch – chain
dc – double crochet
hdc – half double crochet
sl st – sliip stitch
inc = increase – 2 sc in 1 next st
dec = decrease – 2 st of the previous round crochet together
rnd – round/s
mr – magic ring
BLO – work in back loops only
FLO – work in front loops only

Head
orange yarn
1 rnd: 6 sc in magic ring
2 rnd: 6 inc = 12
3 rnd: (1 sc, inc)б times = 18 4 rnd: (2 sc, inc)б times = 24
5 rnd: (3 sc, inc)б times = 30 б rnd: (4 sc, inc)б times = 36
7-12 rnd: 36 sc
13 rnd: б sc, 6 inc, 12 sc, 6 inc, 6 sc = 48
14 rnd: б sc, (1 sc, inc)б times, 12 sc, (inc, 1 sc)б times , б sc = 60
15-20 rnd: 60 sc
21 rnd: 60 sc + 1 sc to move the beginning
22 rnd: б sc, (1 sc, dec)6 times, 12 sc, (dec, 1 sc)6 times , б sc = 48
23 rnd: 6 sc, б dec, 12 sc, б dec, 6 sc = 36
24 rnd: (4 sc, dec) *6 times = 30
25 rnd: (3 sc, dec) *6 times = 24
26 rnd: (2 sc, dec) *6 times = 18
27 rnd: 18 sc
Finish, cut off the yarn. Stuff well.

Beak (top piece)
yellow yarn
1 rnd: 3 sc in mr
2 rnd: З inc = 6
3 rnd: (1 sc, inc) * 3 times = 9
4 rnd: 9 sc
5 rnd: (2 sc, inc) * З times = 12
б rnd: 12 sc
7 rnd: (3 sc, inc) * З times = 15
8 rnd: (4 sc, inc) * З times = 18
9 rnd: (2 sc, inc) *6 times = 24
10 rnd: (3 sc, inc) *6 times = 30
11 rnd: (4 sc, inc) *6 times = 36
12rnd: (5 sc, inc) *6 times = 42
13 rnd: (6 sc, inc) *6 times = 48
14-16 rnd: 48 sc,
Finish, cut off the yarn.

Beak (lower piece)
1 rnd: 6 sc in magic ring
2 rnd: 6 sc
З rnd: (1 sc, inc) * З times = 9
4 rnd: (2 sc, inc) * З times = 12
5 rnd: (3 sc, inc) * 3 times = 15
б rnd: (4 sc, inc) * 3 times = 18
7 rnd: (5 sc, inc) * 3 times = 21
8 rnd: (6 sc, inc) * 3 times = 24
9 rnd: (7 sc, inc) *3 times = 27
10 rnd: (8 sc, inc) * 3 times = 30
Don’t cut the yarn!
Put together 2 pieces and make 18 sc.
Replace your row marker here.
Crochet 2 rounds: sc around (42).
Cut the yarn, leave a long tail for sewing. Make a crease on the bridge of the nose, folding the top part in half.
Try on the beak to the head. Sew it. Don’t stuff the beak.

Legs
brown yarn

Big toe (2 p.):
1 rnd: б sc in magic ring
2 rnd: б inc = 12
3-4 rnd: 12 sc
5 rnd: (1 sc, dec) *4 times = 8
б rnd: (2 sc, dec) * 2 times = 6
7-12 rnd: 6 sc.
Cut off the yarn, stuff the toes.

Toe (2 p. for each leg):
1 rnd: 6 sc in magic ring
2 rnd: б inc = 12
3-4 rnd: 12 sc
5 rnd: (1 sc, dec) *4 times = 8
б rnd: (2 sc, dec) *2 times = 6
7-11 rnd: б sc
For the last toe: don’t cut the yarn, stuff the toe. Collect the toes in a foot:

Foot
1 rnd: 3 sc along the 1st toe, 3 sc along the big toe, 6 sc along the 2nd toe, 3 sc along the big toe, 3 sc along the 1st toe = 18 sc
2-3 rnd: 18 sc
4 rnd: (1 sc, dec) *6 times = 12
5 rnd: 2 sc, 3 ch, skip 3 sc, 7 sc = 12
б rnd: 2 sc, 3 sc in chains, 7 sc = 12 (it’s a hole for the Leg)
7 rnd: 6 dec = 6
8-9 rnd: б sc
10 rnd: (1 sc, inc) * 3 = 9
11 rnd: 9 sc
12 rnd: (1 sc , dec) * 3 =6
Cut off the yarn, close the hole using a needle.

Remarks from the translator:
Since I’m also an amigurumi designer (a little), I will allow myself to give an advice on the wireframe from the Foot to the Head:
If the size of your rooster does not match author doll size, then the recommended wire length may not be enough for your doll. Therefore, I advise you to postpone this step of the work until the stage when you complete the Body. In this case you can put together all the parts and determine what length of the wire you need, so that it is enough to the top of the head.
Cut 4 pieces of wire about 9 cm long and two pieces about 30 cm. If your wire is thin, you can twist it in 2ply. Insulate the tips, insert them into the toes, connect them together, isolate the connection. You can insert the wire into the spur too. Stuff the foot and the spur. The long wire is “the spine” that goes to the head.

Leg
Make 8 sc around the hole in the center of the Foot
1-7 rnd: 8 sc
8 rnd: (2 sc, dec) * 2 times = 6
9-14 rnd: 6 sc.
Change yarn to orange
15 rnd: б inc = 12
16 rnd: 12 sc
17 rnd: (1 sc, inc) * б times = 18
18-19 rnd: 18 sc
20 rnd: (2 sc, inc) * 6 times = 24
21 rnd: 24 sc
Finish, cut off the yarn, leaving a long tail for sewing

Wings
orange yarn

The 1st (shortest) feather (2 p.)
1 rnd: б sc in magic ring
2 rnd: б inc = 12
3-5 rnd: 12 sc
б rnd: (1 sc, dec) *4 times = 8
7-10 rnd: 8 sc

The 2nd feather (2 p.)
1 rnd: 6 sc in magic ring
2 rnd: 6 inc = 12
3-5 rnd: 12 sc
б rnd: (1 sc, dec) *4 times = 8
7-12 rnd: 8 sc

The 3rd feather (2 p.)
1 rnd: б sc in magic ring
2 rnd: б inc = 12
3-5 rnd: 12 sc
б rnd: (1 sc, dec) *4 times = 8
7-14 rnd: 8 sc

The 4th ( longest) feather (2 p.)
1 rnd: 6 sc in magic ring
2 rnd: 6 inc = 12
3-5 rnd: 12 sc
б rnd: (1 sc, dec) *4 times = 8
7-16 rnd: 8 sc
Don’t cut off the yarn, continue crocheting. Don’t stuff the feathers.
Join the feathers in the Wing. Don’t replace your row marker.
17 rnd: 4 sc along the 4th feather, 8 sc along the 3rd one, 4 along the 4th one = 16 sc
18 rnd: 16 sc
19 rnd: 8 sc, apply the 2nd feather, make 8 sc along the 2nd feather, 8 sc = 24
20 rnd: 24 sc
21 rnd: 12 sc, 8 sc along the 1st feather, 12 sc = 32
22 rnd: 32 sc
23 rnd: 8 sc, dec, 12 sc, dec, 8 sc = 30
24 rnd: 7 sc, dec, 12 sc, dec, 7 sc = 28
25 rnd: б sc, dec, 12 sc, dec, 6 sc = 26
26 rnd: 5 sc, dec, 12 sc, dec, 5 sc = 24
27 rnd: 4 sc, dec, 12 sc, dec, 4 sc = 22
28 rnd: 3 sc, dec, 12 sc, dec, 3 sc = 20
29 rnd: 2 sc, dec, 12 sc, dec, 2 sc = 18
30 rnd: 1 sc, dec, 12 sc, dec, 1 sc = 16
31 rnd: dec, 12, dec = 14
32 rnd: dec, 10, dec = 12
33-36 rnd: 12 sc
Cut of the yarn, leaving a long tail. Stuff the Wing a little (optional). Install a wire in the longest feather (the feather length + 5 cm)

Body
1 rnd: б sc
2 rnd: 6 inc = 12
З rnd: (1 sc, inc) *6= 18
4 rnd: (2 sc, inc) *6= 24
5 rnd: (3 sc, inc) *6= 30
б rnd: (4 sc, inc) * 6 = 36
7 rnd: (5 sc, inc) *6= 42
8 rnd: (6 sc, inc) *6= 48
9 rnd: (7 sc, inc) *6= 54
10 rnd: 1 ch, skip 1 st (the hole for the leg wireframe), 7 sc, inc, 8 sc, inc, 3 sc, 1 ch, skip 1 st, 4 sc, inc, (8 sc, inc) *3 = 60
11 rnd: (9 sc, inc) *6= 66 (make 1 sc in the chains of the previous round)
12 rnd: (10 sc, inc) *6= 72
13 rnd: (11 sc, inc) *б = 78
14-22 rnd: 78 sc
23 rnd: 3 sc, (2 sc, dec) * 6 times, 51 sc = 72
24 rnd: 3 sc, (1 sc, dec) *б times, 51 sc = 66 – it’s place for rooster tail
25-27 rnd: 66 sc.
Install the leg wireframes, twist them and isolate the connection.
28 rnd: (9 sc, dec) *6 times = 60
29 rnd: (8 sc, dec) *6 times = 54
30 rnd: (7 sc, dec) * 6 times = 48
31 rnd: (6 sc, dec) *б times = 42
32 rnd: (5 sc, dec) * 6 times = 36
33 rnd: (4 sc, dec) *6 times = 30.
Install the wing frames at the 27th round. Attach them to the spine wireframe.
34 rnd: (3 sc, dec) *6 times = 24
35 rnd: 24 sc
36 rnd: (2 sc, dec) *6 times = 18
37-39 rnd: 18 sc
40 rnd: (1 sc, dec) *6 times = 12
41-51 rnd: 12 sc
52 rnd: (1 sc, inc) *6 times = 18
Sew the Wings. Install the spine frame in the Head. Sew the Head.
Sew the Legs to the Body.

Tail feathers (3 p.)
1 rnd: 6 sc in magic ring
2 rnd: 6 inc = 12
3 rnd: (2 sc, inc) * 4 times = 16
4-6 rnd: 16 sc
7 rnd: (2 sc, dec) 4 times = 12
8-10 rnd: 12 sc
11 rnd: (dec, 4 sc) * 2 times = 10
12-14 rnd: 10 sc
15 rnd: (dec, 3 sc) * 2 = 8
16-18 rnd: 8 sc
19 rnd: (dec, 2 sc) * 2 =6
20-22 rnd: 6 sc

Join all the feathers with orange yarn.
1 rnd: 3 sc along the 1st feather, 3 sc along the 2nd one, 6 sc along the 3rd one, 3 sc along the 2nd one,3 sc along the 1st one = 18 sc
2 rnd: 18 sc
3 rnd: (1 sc, dec) *6 times = 12
4 rnd: (1 sc, inc) *б times = 18
5 rnd: (2 sc, inc) * 6 times = 24
б rnd: 24 sc
Cut off the yarn, leave a long tail.

Сockscomb
Consist of 3 parts

Big part
1 rnd: б sc in magic ring
2 rnd: б inc = 12
З rnd: (1 sc, inc) *6 times = 18
4-6 rnd: 18 sc
7 rnd: (1 sc, dec) *6 times = 12
8-10 rnd: 12 sc
11 rnd: (dec, 4 sc) * 2 times = 10
12-15 rnd: 10 sc
16 rnd: (dec, 3 sc) * 2 times = 8
17-19 rnd: 8 sc

Middle part
1 rnd: 6 sc in magic ring
2 rnd: 6 inc = 12
3 rnd: (1 sc, inc) *6 times = 18
4-6 rnd: 18 sc
7 rnd: (1 sc , dec) * 6 times = 12
8-10 rnd: 12 sc
11 rnd: (dec, 4 sc) * 2 times =10
12-15 rnd: 10 sc
16 rnd: (dec, 3 sc) *2 times = 8
17 rnd: 8 sc

Small part
1 rnd: б sc in magic ring
2 rnd: б inc = 12
3 rnd: (2 sc, inc) * 4 times = 16
4-6 rnd: 16 sc
7 rnd: (2 sc, dec) *4 times = 12
8-9 rnd: 12 sc
10 rnd: (dec, 4 sc) * 2 times = 10
11-13 rnd: 10 sc
14 rnd: (dec, 3 sc) * 2 times = 8.
Join all 3 parts:
15 rnd: 4 sc along the small part, 4 sc along the middle part , 8 sc along the big part, 4 sc along the middle part, 4 sc along the small part = 24
16 rnd: 24 sc
Sew the cockcomb to the head

Beard
2 parts :
1 rnd: б sc in magic ring
2 rnd: б inc = 12
з rnd: (1 sc, inc) *6= 18
4-5 rnd: 18 sc
б rnd: (1 sc, dec) *6=12
7-9 rnd: 12 sc
10 rnd: б dec = 6
11-12 rnd: 6 sc
Join both parts with 3 sc, sew to bottom of the beak

Eyes
(Author thanks Maria Ustyushkina for this addition to the pattern)
Begin with white yarn
1 rnd. 6 sc in mr (6)
2 rnd. inc6 times (12) 3 rnd. (1sc, inc)6 times (18)
4 rnd. 18 sc (18)
5 rnd. (1sc, dec)6 times (12)
Install the eyes between the 2 and 3 rounds. Fix them, stuff a little.
6 rnd. dec6 times (6)
Sew the eyes to the head. Make purple.

Eyelids:
1 rnd: 11 ch
2 rnd: sc in the 2nd from the hook, 9 сон, turn
З rnd: dec, 6 sc, dec = 8, leave a long tail for sewing.
Glue the eyelashes, sew the eyelids.
You rooster is ready! 

You will need:

• Alpina Anabel yarn (120 m/50 g) 100% cotton, beige and orange colors
• Alize Bella yarn (180 m/50 g) 100% cotton, red color
• 2.25 mm crochet hook
• 6 mm safety eyes
• Yarn needle and scissors
• Fiberfill

Abbreviations:
R – row
ch – chain
st – stitch
sl st – slip stitch
sc – single crochet
dc – double crochet
inc – increase (2 sc in one stitch)
dec – decrease (2 sc together)
[…] – number of stitches you should have at the end of the row
(…) – repeat whatever is between the brackets the given number of times

Head and body
R 1: 6 sc in magic ring [6]
R 2: (inc) repeat 6 times [12]
R 3: (3 sc, inc) repeat 3 times [15]
R 4: (4 sc, inc) repeat 3 times [18]
R 5: (5 sc, inc) repeat 3 times [21]
R 6: (6 sc, inc) repeat 3 times [24]
R 7: (7 sc, inc) repeat 3 times [27]
R 8: (8 sc, inc) repeat 3 times [30]
R 9: (9 sc, inc) repeat 3 times [33]
R 10: (10 sc, inc) repeat 3 times [36]
Insert safety eyes between R 7 and R 8 at the distance of 3 st from each other.
R 11: 36 sc
R 12: (11 sc, inc) repeat 3 times [39]
R 13: 39 sc
R 14: (12 sc, inc) repeat 3 times [42]
R 15-18: 42 sc (4 rows)
R 19: (5 sc, dec) repeat 6 times [36]
R 20: (4 sc, dec) repeat 6 times [30]
R 21: (3 sc, dec) repeat 6 times [24]
R 22: (2 sc, dec) repeat 6 times [18]
R 23: (1 sc, dec) repeat 6 times [12]
R 24: (dec) repeat 6 times [6]
Fasten off.

Wings (make 2)
R 1: 6 sc in magic ring [6]
R 2: (inc) repeat 6 times [12]
R 3: (1 sc, inc) repeat 6 times [18]
sl st, 5 ch, sl st, 8 ch, sl st, 5 ch, 2 sl st – view video at 16:37.
Fasten off and leave a long tail for sewing.

Tail
Make 6 ch.
R 1: From the 2nd ch from hook: 5 sc, 1 turning chain
R 2: 1 sc, 5 ch, sl st, 8 ch, sl st, 5 ch, sl st, 1 sc – view video at 18:30.
Fasten off and leave a long tail for sewing.

Crest – view video at 19:55
With red yarn:
Make 9 ch.
From the 2nd ch from hook: ([1 sc, 2 dc, 1 sc], sl st) repeat 4 times
Fasten off and leave a long tail for sewing.

Beak – view video at 21:45
With orange yarn:
R 1: 5 sc sc in magic ring [5]
R 2: 5 sc
Fasten off and leave a long tail for sewing.

Feet (make 2)
With orange yarn:
R 1: 6 sc in magic ring [6]
R 2-3: 6 sc (2 rows)
Fasten off and leave a long tail for sewing.

More Amigurumi Chicken Ideas:

Materials

Any yarn of your choice (light horse, dark saddle);

Hook under the yarn (I have it 1.75);

Stuffing;

Aluminum wire (or any other wire);

Eyes beads;

Sewing needle;

Slicker;

Pastel for tinting;

Brushes.

Abbrevations

Sc – single crochet;

İnc – increase;

Dec – decrease;

3sc together – 3 single crochet under one vertex;

sl-st – slip-stith

Hdc – half crochet;

Ch – chain;

P – loop;

4sc together – 4 single crochet knitted together (under the same apex).

So let’s get started

Head

Knit with light yarn (in my case beige)

1) 2ch second from hook n

2) (inc) 6 times (12)

3) (1sc, inc) 6 times (18)

4) (2sc, inc) 6 times (24)

5) (3sc, inc) 6 times (30)

6) (4sc, inc) 6 times (36)

7) 5sc, inc, 2sc, inc, 3sc, inc, 4sc, inc, 3sc, inc, 4sc, inc, 6sc, inc, 2sc (43)

8) 4sc, inc, 3sc, inc, 3sc, inc, 4sc, inc, 5sc, inc, 4sc, inc, 5sc, inc, 7sc, inc (51)

9) 3sc, inc, 4sc, inc, 5sc, inc, 4sc, inc, 7sc, inc, 8sc, inc, 3sc, inc, 8sc (58)

10) Skip 28sc in 29p knit sc

Knit head

1) 29sc

2) 26sc (3hdc in 1p) 2 times (32)

3) 5sc, dec, 5sc, (dec) 2 times, 5sc, dec

9sc (28)

4) 9sc, (dec) 2 times, 11sc, inc, 3sc (27)

5) 27sc

6) 3sc, dec, 10sc, dec, 6sc, inc, 3sc (26)

7) 17sc, dec, 7sc (25)

8) 6sc, dec, 5sc, dec, 7sc, inc (24)

9) 20sc, (dec) 2 times (22)

10) 9sc, dec, 7sc, (dec, sc) 2 times (19)

11) 6sc, dec, sc, ub5sc, (dec) 2 times (15)

12) 15sc

13) 3sc, dec, 9sc (14)

14) 12sc, 3hdc in 1p, inc hdc, 1sc, dec, 1sc, hdc, hdc, inc hdc, hdc, hdc, 2sc, 6sc (17)

15-16) 17sc

Crammed

17) (dec, sc) 5 times dec

Finish

Neck

Attach the thread from the side (DO NOT FOLLOW THE MARKER)

1) 14sc, inc, 15sc (30)

2) 30sc

3) 30sc

4) 13sc, inc, 16sc (31)

5) 15sc, inc, 17sc (32)

6) 14sc, inc, 17sc (33)

7) 14sc, inc, 18sc (34)

8) 34sc

9) 13sc, inc, 3sc, inc, 17sc (36)

10) 15sc, inc, 2sc, inc, 17sc (38)

11) 38sc

12) 38sc

13) 16sc, inc, 1sc, inc, 19sc (40)

14) 19sc, inc, 20sc (41)

15) 41sc

16) inc, 17sc, (inc) 2 times, 16sc, inc, 2sc, inc, sc (46)

17-18) 46sc

Leave a long end for sewing

Front legs (2)

We knit with a light thread (do not follow the marker)

1) 2ch 6sc into the second loop from the hook (6)

2) (inc) 6 times (12)

3) (1sc, inc) 6 times (18)

4) Behind the back wall of 18sc

5) 18sc

6) 3hdc, 3sc, 4sc together, 3sc, 5hdc (15)

7) 6sc, dec, 7sc (14)

8) dec, 3sc, (dec) 2 times, 3sc, dec (10)

9) 9sc, (3hdc per 1 loop) 2 times (14)

10) 4sc, inc, 9sc (15)

11) 4sc, inc, 5sc together (12)

12) 10sc, dec (11)

13) 4sc, inc, 5sc, inc (13)

14-21) 13sc

22) 13sc

23) 2sc, inc, 2sc, (inc) 3 times, 2sc, inc, 2sc, inc (19)

24) 7sc, (inc) 2 times, 10sc (21)

25-26) 21sc

27) 5sc, dec, (3sc together) 2 times, dec, 5sc, dec (14)

28) 12sc, dec (13)

29-32) 13sc

33) 5sc, inc, 7sc (14)

34) 14sc

35) 6sc, inc, 7sc (15)

36) 15sc

To complete

Legs Rear (2)

Knit with light yarn (do not follow the marker)

1) 2ch 6sc into the second loop from the hook (6)

2) (inc) 6 times (12)

3) (1sc, inc) 6 times (18)

4) Behind the back wall of 18sc

5) 18sc

6) 3hdc, 3sc, 4sc together, 3sc, 5hdc (15)

7) 6sc, dec, 7sc (14)

8) dec, 3sc, (dec) 2 times, 3sc, dec (10)

9) 9sc, (3hdc per 1 loop) 2 times (14)

10) 4sc, inc, 9sc (15)

11) 4sc, inc, 5sc, 5 together (12)

12) 10sc, dec (11)

13) 4sc, inc, 5sc, inc (13)

14-24) 13sc

25) 5sc, (inc) 2 times, 6sc (15)

26) 6sc, inc, 6sc, (3hdc in 1p) 2 times (20)

27) 20sc

28) 6sc, inc, 8sc, 5hdc together (18)

29) 8sc, inc, 8sc, dec, 1sc (18)

30) 7sc, dec, 6sc, (dec) 2 times (17)

31) 6sc, 1sc, inc, 7sc, dec (18)

32) 7sc, inc, 8sc, dec (18)

33) 18sc

34) 7sc, inc, 8sc, dec (18)

35) 7sc, inc, 9sc (20)

36) 20sc

37) 4sc, inc, 3sc, inc, 4sc, inc, 5sc, inc (24)

38) 24sc

39) 7sc, inc, 9sc, inc, 6sc, inc (27)

40) 27sc

Fasten

Body

Knit with light yarn.

We count 4sc from the middle of the hind legs, starting from 5p we knit 7cc.

32ch

1) From 2p from the hook 31sc in the chain, 40sc on the hind legs, 30sc, inc on the other side

chains

2) 3sc, connect the front legs 5sc along the leg, 88sc, 5sc along the leg, 3sc (114)

3) 114sc

4) inc, 1sc, inc, 2sc, inc, 3sc, inc, 30sc, inc, 7sc, inc, 14sc, inc, 7sc, inc, 30sc, inc

, 2sc, inc, 3sc, 1sc, inc, 2sc (125)

5) 125sc

6) 5sc, inc, 9sc, pr24sc, inc, 8sc, inc, 8sc, inc, 12sc, inc, 27sc, 2sc, inc, 9sc, inc

, 5sc (134)

7-10) 134sc

11) 64sc, 3sc together, 68sc (132)

12) 1sc, dec, 3sc, dec, 5sc, dec, 22sc, dec, 10sc, dec, 12sc, dec, 12sc, dec, 10sc, dec

, 22sc, dec, 5sc, dec, 3sc, dec, 5sc (121)

13) 121sc

14) dec, 4sc, dec, 7sc, dec, 16sc, dec, 7sc, dec, 10sc, dec, 6sc, dec, 10sc, dec, 7sc, dec

, 16sc, dec, 7sc, dec, 4sc, dec, 3sc (109)

15-18) 109sc

Make the frame

19) 12sc, dec, 4sc, dec, 5sc, dec, sc, dec, 3sc, (2sc, dec) 4 times (dec) 3 times, (2sc, dec) 4 times

, 3sc, dec, sc, dec, 5sc, dec, 4sc, dec, 18sc (90)

20) 25sc, dec, 2sc, dec, 1sc, dec, (dec) 7 times dec, 1sc, dec, 2sc, dec, 32sc (77)

21) 27sc, dec, 1sc, (dec) 5 times, 1sc, dec, 35sc, (70)

we stuff

22) 70sc

23) 70sc

24) dec, 51sc, dec, sc, dec, 2sc, dec, (1sc, dec) 3 times (63)

25) (dec) 3 times, 16sc, (dec) 3 times, 3sc together, (dec) 3 times, 14sc, (dec) 6 times (46)

26) (dec) 3 times, 11sc, dec, dec, 3sc together, dec, dec, 10sc, dec, dec, sc, dec, dec

Finish, finish

Ears (2)

Light yarn

1) 2ch 6sc in the second n

Turn

2) 2sc, (inc) 2 times, 2sc (8)

turn

3) 3sc, (sc, hdc in the same loop) 2 times

turn

4) 4sc, (dc, dc, hdc) into 1 loop, 5sc

Then we knit 6sc on the base

Turn, 6sc

fix

Decor

Sew the hole and sew the head

Sew ears to the head

then follow the photos

Necessary materials:

You can knit from any yarn in any combination.

You will need at least 2 colors (head, body + paws, beak)

Or 3 colors (head, body + beak + paws)

Colors to your taste and color.

Also, if you have a desire, you will need to buy cotter pins.

For toys made of yarn up to 400m / 100 gr. size 1.6 * 20 mm smaller

footage, including a 2 * 20 mm bun. In total, 3 cotter pins (1 head and 2 wings) will be needed

They will need disks, their size depends on the yarn from which you plan to knit.

– fine yarn in the region of 500-600 m / 100 g. in wings discs about 6-

8-9 mm (I have 8) – 4 pcs. And in the head-neck 18-20 (head) 15-18 (neck). 1 to the head, 1 to the neck.

Accordingly, the less yarn you have, the larger

you will need disk size. For the bun, I take a combination of 35 (head) – 30 (neck).

For reinforcement, you will need a wire, a medical patch will still be needed for it.

Well, do not forget about the eyes, filler, thread for a tie, needles, round-nose pliers (for cotter pins). I am sure that you have a lot of this.

ATTENTION!!!

It is assumed that you have cotter pin skills in a toy!

In this description, the details of this and any

another type of mount!

Legend:

ch – chain

sc – single crochet

İNC – increase, from one sc, two get out

DEC –decrease, two sc knit together with one

DC – double crochet

Head:

İnto magic ring 6 sc

1p) İNC * 6 times = 12 sc

2p) (1 sc, İNC) * 6 times = 18 sc

3p) (2 sc, İNC) * 6 times = 24 sc

4p) (3 sc, İNC) * 6 times = 30 sc

5p) (4 sc, İNC) * 6 times = 36 sc

6-11r) straight 36 sc (6 rows)

12p) 8 sc, İNC * 4 times, (İNC, 1 sc) * 3 times, put extra. Marker for tightenings (center of the muzzle), (1 sc, İNC) * 3 times, İNC * 4 times, 8 sc = 50sc

13p) straight 50 sc

14p) (3 sc, DEC) * 10 times = 40 sc

15p) (8 sc, DEC) * 4 times = 36 sc

16p) (4 sc, DEC) * 6 times = 30 sc

17p) (3 sc, DEC) * 6 times = 24 sc

18p) (2 sc, DEC) * 6 times = 18 sc

19p) (1 sc, DEC) * 6 times = 12 sc

We stuff our heads tight enough, do not close. If you knit without a cotter pin, then we’ll continue the body with the same thread, if you close it, then leave the thread long enough to close the hole.

I can’t help you about safe eyes, because I put my eyes after tightening, I think somewhere in the 10-12 row. It is necessary to look at the toy and the size of the eye.

Beak:

Chain of 6 ch

1p) İNC, 1 sc, 3 sc in 1 loop, 1 sc, 3 sc in the outer loop, on the other side of the chain 4 sc = 14 sc

You have a traditional circle instead

it turns out a kind of triangle.

2p) İNC, 3 sc, 3 sc in 1 loop, 3 sc, İNC, 5 sc = 18 sc

3p) straight 18 sc

4p) 1 sc, 3 sc in 1 loop, 10 sc, 3 sc in 1 loop, 5 sc = 22 sc

5p) straight 22 sc

Leave the tail of the thread sufficient to sew the beak to the head. First we sew the beak, by the end of the sewing it needs to be fitted. Add. the marker on the muzzle is hidden under the beak, this is the middle of the muzzle and when sewing the beak we focus on it to sew evenly. The top of the beak should coincide with ext.

marker. After sewing it off. Tail from sewing beak, and to the head.

Next, we make the ducks.

We place needles on the sides of the beak. We take a large needle with a strong thread, it is better for the color of the head. I have brown to show you.

We fix the thread at the bottom of the head under the chin, as close as possible to the neck, as close as possible.

Insert the needle at point 1 (under the chin), display at point 2 (the edge of the eye, the place marked with the needle), enter at point 3 (second the edge of the buckle) and display at point 1 (under the chin). Pull the thread and fix it below the chin. You should have a dimple for the eye. The same thing is repeated with the second eye.

After making the weights, insert the cotter pin down the head, with a slight shift forward (see a photo). The cotter pin should be about 1/3 of the head, a little larger can be.

You should put it under the knitting, as it were, but a little, about 3 mm a little more, a little less. After the head is full it is full, the cotter pin is inserted, the head is closed by decreases to the end, the tail from the thread, and to the head.

If you make your head without a cotter pin, then you make weights and just leave your head open, then you just continue to knit the neck.

Neck, torso:

İnto magic ring 6 sc

1p) İNC * 6 times = 12 sc

2p) (1 sc, İNC) * 6 times = 18 sc

3-7p) straight 18 sc (5 rows)

after 4 rows it is necessary to install a cotter pin, the marker thread goes behind in the middle of the head. If you do not have a cotter pin in your head, you knit 1 row 12 sc and beyond, starting with 2 rows of description.

8p) 5 sc, İNC, 7 sc, İNC, 4 sc = 20 sc

9p) straight 20 sc

10p) 7 sc, İNC, 7 sc, İNC, 5 sc = 22 sc

11p) straight 22 sc

12p) (5 sc, İNC) * 3 times, 4 sc = 25 sc

IMPORTANT!!! The marker should be back in the middle of the head, if it has shifted, it is necessary to make offset loops. We fill the neck as necessary.

Start the body

13p) İNC * 2 times, 22 sc, İNC = 28 sc

14p) İNC * 4 times, 3sc, İNC, 15 sc, İNC, 2 sc, İNC * 2 times = 36 sc

15p) (1 sc, İNC) * 4 times, 24 sc, (1 sc, İNC) * 2 times = 42 sc

16p) straight 42 sc

Marche A different thread will always shift slightly to the side due to increases (to the right), this is normal.

17p) İNC * 6 times, 36 sc = 48 sc

18p) (1 sc, İNC) * 6 times, 36 sc = 54 sc

19-21p) straight 54 sc (3 rows)

if you will fasten the wings, then they will need to be installed in the region of the 18th row. I don’t know in which row to tie the wings, since I didn’t, but I think that this is the same row as for the cotter pin.

We sew the sewn-in version of the wings already after we fill and completely cover the body, we orient ourselves in this case visually.

22p) (DEC, 1 sc) * 5 times, DEC, 37 sc = 48 sc

23p) straight 48 sc (1 row)

if you knit paws, then 23, the most successful row. Paws get tied along the front of the body, in a row in one fret.

24p) (6 sc, DEC) * 6 times = 42 sc

25p) (5 sc, DEC) * 6 times = 36 sc

26p) (4 sc, DEC) * 6 times = 30 sc

27p) (3 sc, DEC) * 6 times = 24 sc

28p) (2 sc, DEC) * 6 times = 18 sc

We stuff the body, pushing it tight enough into the neck. If there will be reinforcement of the paws, then the body does not close, it does not stuff very much, so that it would be convenient to insert the wire.

29p) (1 sc, DEC) * 6 times = 12 sc

30p) DEC * to the end or close in any way convenient for you. Leave big enough

ponytail thread for tying the tail of a duck.

Wings:

İnto magic ring 5 sc

1p) 2 sc, 3 sc in 1 loop, 2 sc = 7 sc

2p) 3 sc, 3 sc in 1 loop, 3 sc = 9 sc

3p) straight 9 sc

4p) 4 sc, 3 sc in 1 loop, 4 sc = 11 sc

5p) straight 11 sc

6p) 5 sc, 3 sc in 1 loop, 5 sc = 13 sc

7p) straight 13 sc

8p) (1 sc, DEC) * 4 times, 1 sc = 9 sc

There are several options for closing the wings, it can be folded in half and knit sc, in this case, the wing just sews to the body. If you want to put the wings on the cotter pins, then the wing closes down to the end, or simply contracts after installing the disk and cotter pin in it. The cotter pin is inserted from the top with the edge.

I didn’t stuff the wing of the velor geese. Perhaps if the toy is knitted from thicker yarn, then stuffing will be necessary, you need to look.

Do not forget that the wings are right and left when installing cotter pins.

The cotter pin is displayed in the 7th or 8th row, it depends on the size of the disk in which it will give, but it is better in 8.

Paws:

If you will reinforce the legs, then this must be done in the process of knitting the legs, in this case the body closes only after the reinforcement is carried out in it.

For toes we do

2 blanks

Extreme finger:

İnto magic ring 6 sc, straight 6 sc – 1 row

(tear off the thread)

Middle finger

İnto magic ring 6 sc

1p) (1 sc, İNC) * 3 times = 9 sc

2p) straight 9 sc (tear off the thread)

Once again, we begin to knit a small finger

İnto magic ring 6 sc

1p) straight 6 sc

2p) Connect all the fingers together.

Put the marker thread at the beginning of the row.

3 sc (on the first finger, the one that started to knit), 5 sc (on the big middle finger), 6 sc (on the extreme, third finger), 4 sc (on the big middle finger) and 3 sc (on the first finger) = 21 sc

3p) straight 21 sc

4p) 9 sc, DEC, 8 sc, DEC = 19 sc

5p) 8 sc, DEC, 7 sc, DEC = 17 sc

6p) 7 sc, DEC, 8 sc = 16 sc

7p) (DEC, 6 sc) * 2 times = 14 sc

8p) (DEC, 5 sc) * 2 times = 12 sc

Now is the time to make the reinforcement of the foot, and fill it a little

(fingers)

We knit the heel in reverse rows

9p) 6 sc, ch – deploy

10p) we begin to knit about the second from the edge of the loop 4 sc, ch – deploy

11p) again from the second from the edge of the loop 2 sc, ch – deploy

Move the marker thread to the beginning of the row, now we have to make 12 sc tying the heel in a circle

12p) 2 sc, (on the side), 6 sc, (on the front), 2 sc (second barrel), 2 sc (behind the heel)

13p) DEC * 6 times = 6 sc

Now is the most convenient time to fill the leg to the end.

14-16p) straight 6 sc

Change the color to white or another color that fits the gosling.

17p) (1 sc, İNC) * 3 times = 9 sc

18-19p) straight 9 sc (2 rows)

If you are doing reinforcement, now you need to insert the wire into the body (it should not be stuffed) and connect it together. If you long ends of reinforcement, you can not bite them off, but twist them together and put them in the ass, so that the gosling would keep its balance even better. Only after this, the body is stuffed and closed to the end, and then paws are sewn to the body.

For reinforcement, you can use any wire. I wrap it with medical plaster. This will give her a fortress and a small volume. If necessary, leg, thigh we stuff additionally. It depends on the yarn from which you knit a gander.

Tail:

We withdraw the thread remaining after closing the body in the ass, in the middle. Do 3 ch unfold

Goose head up and facing you. We make 1 dc (double crochet) in a loop in the body just to the left of the exit point of the chain of air loops.

Now we fix all this with a connecting column, putting to the left, everything that we have on the hook. Those. all that you have tied down lay on your side and attach to the body. We turn the Goose upside down, but still face it. And we knit 6 dc in the base of the originally typed ch. We fix it with a connecting column, putting the columns in the other direction now. We hide the tail of the thread from the tail of the Geese in the body.

To make it clearer, the tail is tied out on the body.

If you enjoy making amigurumi, here I share this easy and free amigurumi pattern for you for free. Your kids will love these toys.

Crochet bull free amigurumi tutorial. Part 1

Designer: Zi handmade
Instagram: @zihandmade

You will need:

• Yarn: Himalaya Dolphin Baby or YarnArt Dolce: 2 colors (beige — 1 skein and brown — 0.5 skein), Himalaya Toffee Baby for hair
• 5.0 mm crochet hook
• 3.5 mm crochet hook (for tail)
• 18 mm safety eyes
• 2 plastic circles for feet sole
• Black non-plush yarn for embroidering eyelashes and eyebrows
• Sewing thread and needle
• Scissors
• Fiberfill

Height: 30 cm (11.8”).

Free crochet bull pattern

Abbreviations:
R — row
ch — chain
sc — single crochet
inc — increase
dec — decrease
[…] – number of stitches you should have at the end of the row
(…) – repeat whatever is between the brackets the given number of times

Arms (make 2)
With brown yarn:
R 1: 2 ch, 6 sc in 2nd ch from hook [6]
R 2: (inc) repeat 6 times [12]
R 3: (1 sc, inc) repeat 6 times [18]
R 4: (8 sc, inc) repeat 2 times [20]
R 5-6: 20 sc (2 rows)
R 7: (2 sc, dec) repeat 5 times [15]
Change to beige yarn:
R 8-12: 15 sc (5 rows)
R 13: (3 sc, dec) repeat 5 times [12]
R 14: (3 sc, inc) repeat 5 times [15]
R 15-19: 15 sc (5 rows)
Fold the top opening flat and 7 sc through both sides.

Ears (4 parts)

Make 2 with beige yarn:
R 1: 2 ch, 2 sc in 2nd ch from hook, ch, turn
R 2: inc, 1 sc, ch, turn (3)
R 3: inc, 1 sc, inc, ch, turn (5)
R 4: inc, 3 sc, inc, ch, turn (7)
R 5-8: 7 sc, ch, turn (4 rows)
R 9: dec, 3 sc, dec, ch (5)
Do not cut the yarn. Crochet will continue.

Make 2 with brown yarn:
R 1: 2 ch, 2 sc in 2nd ch from hook, ch, turn
R 2: inc, 1 sc, ch, turn (3)
R 3: inc, 1 sc, inc, ch, turn (5)
R 4-7: 5 sc (4 rows)

Put out beige part and brown part of the ear together with inner part (wrong side to wrong side) and crochet through both parts 7 sc, inc, 7 sc, 5 sc with beige yarn, sl st, 1 ch.
Fold the ear and crochet 3 sc through both sides across.
(View the video at 22:52 — 27:52)

Horns (make 2)
With brown yarn:
R 1: 2 ch, 4 sc in 2nd ch from hook [4]
R 2: (1 sc, inc) repeat 2 times [6]
R 3: 6 sc
R 4: (1 sc, inc) repeat 3 times [9]
R 5: 4 sc, inc, 4 sc [10]
R 6-9: 10 sc (4 rows)

Tail
With 3.5 mm crochet hook and beige yarn:
R 1: 2 ch, 4 sc in 2nd ch from hook [4]
Crochet the tail length 6-7 cm.
Fold the top opening flat and 2 sc through both sides.
(View the video at 36:30).

Crochet bull free amigurumi tutorial. Part 2

Legs + Body + Head

First leg
With brown yarn:
R 1: 2 ch, 6 sc in 2nd ch from hook [6]
R 2: (inc) repeat 6 times [12]
R 3: (1 sc, inc) repeat 6 times [18]
R 4: (2 sc, inc) repeat 6 times [24]
R 5: 24 sc into the partitions between the loops (watch the video at 02:50)
R 6-9: 24 sc (4 rows)
R 10: (2 sc, dec) repeat 6 times [18]
Change to beige yarn:
R 11-14: 18 sc (4 rows)
R 15: (1 sc, dec) repeat 6 times [12]
R 16: (1 sc, inc) repeat 6 times [18]
R 17-18: 18 sc (2 rows)
R 19: 6 sc
The first leg is ready.

Second leg
R 1-18: the same like for the first leg
R 19: 18 sc, 3 ch, connect with the first leg with 1 sc (view the video at 10:30), 11 sc [39]
R 20: 26 sc, (inc, 1 sc) repeat 3 times, inc, 9 sc [46]
R 21-25: 46 sc (5 rows)
R 26: 9 sc, 2 sc (with tail), 35 sc [46]
R 27-29: 46 sc (3 rows)
R 30: 26 sc, (dec, 1 sc) repeat 4 times, dec, 6 sc [41]
R 31: (5 sc, dec) repeat 5 times, 6 sc [36]
R 32-36: 36 sc (5 rows)
R 37: (4 sc, dec) repeat 6 times [30]
R 38: 13 sc, 7 sc (with 1st hand), 9 sc, 1 sc (with 2nd hand)
R 39: 6 sc (with 2nd hand), (1 sc, dec) repeat 2 times, 8 sc, dec, 1 sc, 2 dec, 1 sc, dec [24]
R 40: (2 sc, dec) repeat 6 times [18]
R 41: (2 sc, inc) repeat 6 times [24]
R 42: (inc) repeat 24 times [48]
R 43-50: 48 sc (8 rows)

Insert safety eyes between R 53 and R 54 at the distance of 6 stitches from each other.

Crochet bull free amigurumi tutorial. Part 3

R 51: 38 sc, (dec, 1 sc) repeat 3 times, dec — (1 loop from row 51 and 1 loop from row 52. View the video at 01:50)
R 52: (1 sc, dec) repeat 2 times, 37 sc [42]
R 53: (5 sc, dec) repeat 6 times [36]
R 54-56: 36 sc (3 rows)
R 57: 8 sc, 3 sc (with 1st ear), 15 sc, 3 sc (with 2nd ear), 7 sc [36]
R 58: (4 sc, dec) repeat 6 times [30]
R 59: (3 sc, dec) repeat 6 times [24]
R 60: (2 sc, dec) repeat 6 times [18]
R 61: (1 sc, dec) repeat 6 times [12]
R 62: (dec) repeat 6 times [6]

Muzzle (view video at 14:53)
With brown yarn:
Make 7 ch.
R 1: 5 sc, 3 sc into one loop [8]
R 2: on the opposite side of chain: 5 sc, 3 sc into one loop [8]
R 3: 5 sc, inc, 1sc, inc [10]
R 4: on the opposite side: 5 sc, inc, 1 sc, inc [10]
R 5: 7 sc, 2 inc, 1 sc [12]
R 6: on the opposite side: 7 sc, 2 inc, 1 sc [12]
R 7-10: 12 sc (4 rows)

Sew muzzle to the head between R 43 and R 50. Put some stuffing inside the muzzle before you finish.
Embroider eyelashes with black thread over the eyes. Embroider eyebrows at the distance of 6 stitches from each other and by skipping 1 row up from the eyes.

More Amigurumi Bull İdeas

If you enjoy making amigurumi, here I share this easy and free amigurumi pattern for you for free. Your kids will love these toys.

The size of the toy and the amount of material used depends on YOUR

knitting density and yarn thickness.

Toy height 42 cm, sitting 30 cm

You will need:

• Yarn HiMALAYA dolphin BABY white (80301) 1,5 skein
• Yarn HiMALAYA dolphin BABY pink (80303) 0.5 skein
• Yarn HiMALAYA dolphin BABY beige (80342) for horns
• HiMALAYA dolphin BABY brown yarn (80337) for hooves
• Yarn HiMALAYA dolphin BABY pink marshmallow (80346) muzzle
• Hook number 4.0
• Holofiber filler
• Eyes with a diameter of 20 mm on a secure mount
• Lace 1-1.5 meters
• White threads No. 40
• Decorative flowers for decoration
• Thread for stitching parts and embroidering eyebrows, I use YarnArt

JEANS

• You can use any other color matching.
• Needles for stitching parts
• Dry pastel for tinting ears
• Clay moment “CRYSTAL”

Legend

SC single crochet

İNC – increase

Dec – decrease

CH- chain

() * – repeat the indicated number of times

LEGS

Start knitting with a brown thread

1st row. 2 CH, knit 6 SC (Magic ring) into the second loop from the hook

2nd row. 6 İNC (12)

3rd row. (1SC, İNC) * 6 (18)

4th row. (2SC, İNC) * 6 (24)

5 row. (3SC, İNC) * 6 (30)

6 row. (4SC, İNC) * 6 (36)

7 row. 36 SC behind the rear hinges

8-10 row. 36 SC

Change to the thread of the main color

11-12 row. 36 SC

13 row. (4SC, DEC) * 6 (30)

14 row. 30 SC

15 row. (3SC, DEC) * 6 (24)

16 row. (2SC, DEC) * 6 (18)

Fill with filler.

Then, in the process of knitting, fill with filler. The very top of the legs is not

fill.

17-30 row. We knit without changes 18 SC (14 rows)

Fasten and cut the thread.

PENS

Start knitting with a brown thread

1st row. 2 CH, knit 6 SC (Magic ring) into the second loop from the hook

2nd row. 6 İNC (12)

3rd row. (1SC, İNC) * 6 (18)

4th row. (2SC, İNC) * 6 (24)

5 row. (3SC, İNC) * 6 (30)

6 row. 30 SC behind the rear hinge walls

7-8 row. 30 SC

Change to the thread of the main color

9-10 row. 30 SC

11 row. (3SC, DEC) * 6 (24)

12 row. 24 SC

13 row. (2SC, DEC) * 6 (18)

Fill with filler.

Then, in the process of knitting, fill with filler. The very top of the pen doesn’t fill.

14-27 row. We knit without changes 18 SC (14 rows)

Fasten and cut the thread.

HEAD

The beginning row marker runs in the center of the head

1st row. 2 CH, knit 6 SC (Magic ring) into the second loop from the hook

2nd row. 6 İNC (12)

3rd row. (1SC, İNC) * 6 (18)

4th row. 1SC, İNC (2SC, İNC) * 5, 1SC (24)

5 row. (3SC, İNC) * 6 (30)

6 row. 2SC, İNC (4SC, İNC) * 5, 2SC (36)

7 row. (5SC, İNC) * 6 (42)

8 row. 3SC, İNC (6SC, İNC) * 5, 3SC (48)

9-12 row. We knit without changes 48 SC (4 rows)

13 row. (7SC, İNC) * 6 (54)

14 row. 4SC, İNC (8SC, İNC) * 5, 4SC (60)

Between the 13-14 rows we insert the eyes. Eye spacing 3 SC

15-21 row. We knit without changes 60SC (7 rows)

22 row. 4SC, DEC (8SC, DEC) * 5, 4SC (54)

23 row. (7SC, DEC) * 6 (48)

24 row. 3SC, DEC (6SC, DEC) * 5, 3SC (42)

25 row. (5SC, DEC) * 6 (36)

26 row. 2SC, DEC (4SC, DEC) * 5, 2SC (30)

Fasten and cut the thread. Fill with filler

BODY

The marker runs in the center of the back.

1st row. 2 CH, knit 6 SC (Magic ring) into the second loop from the hook

2nd row. 6 İNC (12)

3rd row. (1SC, İNC) * 6 (18)

4th row. 1SC, İNC (2SC, İNC) * 5, 1SC (24)

5 row. (3SC, İNC) * 6 (30)

6 row. 2SC, İNC (4SC, İNC) * 5, 2SC (36)

7 row. (5SC, İNC) * 6 (42)

8 row. 3SC, İNC (6SC, İNC) * 5, 3SC (48)

9 row. (7SC, İNC) * 6 (54)

10 row. 4SC, İNC (8SC, İNC) * 5, 4SC (60)

11 row. (9SC, İNC) * 6 (66)

12 row. In this row we knit the legs, grabbing through the loops of the legs and bodies

13SC, 9SC with foot, 22SC, 9SC with foot, 13SC (66)

13-15 row. We knit without changes 66 SC (3 rows)

Change to a pink thread

16 row. 66 SC

17 row. 66SC behind the rear hinge walls

18 row. 66 SC

19 row. (9SC, DEC) * 6 (60)

20-21 row. 60 SC

22 row. 4SC, DEC (8SC, DEC) * 5, 4SC (54)

23-24 row. 54SC

25 row. (7SC, DEC) * 6 (48)

26-27 row. 48 SC

28 row. 3SC, DEC (6SC, DEC) * 5, 3SC (42)

29-30 row. 42 SC

31 row. In this row we knit handles, grabbing through the loop of the arm and body

6SC, 9 SC with handle, 12SC, 9SC with handle, 6 SC (42)

32 row. (5SC, DEC) * 6 (36)

33 row. 2SC, DEC (4SC, DEC) * 5, 2SC (30)

Fasten and cut the thread. Fill with filler

FRONT HINGE WALLS 17 ROWS KNIT 66 SC white thread

Muzzle

Dial a chain of 9 CH

1st row. Starting from the 2nd loop from the hook 7SC, 3SC in one loop, 6SC,

inc (18)

2nd row. İNC, 6SC, 3İNC, 6SC, 2İNC (24)

3rd row. 1SC, İNC, 6SC (1SC, İNC) * 3, 6SC (1SC, İNC) * 2 (30)

4th row. 2SC, İNC, 6SC (2SC, İNC) * 3, 6SC (2SC, İNC) * 2 (36)

5 row. 3SC, İNC, 6SC (3SC, İNC) * 3, 6SC (3SC, İNC) * 2 (42)

6 row. 4SC, İNC, 6SC (4SC, İNC) * 3, 6SC (4SC, İNC) * 2 (48)

7 row. 48SC

8 row. 4SC, DEC, 6SC (4SC, DEC) * 3, 6SC (4SC, DEC) * 2 (42)

Fasten and cut the thread. Fill with filler.

HORNS

1st row. 2 CH, knit 6 SC (Magic ring) into the second loop from the hook

2nd row. (1SC, İNC) * 3 (9)

3rd row. 9SC

4th row. (2SC, İNC) * 3 (12)

5 row. 12SC

6 row. (3SC, İNC) * 3 (15)

7 row. 15 SC

Fasten and cut the thread.

Fill with filler

EARS

1st row. 2 CH, knit 6 SC (Magic ring) into the second loop from the hook

2nd row. 6SC

3rd row. 6İNC (12)

4th row. (3SC, İNC) * 3 (15)

5-8 row. 15 SC

9 row. (3SC, DEC) * 3 (12)

10 row. (2SC, DEC) * 3 (9)

11 row. (1SC, DEC) * 3 (6)

Fasten and cut the thread. Do not fill with filler

TAIL

Start knitting with a brown thread

1st row. 2 CH, knit 4SC (Magic ring) into the second loop from the hook

2nd row. 4 İNC (8)

3rd row. 8 SC

4th row. (1SC, İNC) * 4 (12)

5 row. (2SC, İNC) * 4 (16)

6 row. (3SC, İNC) * 4 (20)

7-8 row. 20 SC

9 row. (3SC, DEC) * 4 (16)

10 row. (2SC, DEC) * 4 (12)

11 row. (1SC, DEC) * 4 (8)

Fill with filler

Change to the thread of the main color

13-28 row. We knit without changes 8 SC (17 rows)

Fasten and cut the thread.

Do not fill with filler.

SKIRT

We take the lace and do the assembly around the edge.

All details are ready, we proceed to the design.

Sew the head to the cow. We outline the location of the muzzle, sew,

adding filler, give shape. Embroider the nostrils in one thread.

We outline the location of the horns and ears and sew. Inside the ears we tint

dry pastel. We embroider the eyebrows. The cow’s face is ready!

Sew the tail in the center of the 16th row. We take our skirt

with pins for the 17th row (where we knit 66SC for the front walls

loops). Sew carefully. We decorate a blouse with decorative flowers,

sticking them to the glue moment * CRYSTAL *. Optionally, you can do

bow and sew to the eye.

More Amigurumi Cow İdeas

If you enjoy making amigurumi, here I share this easy and free amigurumi pattern for you for free. Your kids will love these toys.

Term Used:

slst – slip stitch

ch – chain

sc – single crochet

inc – increase

dec – decrease

Goby “Boris”

Yarn “Children’s novelty”

Color (St. Cherry, black.)

I have a hook 1.25

Eyes half beads 0.6 mm

Hollofiber

If yarn and hook meet the requirements mine, then the size of the toy without horns will be 10 cm, with horns – 17 cm

Free description

The head is a thread of cherry color.

1) İNTO MAGİC RİNG – 6 sc

2) 6 inc = 12 sc.

3) (1 sc, 1 inc) * 6 = 18 sc.

4) (2 sc, 1 inc) * 6 = 24 sc.

5) (3 sc, 1 inc) * 6 = 30 sc.

6) (4 sc, 1 inc) * 6 = 36 sc.

7) (5 sc, 1 inc) * 6 = 42 sc.

8) (6 sc, 1 inc) * 6 = 48 sc.

9) (7 sc, 1 inc) * 6 = 54 sc.

From 10 to 17 rows of 54 sc.

18) (7 sc, 1 dec) * 6 = 48 sc.

19) (6 sc, 1 dec) * 6 = 42 sc.

20) (5 sc, 1 dec) * 6 = 36 sc.

21) (4 sc, 1 dec) * 6 = 30 sc.

22) (3 sc, 1 dec) * 6 = 24 sc.

23) (2 sc, 1 dec) * 6 = 18 sc.

24) (1 sc, 1 dec) * 6 = 12 sc.

25) a row of 6 decreases, sl-st. Cut the thread, hide the tip.

Muzzle

The thread is cherry color.

1) 6 ch

2) In the second loop from the hook, inc, 3 sc, 4 sc in one loop, 3 sc, inc = 14

3) 2 inc, 3sc, 4inc, 3 sc, 2 inc, = 22 sc.

4) (1 sc, inc) * 2, 3sc, (1 sc, inc) * 4, 3 sc, (1sc, inc) * 2 = 22 sc.

5) Sl-st, cut the thread, leaving the tip for sewing.

Ears

The thread is cherry color.

1) İNTO MAGİC RİNG – 6 sc

2) 6 inc = 12 sc.

3) (1 sc, 1 inc) * 6 = 18 sc.

4) (2 sc, 1 inc) * 6 = 24 sc.

5) (3sc, 1 inc) * 6 = 30 sc.

Cut the thread, leaving the tip for sewing.

I preferred to steam them so that they would not twist.

Body

1) İNTO MAGİC RİNG – 6 sc

2) 6 inc = 12

3) (1 sc, 1 inc) * 6 = 18 sc.

4) (2 sc, 1 inc) * 6 = 24 sc.

5) (3 sc, 1 inc) * 6 = 30 sc.

6) (4 sc, 1 inc) * 6 = 36 sc.

7) (5 sc, 1 inc) * 6 = 42 sc.

8) (6 sc, 1 inc) * 6 = 48 sc.

 We knit 9 – 15 rows of 48 sc.

16) (20 sc, 2 dec) * 2 = 44 sc.

17) (20 sc, 1 dec) * 2 = 42 sc.

18) 42 sc.

19) (5 sc, 1 dec) * 6 = 36 sc.

20) 36 sc.

21) (4 sc, 1 dec) * 6 = 30 sc.

22) 30 sc. 23) (3 sc, 1 dec) * 6 = 24 sc.

24) 24 sc.25) (2 sc, 1 dec) * 6 = 18 Cut the thread, leaving the tip for

sewing on.

Horns (2 things)

The thread is black.

1) 16 ch, close in the ring and

we knit 3 rows of 16 sc.

4) 1 sc, 1 dec, 13 sc = 15 sc.

5) 1 sc, 1 dec, 12 sc = 14 sc.

 6 – 8 rows of 14 sc.

9) 1 sc, 1 dec, 11 sc = 13 sc.

10) 1 sc, 1 dec, 10 sc = 12 sc.

11) 6 sc, 1 dec, 4sc = 11 sc.

12) 6 sc, 1dec, 3 sc = 10 sc.

13) 6 sc, 1 dec, 2 sc = 9 sc.

 13 – 18 rows of 9 sc.

19) 3 sc, 1 dec, 4 sc = 8 sc.

20) 3 sc, 1 dec, 3 sc = 7 sc.

21) 3 sc, 1 dec, 2 sc = 6 sc.

22 and 23 rows of 6 sc.

24) 3 dec.

Cut the thread, hide the tip.

Legs

(2 things)

Black thread

1) İNTO MAGİC RİNG – 6 sc

2) 6 inc = 12 sc.

3) (1 sc, 1 inc) * 6 = 18 sc.

4) (2 sc, 1 inc) * 6 = 24 sc.

5) For the rear walls of the loop 24 sc.

6) 24 sc for both walls of the loop.

7) Change color to cherry, for

back walls of a loop 24 sc.

 8 – 9 rows for both loop walls of 24 sc.

10) 11 sc, 1dec, 11 sc = 23 sc.

11) 11 sc, 1 dec, 10 sc = 22 sc.

12) 11 sc, 1 dec, 9 sc = 21 sc.

13) 11 sc, 1 dec, 8 sc = 20 sc.

14) 20 sc., Sl-st, thread cut,

Pens

(2 things)

The thread is black.

1) İNTO MAGİC RİNG – 6 sc

2) 6 inc = 12 inc

3) (1 sc, 1 inc) * 6 = 18 sc.

4) Behind the rear wall of the loop 18 sc.

5) 18 sc for both walls of the loop.

6) Cherry color change, 18

sc behind the back of the loop.

 7 – 9 rows of 18 sc for both

loop walls.

10) 14 sc, 1 dec, 2 sc = 17 sc.

11) 14 sc, 1 dec, 1 sc = 16 sc.

12) 14 sc, 1 dec = 15 sc.

13) 15 sc.

Thread cut, leaving

tip for sewing.

Tail

Cherry Blossom

1) 6 ch

2) From 2 to 18 rows we knit 6 sc each

Thread cut, leaving the tip

for sewing.

Making a thread brush

black color.

Comb your hair.

For nostrils I used threads

black gamma iris (İNTO MAGİC RİNG 6 sc, sl-st)

We stuff details (I’m not a tail stuffed), sew, stick eyes.

And your goby, ready!

More Amigurumi Goat İdeas

Materials

• Yarn : Alize Cotton Gold and Yarn-Art Dolce
• Hook size: 2 and 3,5 mm

Head (with Alize Cotton Gold)
Rnd 1. 6sx in magic ring
Rnd 2. 6inc (12)
Rnd 3. (1sc,1inc)*6 (18)
Rnd 4. (2sc,1inc)*6 (24)
Rnd 5. (3sc,1inc)*6 (30)
Rnd 6. (4sc,1inc)*6 (36)
Rnd 7 – 12. 36sc
Rnd 13. (4sc,1dec)*6 (30)
Rnd 14. – 15. 30sc
Rnd 16. (3sc,1dec)*6 (24)
Change the hook 3,5 mm and change the yarn continiue Yarn art Dolce
Rnd 17. – 19. 24sc
Rnd 20. (2sc,1dec)*6 (18)
Rnd 21. (1sc,1dec)*6 (12)
Rnd 22. 6dec(6)

Ears * 2 (with Alize Cotton Gold)
Rnd 1. 6sx in magic ring
Rnd 2. 6inc (12)
Rnd 3. – 9. 12sc

Body (with Yarn Art Dolce)
Rnd 1. 6sx in magic ring
Rnd 2. 6inc (12)
Rnd 3. (1sc,1inc)*6 (18)
Rnd 4. (2sc,1inc)*6 (24)
Rnd 5. (3sc,1inc)*6 (30)
Rnd 6. (4sc,1inc)*6 (36)
Rnd 7. – 10. 36sc
Rnd 11. (4sc,1dec)*6 (30)
Rnd 12. 30sc
Rnd 13. (3sc,1dec)*6 (24)
Rnd 14. 24sc
Rnd 15. (2sc,1dec)*6 (18)
Rnd 16.18sc
Rnd 17. (1sc,1dec)*6 (12)
Rnd 18. 6dec (6)

Legs * 2 (with Alize Cotton Gold)
Rnd 1. 6sx in magic ring
Rnd 2. 6inc (12)
Rnd 3. (1sc,1inc)*6 (18)
Rnd 4. – 6. 18sc
Rnd 7. (1dec,7sc)*2 (16)
Rnd 8. (1dec,6sc)*2 (14)
Rnd 9. (1dec,5sc)*2 (12)
Rnd 10. (1dec,4sc)*2 (10)
Rnd 11. (1dec,3sc)*2 (8)
Rnd 12. – 27. 8sc

Arms * 2 (with Alize Cotton Gold)
Rnd 1. 6sx in magic ring
Rnd 2. 6inc (12)
Rnd 3. – 6. 12sc
Rnd 7. (1dec,4sc)*2 (10)
Rnd 8. (1dec,3sc)*2 (8)
Rnd 9. – 22. 8sc

Tail (with Yarn Art Dolce)
Rnd 1. 6sx in magic ring
Rnd 2. 6inc (12)
Rnd 3. 6dec (6)

More Amigurumi Sheep İdeas

Pattern: ÉLÉPHANT CROCHET

Material:

• 4mm hook, padding, upholsterer needle without point, snap eyes, 4 carafe caps (optional) for flat leg shape, 2 large wooden buttons (optional) for saddle, 2 wooden buttons boys (optional) for bridle and whinny or canter sound box (optional).

Stamen:

A. 200 grams of White yarn. (head, body, legs and mane).

B. 100 grams of mahogany brown stamen (spots on the body, head, legs, ears and mane)

C. 50 grams of light brown stamen (hooves, frenulum, girth and saddle).

D. 50 grams of chocolate brown yarn (saddle)

Abbreviations:

SC: Half a point; insert the hook in the next point, make a loop and pull out one point (2 points in hook), make a loop and pass it through the two points on the hook.

HDC: Half high point; make a loop, insert the hook at the next point and pull out another loop (3 points on the hook) make another loop and pass it through the 3 points on the hook.

DC: High Point; make a loop, pass the hook through the stitch, make a loop pass the strand through the return point, make a loop and pass through two of the strands on the hook, make a loop and pass it through the remaining two strands in the hook.

İNC: Increase; do two SC at the same point.

DEC: Decrease; insert the hook through the front strand of the following two points, make a loop and pass it between these points, make a loop and pass it through the 2 points on the hook.

SL-ST: Dwarf or Slipped Point; insert the hook at the next point, make a loop and pull it out through the point on the hook.

CH: Chain.

PTOS: Points.

REAR LEGS: Make 2

Row 1: Make a 6SC ring with yarn C.

Row 2: 6İNC. 12 pts

Row 3: [1SC, 1İNC] 6 times. 18 pts

Row 4: [2SC, 1İNC] 6 times. 24 pts

Row 5: [3SC, 1İNC] 6 times. 30 pts

Row 6: 30SC on the back yarn.

Row 7:30 SC.

Row 8: [3SC, 1DEC] 6 times. 24 pts

Change to yarn A.

Row 9 at 15:24 SC.

From this round, stamens A and B begin to alternate to form spots. If you wish, you can omit the changes so that the legs are of a single color.

Row 16: B 3SC, A 20SC, B 1SC.

Row 17: B 5SC, A 17SC, B 2SC.

Row 18: B 6SC, A 16SC, B 2SC.

Row 19: B 5SC, A 19SC.

Row 20: B 4SC, A 6SC, B 4SC, A 10SC.

Row 21: A 1SC, B 2SC, A 7SC, B 5SC, A 9SC.

Row 22: A 10SC, B 6SC, A 8SC.

Row 23: A 11SC, B 6SC, A 7SC.

Row 24: A 12SC, B 5SC, A 7SC.

Row 25: A 13SC, B 3SC, A 8SC.

Row 26: At 24SC.

Fill, cast off with 1SL-ST leaving a long strand to join the body.

Note: You can place the carafe lids at the bottom of each leg before filling to give a flat effect to each leg, placing the sound box on one of the legs.

FRONT LEGS:

Make 2

Row 1: Make a 6SC ring with yarn C.

Row 2: 6İNC. 12 pts

Row 3: [1SC, 1İNC] 6 times. 18 pts

Row 4: [2SC, 1İNC] 6 times. 24 pts

Row 5: [3SC, 1İNC] 6 times. 30 pts

Row 6: 30SC on the back yarn.

Row 7:30 SC.

Row 8: [3SC, 1DEC] 6 times. 24 pts

Change to yarn A.

Row 9 at 13:24 SC.

From this round, stamens A and B begin to alternate to form spots. If you wish, you can omit the changes so that the legs are of a single color.

Row 14: B 2SC, A 22SC.

Row 15: B 4SC, A 20SC.

Row 16: B 4SC, A 20SC.

Row 17: A 2SC, B 2SC, A 20SC.

Row 18: A 3SC, B 1SC, A 20SC.

Row 19: At 24SC.

Row 20: A 4SC, B 3SC, A 17SC.

Row 21: A 4SC, B 3SC, A 17SC.

Row 22: A 3SC, B 6SC, A 15SC.

Row 23: A 3SC, B 9SC, A 12SC.

Row 24: A 3SC, B 10SC, A 11SC.

Row 25: A 2SC, B 12SC, A 10SC.

Row 26: A 2SC, B 12SC, A 10SC.

Fill, cast off with 1SL-ST leaving a long strand to join the body.

HEAD:

Row 1: Make a 6SC ring with yarn A.

Row 2: 6İNC. 12 pts

Row 3: [1SC, 1İNC] 6 times. 18 pts

Row 4: [2SC, 1İNC] 6 times. 24 pts

Row 5: [3SC, 1İNC] 6 times. 30 pts

From this round, stamens A and B begin to alternate to form spots. If you wish, you can omit the changes so that the head is of a single color.

Row 6: B 3SC, A 9SC, B 3SC, A 14SC, B 1SC.

Row 7: B 4SC, A 8SC, B 4SC, A 12SC, B 2SC.

Row 8: B 5SC, A 6SC, B 7SC, A 10SC, B 2SC.

Row 9: B 6SC, A 5SC, B 8SC, A 9SC, B 2SC.

Row 10: B 6SC, A 5SC, B 8SC, A 9SC, B 2SC.

Row 11: B 7SC, A 6SC, B 7SC, A 7SC, B 3SC.

Row 12: B 5SC, A 9SC, B 7SC, A 6SC, B 3SC.

Row 13: B 5SC, A 8SC, B 8SC, A 7SC, B 2SC.

Row 14: B 7SC, A 5SC, B 11SC, A 4SC, B 3SC.

Row 15: B 4SC, 1İNC, 2SC, A 2SC, 1İNC, 2SC, B 2SC, 1İNC, 4SC, 1İNC, 4SC, 1İNC, A 2SC, B 2SC, 1İNC. 36 pts

Row 16: B 5SC, 1İNC, 4SC, A 1SC, 1İNC, 1SC, B 4SC, 1İNC, [5SC, 1İNC] 3 times. 42 pts

Row 17: B 6SC, 1İNC, 6SC, A 1İNC, B [6SC, 1İNC] 4 times. 48 pts

Row 18: B 14SC, A 3SC, B 31SC.

Row 19: B 12SC, A 7SC, B 29SC.

Row 20: B 12SC, A 8SC, B 28SC.

Row 21: B 12SC, A 9SC, B 27SC. Row 22: B 12SC, A 9SC, B 27SC.

Row 23: B 13SC, A 9SC, B 26SC.

Row 24: B 16SC, A 4SC, B 28SC.

Row 25: B 17SC, A 2SC, B 29SC.

Continue with yarn B.

Row 26 at 28:48 SC.

Place pressure eyes on row 17 leaving 12 stitches between them and start filling as you knit.

Row 29: [6SC, 1DEC] 6 times. 42 pts

Row 30: 42SC.

Row 31: [5SC, 1DEC] 6 times. 36 pts

Row 32: [4SC, 1DEC] 6 times. 30 pts

Row 33: [3SC, 1DEC] 6 times. 24 pts

Row 34: [2SC, 1DEC] 6 times. 18 pts

Row 35: [1SC, 1DEC] 6 times. 12 pts

Finish filling.

Row 36: 6DEC. 6 pts

Bind off with 1SL-ST leaving a small strand to go through the remaining six stitches, pull to close, tie a knot and hide the strand.

BODY:

Row 1: With yarn B make 24CH, and 1SL-ST in the first chain to form a circle.

Row 2 and 3: 24SC.

Row 4: 1İNC, 23SC. 25Pts

Row 5: 25SC.

Row 6: 1İNC, 24SC. 26Pts

Row 7: 26SC.

Row 8: 1İNC, 25SC. 27Pts

From this round, stamens A and B begin to alternate to form spots. If you wish, you can omit the changes so that the body is of a single color.

Row 9: A 5SC, B3SC, A 5SC, B 2SC, A 3SC, B 4SC, A 1SC, B 2SC, 2SC. 27 pts

Row 10: A 1İNC, 2SC, B 3SC, A 6SC, B 4SC, A 3SC, B 2SC, A 6SC. 28Pts

Row 11: A 3SC, B 3SC, A 3SC, B 2SC, A 5SC, B 3SC, A 9SC. 28 pts

Row 12: A 1İNC, 4SC, B 1SC, A 3SC, B 1SC, A 4SC, B 3SC, A 11SC. 29 pts

Row 13: A 5SC, B 3SC, A 1SC, B 4SC, A 2SC, B 6SC, A 8SC. 29 pts

Row 14: A 1İNC, 3SC, B 5SC, A 1SC, B 4SC, A 1SC, B 9SC, A 5SC. 30Pts

Row 15: A 10SC, B 9SC, A 11SC. 30 pts

Row 16: A 21CH, 20SC starting from the second chain from the hook, around the points of round 15 10SC, B 10SC, A 10SC, 19SC on the other side of the chains, 1İNC. 71 pts

Row 17: A [7SC, 1İNC] 3 times, 4SC, B 3SC, 1İNC, 7SC, 1İNC, 1SC, A 6SC, 1İNC, [7SC, 1İNC] 2 times 6SC, 3SC together at the last stitch. 81 pts

Row 18: A [6SC, 1İNC] 4 times, B [6SC, 1İNC] 2 times, 4SC, A 2SC, 1İNC, [6SC, 1İNC] 3 times, 8SC, 3İNC. 94 pts.

Row 19: A [9SC, 1İNC] 3 times, 2SC, B 7SC, 1İNC, 9SC, 1İNC, 2SC, A 7SC, 1İNC, [9SC, 1İNC] 3 times, [1SC 1İNC] 2 times. 105 pts

Row 20: B 3SC, A 38SC, B 15SC, A 39SC [1İNC, 2SC] 3 times, B 1SC. 108 pts.

Row 21: B 1İNC, 3SC, A 6SC [1İNC, 9SC] 3 times, B 1İNC, 9SC, 1İNC, 5SC, A 4SC [1İNC, 9SC] 4 times, 1İNC, 5SC, B 2SC. 119 pts

Row 22: B 7SC, A 39SC, B 15SC, A 56SC, B 2SC. 119 pts

Row 23: B 8SC, A 39SC, B 14SC, A 56SC, B 2SC. 119 pts

Row 24: B 10SC, A 36SC, B 16SC, A 55SC, B 2SC. 119 pts

Row 25: B 10SC, A 36SC, B 16SC, A 56SC, B 1SC. 119 pts

Row 26: B 1DEC, 9SC, A [1DEC, 9SC] 3 times, 1DEC, 1SC, B, 8SC, 1DEC, 4SC, A 5SC, [1DEC, 9SC] 4 times, 1DEC, 6SC, B 1SC. 108 pts.

Row 27: B 10SC, A 33SC, B 11SC, A 54SC. 108 pts.

Row 28: B 13SC, A 27SC, B 19SC, A 49SC. 108 pts.

Row 29: B 13SC, A 27SC, B 19SC, A 49SC. 108 pts.

Row 30: B 13SC, A 27SC, B 19SC, A 49SC. 108 pts.

Row 31: B 13SC, A 27SC, B 19SC, A 49SC. 108 pts.

Row 32: B 13SC, A 27SC, B 19SC, A 49SC. 108 Pts.

Row 33: B 1DEC, 8SC, 1DEC, A 8SC, [1DEC, 8SC] 2 times, 1DEC, 1SC, B 7SC, 1DEC, 3SC, A 5SC, [1DEC, 8SC] 4 times, 1DEC, 6SC. 97 pts

Row 34: A 1DEC, 2SC, B 4SC, A 1SC, [1DEC, 7SC] 3 times, 1DEC, 3SC, B 4SC, 1DEC, A 7SC, [1DEC, 7SC] 4 times, 1DEC, 5SC. 86 pts.

Row 35: A [1DEC, 4SC] 14 times, 2SC. 72 pts

Row 36: At 24SC, [1DEC, 1SC] 5 times, 23SC, [1DEC, 1SC] 3 times, 1SC. 64 pts.

Row 37: A [1DEC, 1SC] 21 times, 1SC. 43 pts

Bind off leaving a long strand to sew lengthwise, fill and bind to the head.

EARS: Make 2

Row 1: With yarn B make 9CH, 4SC from the second point from the hook, 3HDC, 3HDC together on the last chain, 3HDC on the other side of the chains, 4SC, 1CH and turn.

Row 2: 5HDC, 3DC, 2DC together at the next stitch, 3DC, 5HDC.

Bind off with 1CH leaving a strand to join the head.

MOUNT:

Row 1: With yarn D make 9CH, 8SC from the second chain from the hook, 1CH and turn.

Row 2: 1İNC, 6SC, 1İNC, 1CH and flip. 10 pts

Row 3: 1İNC, 8SC, 1İNC, 1CH and flip. 12 pts

Row 4: 1İNC, 10SC, 1İNC, 1CH and flip. 14 pts

Row 5: 1İNC, 12SC, 1İNC, 1CH and flip. 16 pts

Row 6: 1İNC, 14SC, 1İNC, 1CH and flip. 18 pts

Row 7: 1İNC, 16SC, 1İNC, 1CH and flip. 20 pts

Row 8: 1İNC, 18SC, 1İNC, 1CH and flip. 22 pts

Row 9 at 11:22 SC, 1CH and flip.

Row 12: 22SC, 7CH.

Row 13: 28SC from the second chain from the hook, 7CH.

Row 14: 34SC starting from the second chain from the hook, 1CH and flip. 34 pts

Row 15 at 17:34 SC, 1CH and flip.

Row 18: 28SC, 1CH and flip (the remaining six stitches from this round will no longer be knitted). 28 pts

Row 19: 22SC, 1CH and flip (the remaining 6 stitches from this round will no longer knit). 22 pts

Row 20 and 21: 22SC, 1CH and flip.

Row 22: 1DEC, 18SC, 1DEC, 1CH and flip. 20 pts

Row 23: 1DEC, 16SC, 1DEC, 1CH and flip. 18 pts

Row 24: 1DEC, 14SC, 1DEC, 1CH and flip. 16 pts

Row 25: 1DEC, 12SC, 1DEC, 1CH and flip. 14 pts

Row 26: 1DEC, 10SC, 1DEC, 1CH and flip. 12 pts

Change to yarn C.

Row 27: Knit SC around the entire saddle by making increases in the corners to avoid gathering them.

Fill and top with 1SL-ST leaving a very long strand to attach to the body if you wish, you can place the large wooden buttons on both sides of the frame.

MOUNTING BELT:

Row 1: Make 15CH with yarn C, 14SC from the second chain from the hook, 10CH (for the first buttonhole through which the button of the mount will enter), 14SC on the other side of the first woven chains, 10CH ( for the second buttonhole) cast off with 1SL-ST and hide the strands.

Place the cinch on the lower part of the horse’s body.

FRENILLO: Make 2

Part 1: (Snout)

Row 1: With yarn C make approximately 30CH (increase or omit until you have enough to surround the horse’s snout) 1SL-ST in the first chain to form a circle,

Row 2: Knit from SC around all stitches (do not cast off).

Part 2: (Head)

Row 3: do approximately 45CH (enough to go from one side of the muzzle, go around the head and get to the other side of the muzzle), 1SL-ST on a stitch halfway through round 2, knit from SC over the chains, 1SL-ST at the next point where the chains were raised.

Part 3: (Reins)

Row 4: do approximately 90CH (enough to go from one side of the snout to the other leaving the necessary length to form the reins), knit from SC over all the chains, 1SL-ST at the next point where the chains were raised.

Cast off with 1CH and hide the strand.

NOTE: You can put wooden buttons on each end of the muzzle part to give it a better finish.

HORSEHAIR:

Pompadour: (make 2)

Cut 15 strands of yarn B approximately 15 centimeters long, tie in half and join to the horse’s forehead

Nape and neck: (make 5)

Cut 20 strands of yarn A and B approximately 30 centimeters long, tie in half and join to the horse’s forehead.

TAIL: (make 1)

Cut 30 strands of yarn A and B approximately 30 centimeters long, tie in half and join to the horse’s forehead.

More Amigurumi Horse Ideas: